216263
25
Verklein
Vergroot
Pagina terug
1/153
Pagina verder
User’s Guide
Notations Used in This Guide
Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
q
Indicates additional information and points which may be useful to know regarding a topic.
s Indicates a page where detailed information regarding a topic can be found.
g
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix". s p.131
Procedure
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
[(Name)] Indicates the name of the buttons on the Remote Control or the Control panel.
Example: [Esc] button
"(Menu Name)"
Brightness
Indicates Configuration Menu items.
Example:
Select "Brightness" from the Image menu.
Image menu - Brightness
Troubleshooting
Using the Help ............................................. 93
Problem Solving ........................................... 94
Reading the Indicators.......................................... 94
t
indicator is lit or flashing red..................................95
m o indicator is flashing or lit orange..............................96
When the Indicators Provide No Help................................97
Problems relating to images....................................98
Problems when projection starts................................ 102
Problems relating to monitoring and control........................ 102
Problems relating to Easy Interactive Function.......................103
Other problems............................................ 104
Reading Error Notification Mail ............................ 106
Appendix
Cleaning Parts ............................................ 108
Cleaning the Projector's Surface ...................................108
Cleaning the Projection Window.................................. 108
Cleaning the Air Filter..........................................108
Replacing Consumables ................................... 110
Replacing the Remote Control Batteries............................. 110
Replacing the Lamp........................................... 111
Lamp replacement period.....................................111
How to replace the Lamp..................................... 111
Resetting the Lamp Hours..................................... 114
Replacing the Air Filter ......................................... 114
Air filter replacement period................................... 114
How to replace the air filter .................................... 114
Optional Accessories and Consumables .................... 116
Optional accessories.......................................... 116
Consumables............................................... 116
Screen Size and Projection Distance ........................ 117
Projection Distance (EB-460i/460)..................................117
Projection Distance (EB-450Wi/450W/440W) . . . . . . . . . . . . . . . . . . . . . . . . . . 117
List of Supported Resolutions ............................. 119
Supported Monitor Displays (EB-460i/460)............................ 119
Computer signals (analog RGB)................................. 119
Component Video.......................................... 119
Composite Video/S-Video .....................................119
Supported Monitor Displays (EB-450Wi/450W/440W).................... 119
Computer signals (analog RGB)................................. 119
Component Video.......................................... 120
Composite Video/S-Video .....................................120
ESC/VP21 Commands ..................................... 121
Command List...............................................121
Cable Layouts............................................... 122
Serial Connection.......................................... 122
Communications protocol..................................... 122
About PJLink ............................................. 123
Specifications ............................................ 124
Projector General Specifications...................................124
Appearance .............................................. 129
Glossary ................................................. 131
General Notes ............................................ 133
Wireless Telegraphy Act Regulations............................... 133
About Notations............................................. 133
General Notice.............................................. 133
Index .................................................... 151
Contents
5
Introduction
This chapter explains the projector's features and the part names.
Convenient Equipment Designed for Ease of Use
Easy to handle
Easy wall mounting
The projector is supplied with a dedicated slide plate that makes
troublesome wall mounting easy.
The slide plate is integrated into the projector main unit, so mounting is
easy and installation time has been reduced compared to previous models.
s Installation Guide
You can also perform maintenance such as replacing the air filter and
lamp simply while projector is mounted to a wall.
No special screen required
Installation in a wide range of places is possible because you can project
images onto a projection surface such as a wall if there is no projector
screen.
Short distance projection
At 47 cm, the recommended shortest projection distance allows you to
place the projector close to the screen.
s p.117
If you mount the projector to a wall and project images from diagonally
above, you can give your presentation without the shadow of anybody
who stands up near the projection surface appearing in the images.
Furthermore, when your back is facing the screen, the projector light does
not dazzle you because it does not interfere with your field of view.
Direct power on/off
In places where power is managed centrally, such as in a conference
room, you can set the projector to turn on or off when the main power
source to which the projector is connected is switched on or off.
Display of projection lines on the projection surface
The pattern function for projecting ruled lines or a grid enables effective
use of the projection surface in lessons and presentations.
Speaker
The incorporation of a high-output 10 W speaker enables your voice to
reach the edges of the room even in spacious classrooms.
Projection screen for WXGA (EB-450Wi/450W/440W only)
With a computer that has a 16:10 WXGA wide LCD display, the image
can be projected in the same aspect. This allows you to effectively use the
width of whiteboards and other landscape-oriented projection surfaces.
