• Turn the blocking systems (16) on the right and then on the left (pull them tight) with the
provided crank (13) in clockwise direction, until the bicycle carrier and the deck lid form a
compact and solid entity. Then you have to screw down the counter nuts (22) firmly. Finally
check again if all the turning handles, blocking pins, and screws are locked properly.
HOW TO FASTEN THE BICYCLES ON THE MOUNTED BICYCLE CARRIER:
(See the images no 8 and 9.)
• First remove the accessories and all movable objects (like bottles, the bicycle pump, etc.).
• Do not cover the bicycles with objects which could be loosened by the airflow. Remove all
parts from the bicycles which could loosen themselves during the ride. Also fasten the
bicycles’ front wheels.
• Depending on the type of your vehicle you sometimes have to turn the bicycles’ handlebars a
bit and to pay attention to the pedals.
• It is important to fix the bicycles on the carrier rails in opposite direction to each other.
The handlebar of the first bicycle should be on the right and the handlebar of the second one
on the left. See to it that the pedals, the handlebars, and the metal parts do not touch your
vehicle.
• Fasten the first bicycle with the aid of the short frame holder (21) to the upper tube (1), like it
is shown in image no 8.
• Then fix the wheels with the fixing belts (12), like shown in image no 8: take two of these belts
for the front wheel and one for the back wheel.
• Fasten the second bicycle with the aid of the long frame holder (11), like it is shown in image
no 9.
• Fix its wheels with the belts (12) just like described above for the first bicycle.
• Now secure both bicycles with the safety belt (14) which you have to put around the
supporting tube of the carrier. Finally check if the bicycles are mounted firmly on the carrier.
• After that you have to make sure that the vehicle, the carrier, and the bicycles form a compact
entity and that no part has loosened itself.
• Depending on the form of your bicycles’ frames it can be necessary to use additional fixing
belts or fastening systems.
IMPORTANT:
• The number plate and the rear lights of your vehicle may not be covered.
• You can charge the bicycle carriers “LOGIC Model EASY BIKE“ and “EASY BIKE Alu Plus “
with up to two bicycles with a maximum total weight of 30 kg.
• If your vehicle disposes of rear windscreen wipers, their functioning can be restrained by the
carrier. Perhaps it is better to dismount them.
Warning:
If you lift the deck lid of your car this rotary motion can change the gap width. This in turn can
cause damage to the car body.
SAFETY INSTRUCTIONS:
• This bicycle carrier has been designed, constructed, and tested with care and according to the
corresponding safety regulations.
• If the deck lid is charged with the carrier, the total charge is allocated differently on the wheels’
axles than originally intended by the manufacturer. Weigh your vehicle with its charge and
make sure that the weight per axle does not surpass the intended maximum weight. If you want
to use the carrier on the draw bar, you have to observe the angular separation for the trailer
