Related Information
& “Placing Originals” on page 49
& “Sending Fax Using the Control Panel” on page 116
& “Fax Settings” on page 128
Sending a Fax with a Selected Header
You can send a fax with sender information that is suitable for the recipient. You need to register multiple headers
of sender information in advance in the printer by following the steps below.
Registering Multiple Headers for Sending Faxes
You can register up to 21 fax headers as sender information.
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings.
3.
Tap Header, tap the Your Phone Number box, enter your phone number, and then tap OK.
4. Tap one of the boxes under the Fax Header list, enter the fax header information, and then tap OK.
Related Information
& “Fax Settings” on page 128
Sending a Fax with a Selected Header
When you send a fax, you can select header information for the recipient. To use this feature, you must register
multiple headers in advance.
1. Tap Fax on the home screen.
2.
Tap Fax Settings > Add Sender Information.
3. Select where you want to add your sender information.
❏ O: Sends a fax with no header information.
❏ Outside of Image: Sends a fax with header information in the top white margin of the fax. is keeps the
header from overlapping with the scanned image, however, the fax received by the recipient may be printed
across two sheets depending on the size of the originals.
❏ Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of the
scanned image. e header may overlap with the image, however, the fax received by the recipient will not
be split into two documents.
4. Tap the Fax Header box, and then select the header you want to use.
5. Tap one of the Additional Information options as necessary.
6. Tap OK to apply the settings.
User's Guide
Faxing
119