Control the projector from a computer
You can use the Web Control function and Web Remote function to
perform the same operations on a computer as with the projector's
control panel or remote control.
s
p.63
Enhanced security functions
Password Protect to restrict and manage users
By setting a Password you can restrict who can use the projector.
s p.50
Control Panel Lock restricts button operation on the Control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on.
s p.52
Equipped with anti-theft security devices
The projector is equipped with the following types of anti-theft security
functions.
s
p.53
Security slot
Security cable installation point
Projector Features
7
Controlling Computer on Projection Surface
(EB-460i/450Wi Only)
Easy Interactive Function
By simply connecting a computer to the projector, you can control the
computer on the projection screen and give an effective, interactive
presentation or lesson.
s p.54
Drawing function
You can use a graphics application to import text and diagrams have been
hand-drawn on the projection surface with an electronic pen (Easy
Interactive Pen). This combines the functions of a whiteboard and screen
without the need for either.
s p.54
Selecting Various Input Sources with Multi-
Connection
As well as connecting a computer cable, you can select various interfaces
such as a USB cable, USB memory, or LAN connection. This allows you to
select from a range of input sources to match your usage environment.
Taking full advantage of a network connection
You can make effective use of your network by using the supplied "EPSON
Projector Software for Meeting & Monitoring" to perform efficient and
varied presentations and meetings.
s
EasyMP Network Projection
Operation Guide
Connect a Computer to the projector via a network
You can project by connecting to an already constructed network system.
You can hold efficient meetings by projecting from multiple computers
connected to a network system without having to change any cables.
Connecting wirelessly to a computer
When you install the optional wireless LAN unit in the projector, you can
connect wirelessly to a computer.
s p.38
Projector Features
8
Connection method for various networks
The following methods are available for connecting the projector to a
network. Select whichever method suites your environment.
s EasyMP
Network Projection Operation Guide
Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, offering you a
method of connecting to an already constructed network.
Quick Connection Mode
Quick Connection Mode is a connection method that can only be executed
when the optional wireless LAN unit is installed.
Quick Connection Mode temporarily allocates the projector's SSID to the
computer and makes an ad-hoc connection, and then restores the comput‐
er's network settings after disconnecting.
Connecting with a USB cable and projecting (USB Display)
By simply connecting the supplied USB cable to a computer, you can
project images from the computer's screen.
s Quick Start Guide , p.23
Projecting a computer screen with the optional Quick Wireless
Connection USB Key
Using the optional Quick Wireless Connection USB Key, you can quickly
connect a computer to the projector for projection.
With the Quick Wireless Connection USB Key, you can connect to a
projector on a network even if EasyMP Network Projection is not installed.
For example, you can connect under the following environments.
Connect in Quick Connection Mode using the optional Wireless LAN
unit.
Connect to the network via an access point.
Connect to the network via a wired LAN connection.
Projector Features
9
s p.116
q
This projector is not compatible with the Network Projector
function which is a standard feature in Windows Vista and
Windows 7.
Limitations when projecting from Windows Media Center
When Windows Media Center is in full-screen mode, images cannot
be projected. Switch to the window display mode to project the
images.
Projecting JPEG images without connecting a computer
You can project a slideshow of JPEG images saved on a USB device such as
a USB compatible digital camera, hard disk, or USB memory by simply
connecting to the projector.
s p.28
Enlarge and project your files with the Document Camera
A USB compatible Document Camera is available as an optional extra.
With this Document Camera there is no need for a power cable. You can
connect easily with one USB cable, and its clean design really simplifies
projecting and enlarging your documents.
s p.34
Projector Features
10
Front/Top
Name Function
A
Remote Receiver
Receives signals from the remote control.
s Quick Start Guide
B
Lamp cover
Open this cover when replacing the projector's Lamp.
s p.111
C
Lamp Cover Fixing
Screw
Screw to fix the Lamp cover in place. s p.111
D
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
Do not place anything that can become warped or
damaged by heat near the air exhaust vents, or
bring your hands or face close to the vents while pro‐
jection is in progress.
Name Function
E
Cable cover fixing
screws
Screws to fix the cable cover in place.
s Quick Start Guide
F
Cable cover
When connecting to an input port, loosen the two screws
and open this cover.
s Quick Start Guide
G
Control panel
Allows you to operate and check the status of the
projector. s p.15
H
Speaker
Outputs audio for images currently being projected or
audio from the Microphone (Mic) input port.
Part Names and Functions
11
Sides
Name Function
A
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
B
Remote Receiver
Receives signals from the remote control.
s Quick Start Guide
Name Function
C
Easy Interactive
Function receiver
(EB-460i/450Wi only)
Receives signals from the Easy Interactive Pen.
s p.54
D
Projection window
Projects images.
Warning
Do not look at this during projection.
