IMPORTANT QUESTION:
Q: Do I always need to use a Microber Pad when cleaning with my
Steamer?
A. YES!
It is critically important to ALWAYS use your Microber Pads. The
Floor Steamer should NEVER be used without either a Hard Surface
Floor Pad or Carpet Glide with Carpet Pad.
Troubleshooting
Issues Possible Causes Solutions
Steam is not coming out of the Improper Handle assembly. Call Customer Service to receive instructions
Steam Nozzles. to correct the problem.
The Hard Surface Floor Pad Not enough pressure was Position Steamer about 2” above Pad and
is not adhering to Steamer. applied when attaching Pad. FIRMLY press it down onto the Pad.
The Cleaning Pads are getting Boiler is overfilled. Let Steamer run until excess water ceases.
soaked (too wet). Why? -OR- Remove some water from Boiler.
Green “Steam Ready Indicator Wait for green “Steam Ready Indicator Light”
Light” is not illuminated. to illuminate.
The steam seems to be Steam Nozzles are being used Only use Steam Nozzles in short bursts for
making my floor too wet. too frequently. cleaning tougher stains or to clean hard to
reach areas.
The Cleaning Pad is too wet Replace the wet Pad with a dry, clean Pad
(saturated with moisture) and continue cleaning.
EZ1 (Australia) 7/18/11
EFLX-039AA
EUROFLEX AUSTRALIA PTY LTD
P.O. Box 1395
Wangara WA 6947
Australia
Customer Support Line:
1800 663 866
euroex.com.au
EUROFLEX NEW ZEALAND LTD
P.O. Box 305 650
Triton Plaza, North Shore 0757
New Zealand
Customer Support Line:
0800 666 783
euroex.com.au
Patent Pending
EUROFLEX srl
Via dei Colli, 153 • 31058 Susegana (TV) Italy • tel. ++39.0438.661711 • fax. ++39.0438.661712
http: www.euroex.tv0 • E-MAIL: euroex@euroex.tv