783789
14
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
24 25
English English
Currently this feature only supports English, German, French, and
Spanish. You can check regularly if more languages are supported at
https://www.eufylife.com/support/.
Set Up Virtual Wall / Boundary Strip
Virtual Wall (Available on the App Only)
In the EufyHome app, you can set up a “No-Go Zone” or “Virtual Wall” as a restricted area.
This eliminates the need to use physical barriers, including Boundary Strips. This feature is
only designed for dividing the cleaning zones, not for isolating hazardous areas.
No-Go Zone: RoboVac will not enter the zone to vacuum.
Virtual Wall: RoboVac will not cross the virtual wall.
To set a virtual wall, RoboVac must initially perform a cleaning run to
create a floor plan.
Although a virtual wall is set, RoboVac may still enter the restricted zone
due to repositioning failure or abnormal sensors.
Moving the device or changing the environment may lose the virtual wall
and cause mapping to fail and rebuild.
Boundary Strips
Boundary strips (sold separately) can keep RoboVac away from hazardous areas.
RoboVac will recognize the barriers and will not cross into the blocked-off area.
1. Identify the area or item you do not want RoboVac to get close to.
2. Place the boundary strips FLAT on the floor or under a rug.
Do not place the boundary strips under a THICK rug as RoboVac may fail to
recognize the boundary strip.
Make sure the boundary strips are placed on the same surface plane
RoboVac is used on.
If the boundary strips roll up, remove and then re-apply to the floor with
adhesive tape. Otherwise the boundary strips may not work well.
Cleaning and Maintenance
Before cleaning and maintaining, turn off the device and unplug the adapter.
For optimal performance, follow the instructions below to clean and maintain RoboVac
regularly. The cleaning/replacement frequency will depend on your RoboVac usage
habits.
Recommended cleaning/replacement frequency
RoboVac Part Cleaning Frequency Replacement Frequency
Dust Collector After each use -
Filter Once every week Every 3 months
Rolling Brush Once every week Every 6-12 months
Side Brush Once every month Every 3-6 months (or when
visibly worn)
Brush Guard Once every month Every 3-6 months (or when
the silicone rubber strip on the
brush guard becomes visibly
worn)
Sensors Once every month -
Charging Pins Once every month -
Swivel Wheel Once every month -
Clean the Dust Collector and Filter
1
Press the dust collector release button to pull the dust collector out.
2
Open and empty the dust collector.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eufy RoboVac X8 - T2262 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eufy RoboVac X8 - T2262 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Turks als bijlage per email.

De handleiding is 13.84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info