Do not place objects on or hand nears this. Doing
so is dangerous because the focus of projection
light results in high temperatures.
E
Wireless LAN unit
insertion slot
Insert the optional wireless LAN unit. s p.38
F
Focus lever
Adjusts the image focus.
Opens the air filter cover and operates the focus lever.
s
Quick Start Guide
G
Air filter cover
Open this cover when replacing the air filter or installing
the optional Wireless LAN unit.
H
Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the Air filter
regularly. s p.108, p.114
I
Air filter cover
open/close lever
Opens and closes the air filter cover. s p.114
Open this cover when installing the optional Wireless
LAN unit. s p.38
J
Security slot
The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s
p.53
Part Names and Functions
12
Interfaces
Remove the cable cover to view the following ports.
Remove the cable cover to connect equipment.
s
Quick Start Guide
Name Function
A
S-Video input port
Video input port
Audio-L/R input port
For S-video signals from video sources.
For composite video signals from video sources.
Connects to the audio output port to output audio from
equipment connected to the S-Video input port or the
Video input port.
s Quick Start Guide
B
Power inlet
Connects to the power cable.
s Quick Start Guide
Name Function
C
RS-232C port
When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s
p.122
D
Monitor Output
(Monitor Out) port
Outputs the image signals from the computer connected
to the Computer1 input port to an external monitor. This
is not available for component video signals or other
signals being input to any port other than the Computer1
input port. s p.35
E
USB(TypeB) port
Connects the projector to a computer via the supplied USB
cable to project images from the computer.
s p.23
Also use this port to connect to a computer via the
supplied USB cable to use the wireless mouse function.
s p.48
Also use this port to connect to a computer via the
supplied USB cable to use the Easy Interactive Function.
(EB-460i/450Wi only) s p.54
F
USB(TypeA) port
Projects a JPEG image Slideshow when memories or
digital cameras are connected to the USB compatible port.
s
p.28
Also connects to the optional Document Camera.
G
USB indicator
Notifies you of the status of the USB device connected to
the USB(TypeA) port as described below.
OFF: USB device is not connected
Orange Light ON: USB device is connected
Green Light ON: USB device is operating
Red Light ON: Error
Part Names and Functions
13
Name Function
H
Computer2 input port
Audio2 port
Inputs image signals from a computer and component
video signals from other video sources.
Connects to the audio output port of equipment
connected to the Computer2 input port to input audio.
Also, when the input source is one of the following and you
want to output audio from the projector, connect the
audio source to theAudio2 port.
- USB: When playing back a slideshow from a USB storage
device connected to the USB(TypeA) port, or when
projecting from the optional Document Camera
- USB Display
- LAN
s Quick Start Guide
I
LAN port
Connects to a LAN cable and then to a network.
s p.37
J
Computer1 input port
Audio1 port
Inputs image signals from a computer and component
video signals from other video sources.
Connects to the audio output port of equipment
connected to the Computer1 input port to input audio.
s Quick Start Guide
K
Microphone (Mic)
input port
Connects to a microphone. s p.36
L
Audio Output (Audio
Out) port
Outputs the audio of the images currently being projected
or the audio input from the Microphone (Mic) input port
to an external speaker. s p.36
Base (with Slide Plate)
A slide plate is attached to the projector main unit at the time of shipment.
Name Function
A
Slide plate
Connect this to the setting plate when mounting the
projector on a wall. s Installation Guide
B
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
Part Names and Functions
14
Base (without Slide Plate)
Name Function
A
Ceiling mount fixing
points
(four points)
Connect the ceiling mount fixing points to a commercially
available ceiling mount or wall mount when mounting the
projector to a ceiling or wall. For details, see the
documentation supplied with the the ceiling mount or
wall mount.
B
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
Control panel
Name Function
A
[t] button
Turns the projector power on or off.
s Quick Start Guide
B
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.94
C
[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.21
D
[Enter] button
If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
When the Configuration Menu or Help screen is
displayed, pressing this button confirms the current item
and moves to the next level. s p.73
Part Names and Functions
15
Name Function
E
[w][v] buttons
Corrects Keystone distortion. In the following cases,
however, these buttons function as the [
] and [ ]
buttons.
– When the projected image is being sent through a
Network connection
– When the Slideshow function is being used for
projection
If pressed when a Configuration Menu or Help screen is
displayed, these buttons selects menu items and setting
values.
s Quick Start Guide , p.73
F
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.93
G
[Esc] button
Stops the current function.
When the Configuration Menu is displayed, pressing this
button moves to the previous menu level. s p.73
H
[Wide][Tele] button
Adjusts Tele/Wide. Press the [Tele] button to reduce the
size of the projection screen and press the [Wide] button
to increase the size of the projection screen.
