DTMF Tones
You can use your phone to send DTMF (Dual Tone Multi
Frequency) tones. This feature can be used for a variety of purposes,
such as banking by phone or controlling an answering machine.
Automatic DTMF
You can send DTMF tones during a call. You can send the
characters0–9,*, and # as DTMF tones by pressing the
corresponding keys.
The DTMF Pause Function
If you wish to send a code, for example your personal access
number, it might be helpful to use the pause function. Before you
make the call, enter both the phone number and the code, separated
by a pause character.
How to Make a Call and Send a Code
1. Enter the required phone number.
2. Select the
SPECIAL CHARACTERS menu by pressing the right
arrow. Press YES.
3. Enter a pause character by pressing YES or by holding down *.
The letter ‘p’ appears in the display.
4. Enter the code you wish to send. The code can be a combination
of the digits0–9andthecharacters * and #.
5. Press YES to make the call.
When the call has been connected, the phone number disappears
from the display. The code is sent automatically, character by
character, after a short delay. The message Sending is displayed
while the code is being sent.
How to Use Several Pauses
It is possible to enter several pauses. For example:
Phone no ‘p’. Code1 ‘p’ Code2
• When the call has been connected, the code, following the first
pause character, will be sent automatically. To send the next code,
press YES.
Pre-programmed DTMF Signalling
You can store a code in the phone book in the same way as you
store a phone number. The code can be any combination of the
characters 0– 9, * and #.
The maximum number of characters that you can store in the card
memory depends on your SIM card. In the phone memory you can
store up to 80 characters.
34 EN/LZT 126 1353 R1B
