Attach the feet supplied to the underside of the heater (see picture):
Turn the heater upside down. Place a blanket (or something similar) under the
heater to prevent damage!
Place the feet on their place on the bottom of the heater. This will ensure that the
threaded holes will align correctly.
Securely attach the feet to the heater using the 2 x 2 short self-tapping screws.
Return the heater to the upright position.
Make sure a working heater is always placed on a solid, flat and horizontal
surface. Deep-pile carpeting is unsuitable!
Using for the first time and Operation
Check that the heater stands firmly and that all safety requirements have been
met.
Set the thermostat button to 'max'.
Now insert the plug into the earthed 220/-240V socket. The check lamp will
come on and the heater will start to work.
If the space has reached the required temperature, turn back the temperature
knob slowly until you hear a click. The heater will now retain the set temperature
by switching on and off at regular intervals. To set the temperature a little higher
or lower, turn the knob a little towards 'max' or 'min' respectively.
Turning the thermostat knob fully to 'min' will retain a temperature of 5°C in the
space, this is the frost protection functionality.
To switch the heater off, remove the plug from the socket.
Safety features
The heater is fitted with a tipping safeguard which automatically shuts off the
appliance if it inadvertently falls over. When the heater is returned to its upright
position, it will resume functioning as normal but, before reusing, switch off, unplug
and check for damage. Do not use the heater if it is damaged or malfunctioning, but
have it inspected/repaired!
In case of internal overheating, the overheating safeguard will switch the heater off.
This may occur if the heater cannot give off enough heat or if it cannot draw in
enough fresh air. As mentioned above, this is generally caused by (partially) covering
the heater, obstructing the air intake and/or outlet grills or installing the heater too
close to a wall or something similar. In case of overheating, switch off the heater and
unplug. Give the heater time to cool down, remove the source of the overheating and
use as normal. If the problem persists or if you have not been able to trace the
source of the overheating, turn the heater off immediately and unplug. Contact a
servicing point to have the heater repaired.
