ELECTRICAL CONNECTION
33
32
INSTALLATION
■ The distance between drawer A and the
hob should be at least 10 mm. No extra
modifications for ventilation need be made
where there is a fixed panel (see fig. 11).
Fig. 11: Drawer under hob
Attention
Ensure that the connection cables hang
freely. If there is a drawer underneath the
hob, make sure that the contents do not
project above the edge of the drawer and
interfere with the ventilation.
Installation of the induction hob above a combi-
microwave oven, microwave oven or oven
Fig. 12
e
Saw out the ventilation opening(s), making sure
that the total surface of the holes is a minimum
of 100 cm
2
. See fig. 12, for example, showing
2 holes of 50 cm
2
.
r
Fit a protective plate between the oven and
the hob. The plate should be at least 10 mm
thick and heat-resistant (85 °C). The space
between the underside of the hob and the
protective plate must be at least 50 mm.
t
To protect the air flow, fit a protective panel - of
the same material as the protective plate -
between the protective plate and the hob.
Ventilation is via the adjoining cupboards.
Fig. 13
Fig. 14
min.
min.
min.
