24
Important instruction to remove foam
Before using the appliance, first remove all the foam lamp protectors used to
protect the heating lamp during transport.
Start working as follows:
1. Place the appliance horizontally with the protective grid facing upwards and
remove both screws. It is important to keep the protective grid in its original
place!
2. Raise the protective grid slightly to the same side (the side where you removed
both screws). Make sure that the protective grid remains in the holders at the
other side. Now remove all the foam lamp protectors.
3. Put the protective grid back in its original place and mount it firmly using both
screws. Set up the appliance upright and check the fastening of the protective
grid.
Technical data
Warning electric heaters
Safety warning – general
1. Read the user instructions carefully and completely before using
(and installing) this device. Keep the instruction leaflet somewhere
safe so that you can consult it and pass it on in future.
2. Before use, check your new device (including cable and plug) for
any visible damage. Never use a damaged device but take it back
to the supplier for a replacement.
3. In the event of incorrect usage or installation, there is a risk of
electric shocks and/or a fire hazard.
