43
Before using the air conditioner, check:
That it has been installed according to safety instructions
That it is not damaged or broken
That the electrical socket that you wish to use has the same voltage as is given on
the unit’s specification plate (220-240V / 50Hz)
That no other devices are connected to the same socket
If this has all been checked, you can insert the plug into the socket.
The control panel en the remote control have basically the same buttons.
Insert 2 batteries (AAA-1.5V) in the battery compartment at the back on the remote
control.
Switch the device on using the Power button. The display shows the last set
temperature.
1. Cooling function
Press on Mode until the Cool light shows on the display.
Set the desired temperature using the Temp+(Up)/Temp-(Down) button.
The display shows the set temperature. The temperature can be set to between
17 and 30°C.
Maintain an interval of at least 3 minutes between each on and off.
2. Dehumidifying function
Press on Mode until the Dry light shows on the display.
Display shows ‘DH’.
Check that the water outlet is correctly connected (see page 9).
The display automatically shows 2°C under room temperature.
The temperature cannot be changed.
The fan speed is set to low automatically.
Maintain an interval of at least 3 minutes between each on and off.
3. Heating function
Press on Mode until the Heat light shows on the display.
Set the desired temperature using the Temp+(Up)/Temp-(Down) button.
The display shows the set temperature. The temperature can be set to between
17 and 30°C.
Maintain an interval of at least 3 minutes between each on and off.
4. Timer function
Automatic start: the air conditioning unit stands standby. Press on Timer and
select the desired temperature using Temp+(Up)/Temp-(Down). If the display
shows 4, for example, the air conditioning unit will start in 4 hours.
Automatic stop: the air conditioning unit is on. Press on Timer and select the
desired temperature using Temp+(Up)/Temp-(Down). If the display shows 8,
for example, the air conditioning unit will switch off in 8 hours.
The timer can be set to between 1 to 24 hours.