When the Configuration Menu or Help screen is
displayed, these buttons function as the [
][ ] buttons,
which select menu items and setting values.
s Quick Start Guide
I
[Menu] button
Displays and closes the Configuration Menu.
s p.73
Remote Control
Part Names and Functions
16
Name Function
A
[t] button
Turns the projector power on or off.
s Quick Start Guide
B
[Computer] button
Each time you press the button, input changes between
images from the Computer1 input port and the
Computer2 input port.
s
p.22
C
[Video] button
Each time you press the button, input changes between
images from the Video input port and the S-Video input
port. s p.22
D
Numeric buttons
Use when entering a password. s p.50
E
[A/V Mute] button
Turns the video and audio on or off. s p.40
F
[Freeze] button
Images are paused or unpaused. s p.41
G
[Auto] button
If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
H
[Aspect] button
The Aspect Ratio changes each time the button is pressed.
s p.41
I
[Page] buttons
([Up]) ([Down])
When you are using the Wireless Mouse function, USB
Display function, or the input source is projecting a file of
application software that supports page up/down via the
LAN, you can move the page up and down by pressing
these buttons. s p.48
J
[E-Zoom] buttons
(
z
)(
x
)
Enlarges or reduces the image without changing the
projection size. s p.47
K
[Menu] button
Displays and closes the Configuration Menu. s p.73
L
[ ][ ]
[
][ ] buttons
When the Configuration Menu or Help screen is
displayed, pressing these buttons selects menu items and
setting values. s p.73, p.93
During Wireless Mouse function, the mouse pointer
moves in the direction the button is pushed. s p.48
Name Function
M
[Enter] button
When the Configuration Menu or Help screen is
displayed, pressing this button confirms the current item
and moves to the next level.
s
p.73, p.93
Acts as a mouse's left button when using the Wireless
Mouse function. s p.48
N
[Esc] button
Stops the current function. If pressed when the
Configuration Menu is displayed, it moves to the previous
level.
s
p.73, p.93
Acts as a mouse's right button when using the Wireless
Mouse function. s p.48
O
[Volume] buttons (a)
(
b
)
(a) Decreases the Volume.
(b) Increases the Volume.
s Quick Start Guide
Caution
Do not start when the volume is set too high.
A sudden excessive volume may cause loss of hear‐
ing. Always lower the volume before turning the
power off, and gradually increase the volume after
turning the power on.
P
[Pointer] button
Press this button to activate the on-screen pointer.
s p.46
Q
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.93
R
[Color Mode] button
Each time the button is pressed, the Color Mode changes.
s p.39
S
[Num] button
Use when entering a Password. s p.50
Part Names and Functions
17
Name Function
T
[User] button
Select any frequently used item from the five available
Configuration Menu items, and assign it to this button. By
pressing the button the assigned menu item selection/
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments. s p.76
The menu Power Consumption is assigned as the default
setting.
U
[USB] button
Each time you press the button, input changes between
images from the equipment connected to USB Display
and USB(TypeA) port. s p.22
V
[LAN] button
Changes to the images projected with EasyMP Network
Projection. When you are projecting via Quick Wireless
Connection using the optional Quick Wireless
Connection USB Key, pressing this button changes to that
image. s p.22
W
[Search] button
Changes to the next input source that is connected to the
projector and is sending an image. s p.21
X
Remote control light-
emitting area
Outputs remote control signals.
Easy Interactive Pen(EB-460i/450Wi Only)
Name Function
A
Pen tip switch
Functions as the left button of a mouse.
B
Battery indicator
When you press the button, this indicator lights green if
there is any remaining battery power.
It does not light if there is not much remaining battery
power. If this happens, replace the batteries. s p.61
C
Button
Functions as the right button of a mouse.
D
Strap attachment hole
You can attach a commercially available strap.
E
Battery cover
Open this cover when replacing the batteries. s p.61
Part Names and Functions
18
Various Ways to Use the Projector
This chapter explains useful functions for giving presentations, connecting external equipment, and security functions.
The projector supports the following two different projection methods.
Install according to the conditions of the installation location.
Suspend the projector from the
ceiling and project images from
in front of the screen. (Front/
Ceiling projection)
Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
At the time of shipment, the projector is set to be installed suspended from
a ceiling and to project images from the front of the screen
(Front/Ceiling).
q
Set either Front/Ceiling or Rear/Ceiling setting from the
Configuration Menu. s p.78
Changing the Installation Mode
20
You can change the projected image in the following two ways.
Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
Changes to the target image.
You can use the Remote Control buttons to change to the target input
port.
