Wi-Fi and app operation
The heater can also be controlled with an app on your smartphone. To do this, the
heater must be connected to a Wi-Fi modem. The installation of the App is
described in the manual APP operation.
Turning the WiFi connection on and off
- The heater should be ON, but should NOT heat and therefore, there is no
heating symbol visible on the heater’s display. (Do this by setting the
temperature lower than the ambient temperature using the – button, for
example.)
- Press the ON/OFF button for three (3) seconds to toggle between WiFi ON and
OFF.
WiFi symbol flashes on the display: WiFi connection is ON.
No WiFi symbol on the display: WiFi connection is OFF.
Attention: As soon as there is a WiFi connection, you can no longer use the timer
function on the remote control, which prevents contradictions.
As soon as there is a WiFi connection, the APP updates the time automatically and
therefore, you do not have to enter the time manually.
Safety feature
In case of internal overheating, the overheating safeguard will switch the heater
off. This may occur if the heater cannot give off enough heat or if it cannot draw in
enough fresh air. As mentioned above, this is generally caused by (partially)
covering the heater, or installing the heater too close to a wall or something
similar. In case of overheating, switch off the heater and unplug. Give the heater
time to cool down, remove the source of the overheating and use as normal. If the
problem persists or if you have not been able to trace the source of the
overheating, turn the heater off immediately and unplug. Contact a servicing point
to have the heater repaired.
Cleaning and Maintenance
Keep the heater clean. Switch off the heater, remove the plug from the socket and
allow the heater to cool down before cleaning or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions; This can cause irreparable scratches and damage! You can
use a glass cleaner for the ‘Verre’ models. Never use cloths that are too wet,
dry the appliance properly and ensure that the entire unit is dry before taking it
back into use.
You can keep the back of the heater free of dust with a feather duster. For
thorough cleaning of the back, you can take the heater from the wall.
If you want to store the Mon Soleil at the end of the season, remove it from the
wall, unscrew the suspension frame (if applicable) and store the entire unit (in
the original packaging) upright in a cool, dry and frost-free place.
