757008
17
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
BV 20 B-L
15
6. INSTALLATION AND TEST RUN
1 Having unpacked the box, you should check if all the accessories are
complete.
2 The lathe should be installed on a rigid bed plate made of wood or iron, to
prevent the machine from vibrating when it starts running; this will have an
effect on the accuracy of its operation.
3 Please use a leveller to level off the lathe while installing it.
4 All parts must be cleaned with gasoline or coal oil.
5 Fully fill up the lubricating holes and the lubricating surfaces at different
parts of the machine tool with lube, check all the operating hands to see
whether the tightness is proper of the longitudinal travel of saddle and the
transverse movements of carriage, otherwise making adjustment with plug
iron.
6 Before the start-up of the machine tool, you must make a thorough check
over all the electric parts of the motor so as to avoid the current leakage
and any other accidents because of the damage of electric circuit during the
transportation.
7 Please check the tringle belt pulley to see whether the tightness is proper,
otherwise making an adjustment with the middle belt pulley.
8 On the first starting of test run, you should select the lowest step of running
speed and start the machine tool to run for 20 minutes to see if there is any
unusual phenomenon with it, if there is not, you can increase the running
speed gradually.
7. OPERATION AND MAINTENANCE
Regular maintenance will increase durability and reliability.
Change the lube inside the headstock at least once a year.
Every day, before setting to work, you should fill up the lubricating holes at
different parts of the lathe with machine oil.
In use, chips falling onto all the sliding surfaces should be cleaned in time.
After having done the work each day, you must clean out the chip and wipe all
parts of the machine tool, and coat it with machine oil in order to prevent the
machine from rusting.
To change the rotational speed of the spindle box, first of all, you must stop
the machine, and switch it according to the required speed and refering to the
operating position on the indicating plate.
In use, pay attention to avoid the machine oil splashing into the inside of the
motor or onto the triangle belt pulley, or the electric motor and the triangle belt
will be damaged. The triangle belt would be lengthened after being used for a
certain period of time, it’s tightness can be adjusted with the motor slide and
the middle belt pulley.
Do not place any tools, parts and other sundries on the surface of the
guideway so as to avoid the damage to the accuracy of the guideways.
If you want to change the direction of the motor rotation, you must key STOP
firstly.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ergofix BV 20 B-L bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ergofix BV 20 B-L in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info