Automatically Detect Input Signal and Change the
Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the [Source
Search] button.
A
Computer1
B
Computer2
C
S-Video
D
Video
E
USB Display
F
USB
*
: When the image is from a device connected to the USB(TypeA)
port.
G
LAN: When the projector is connected to a computer via a network,
and images from EasyMP Network Projection are projected.
Skipped when no image signal is being input.
*USB input source indicates that a Slideshow is being played back from a
USB storage device connected to the USB(TypeA) port, or that images are
being projected from the optional Document Camera.
Procedure
When your video equipment is connected, start playback before
beginning this operation.
Using the Remote Control Using the Control panel
When two or more pieces of equipment are connected, press the [Source
Search] button until the target image is projected.
Changing the Projected Image
21
q
The following screen showing the status of image signals is displayed
when only the image that the projector is currently displaying is
available, or when no image signal can be found. You can select the
input port where the equipment you want to use is connected. If no
operation is performed after about 10 seconds, the screen closes.
Switch to the target image by Remote Control
You can change directly to the target image by pressing the following
buttons on the Remote Control.
Remote Control
A
Each time you press the button, input changes between images from the
Computer1 input port and the Computer2 input port.
B
Each time you press the button, input changes between images from the
Video input port and the S-Video input port.
C
Each time you press the button, input changes between images from the
equipment connected to USB Display and USB(TypeA) port.
D
Changes to the images projected with EasyMP Network Projection. When
you are projecting via Quick Wireless Connection using the optional Quick
Wireless Connection USB Key, this button changes to that image.
Changing the Projected Image
22
You can use the supplied USB cable to connect the projector to a computer
to project images from the computer. This function is called USB Display.
Simply by connecting via a USB cable, images from the computer can be
displayed.
To activate the USB Display function, set USB Type B to USB Display from
the Extended menu in the Configuration Menu.
The following shows the default settings for USB Type B.
EB-460i/450Wi: Off
EB-460/450W/440W: USB Display
For EB-460i/450Wi, the setting needs to be changed in advance.
s p.78
System Requirements
For Windows
OS
Windows 2000 Service Pack 4
Windows XP
Windows XP Service Pack 2 or later
Windows Vista
Windows Vista Service Pack 1 or later
Windows 7
CPU
Mobile Pentium III 1.2GHz or faster
Recommended: Pentium M 1.6GHz or faster
Amount of
Memory
256MB or more
Recommended: 512MB or more
Hard Disk
Free Space
20MB or more
Display
Resolution of no lower than 640x480 and no higher than
1600x1200.
Display color of 16-bit color or greater
Only 32-bit versions are supported.
For Mac OS
OS
Mac OS X 10.5.1 or later
Mac OS X 10.6.x
CPU
Power PC G4 1GHz or faster
Recommended: Intel Core Duo 1.83GHz or faster
Amount of
Memory
512MB or more
Hard Disk
Free space
20MB or more
Display
Resolution of no lower than 640x480 and no higher than
1680x1200.
Display color of 16-bit color or greater
Connecting with a USB Cable and Projecting (USB Display)
23
Connecting
Procedure
A
Turn the computer on.
B
Connect to the power cable (supplied).
C
Turn the projector on.
D
Connect to the USB cable.
When outputting audio from the projector's speaker, connect
an audio cable (commercially available) to the Audio2 port.
s "Connecting for the first time" p.24
s "From the second time" p.27
Attention
Connect the projector directly to the computer and not via a USB hub.
Connecting for the first time
The first time you connect, the driver needs to be installed. The procedure
is different for Windows and Mac OS.
Procedure
For Windows
A
Driver installation starts automatically.
When you are using Windows 2000, double-click My Computer -
EPSON_PJ_UD - EMP_UDSE.exe on your computer.
Connecting with a USB Cable and Projecting (USB Display)
24
When using a computer running Windows 2000 under user
authority, a Windows error message is displayed during installation
and you may not be able to install the software. In this case, try
updating Windows to the latest version, restart, and then try to
connect again.
For more details, contact the nearest address provided in the Support
and Service Guide.
s Epson Projector Contact List
B
When the License Agreement screen is displayed, click
"Agree".
If the driver is not installed, you cannot start USB Display. Select
Agree to install the driver. If you want to cancel installation, click
Disagree.
C
Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
Connecting with a USB Cable and Projecting (USB Display)
25
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson eb 460i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson eb 460i in de taal/talen: Engels als bijlage per email.

De handleiding is 6,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Epson eb 460i

Epson eb 460i Gebruiksaanwijzing - Nederlands - 158 pagina's

Epson eb 460i Installatiehandleiding - English - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info