783506
17
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
3332
immediately and contact an official repair or service centre. Do not attempt
to repair any damage yourself.
Unplug the machine before removing any detachable parts and before
cleaning the machine. This is to prevent the risk of short circuit and
electrical shock.
Before connecting the appliance to a power source, make sure the appliance
is correctly assembled.
Do not use the machine without ingredients to prevent damage to the
moving parts of the unit.
The machine should be placed on a horizontal and stable surface. To
prevent damage to the machine, do not place it on a sloping surface, carpet,
textile, plastic, paper or flammable materials.
The unit is equipped with an overload and damage protection system. This
switches the machine off automatically after 15 minutes of continuous
use. Unplug the machine and wait at least 30 minutes after an automatic
switch-off before resuming pressing to allow the machine to cool down.
If the press chamber becomes overloaded or obstructed during pressing,
the machine will stop automatically and continue automatically after a few
seconds. If the machine stops again after this, use the reverse function to
clear the chamber. If this does not work, switch off, unplug the machine,
clean the machine and remove the ingredients before continuing with the
pressing.
If the machine beeps after starting or during operation and the control
buttons do not work, unplug it and disassemble, clean and restart it
according to the instructions. If the problem persists, contact an authorized
repair center or authorized dealer.
All parts of the machine that come into contact with food during pressing,
comply with all certification requirements for materials in contact with food.
Plastic parts which come in contact with food such as carrots and beets may
become discolored. This phenomenon is normal and not harmful to your health.
Clean the removable parts immediately after each use of the unit. Be careful
when cleaning the parts to avoid damage or injury.
Do not use abrasive, corrosive, strong, or aggressive detergents to clean the
unit or its parts. Do not heat, wash in dishwasher or clean at temperatures
or agents higher than 60°C.
Standby mode: When the device has not been used for more than 5 minutes,
it automatically switches to standby mode to save energy consumption.
This device is intended for domestic use and similar applications. Do not use
the device outdoors.
Store and operate the unit only in dry and heated areas and not in an
ambient temperature below 5°C or a relative humidity above 80%.
Repairs and maintenance on the appliance should only be carried out by
authorized Espressions service points. As Espressions regularly works to
improve its products, designs and specifications may change.
Pack and protect the unit carefully during transport and storage.
Important guidelines for safe slow juicing
For efficient and safe operation of the appliance, it is recommended to cut
the ingredients into smaller pieces before pressing. It is recommended to
cut harder and tough pieces of fruits and vegetables smaller than 5 x 5 cm
and to add and press them one by one.
Fruits and vegetables that contain no or virtually no juice such as banana
and avocado are not suitable for pressing.
Peel ginger and cut it into pieces of approximately 4 cm before pressing in
order to prevent damage to the appliance.
Fruits with pips and large hard seeds (plums, peaches, grapes, kakis,
apricots, mangoes, etc.) as well as fruits with firm skin (citrus fruits, mango,
etc.) may clog, overload and damage the juicer. Carefully remove pits, seeds
and peels before pressing to prevent damage to the appliance.
The machine is not suitable for pressing coconut, sugar cane and other
fibrous foods.
Peel citrus fruits before squeezing them.
IMPORTANT
Clean the fruit carefully and cut it into smaller pieces prior to pressing so that the pressing screw
can feed and press it properly. If pieces remain in the hopper, use only the provided pusher to
push them towards the squeezing screw. If ingredients are stuck so tightly that they cannot be
pushed through with the pusher, use the reverse function to rotate in the opposite direction. If
the ingredients continue to block the Smart Slow Juicer, unplug and remove the hard pieces.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Espressions EP6900 s Smart Slow Juicer bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Espressions EP6900 s Smart Slow Juicer in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4.99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info