617685
150
Verklein
Vergroot
Pagina terug
1/198
Pagina verder
Item Parameter Explanation
Warning Options
Off
Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the media rising during printing.
If On is selected, the printer will stop when the media rises to prevent a
head strike.
On is recommended if you will be performing other tasks and are unable
to give the printer your full attention during printing.
This may not be detected in the following instances even when On is
selected. Visually check that the media has not risen before you start
printing.
Set Media Size Check to Off.
Set Platen Gap to 2.5.
When printing patterns for Auto Media Adjust, Media Adjust (Feed
Adjustment, Head Alignment), and Nozzle Check (auto/manual).
When printing the job log, status sheets, and network settings.
When using transparent film or high-gloss media, media rise cannot be
detected even if this is set to On. If the media rubs against the print head
frequently, visually check the condition before you start printing.
On
Warning Level Options 1 to 5 The higher the value, the more sensitive the printer to media rise.
Choose lower values to reduce the number of stoppages.
Auto Nozzle Check
Nozzle Check Cycle
Off
Choose the frequency with which the printer performs an Auto Nozzle
Check: never (Off) or once every 1 to 10 pages. Auto Nozzle Check will
not be performed while Off is selected. If 1 to 10 is selected, the printer will
automatically checks for clogs at the specified intervals by scanning a test
pattern with a sensor as it is being printed.
Note that Auto Nozzle Check is not capable of detected all types of clog.
In addition, Auto Nozzle Check is not available depending on media
types or conditions.
U “Checking for clogged nozzles” on page 128
1 to 10 pages
Options When
Clogged
Continue Printing
Choose how the printer responds when Auto Nozzle Check detects
clogged nozzles.
If Continue Printing is selected, the printer will display Nozzle Clog
Detected but keep printing. Stop printing and perform head cleaning if
you judge it necessary on inspecting the print results.
U “Head Cleaning” on page 129
If Stop Printing is selected, the printer will display Nozzle Clog Detected
and pause printing. Inspect the print results and choose whether to
resume or suspend printing according to the extent of the clog.
Stop Printing
Print Nozzle Pattern
Off Choose the frequency with which the printer prints a nozzle test pattern:
never (Off) or once every 1 to 10 pages. Periodic test patterns will not be
printed while Off is selected. To print a test pattern at the top of every 1 to
10 pages, select an option between 1 and 10. When printing is complete,
you can visually inspect the pattern to determine whether there may be
faint or missing colors in the preceding or following printout.
1 to 10 pages
Periodical Cleaning
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Using the Control Panel Menu
150
150

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-S50600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-S50600 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installatiehandleiding - Nederlands - 56 pagina's

Epson SureColor SC-S50600 Gebruiksaanwijzing - Nederlands - 182 pagina's

Epson SureColor SC-S50600 Installatiehandleiding - Deutsch - 56 pagina's

Epson SureColor SC-S50600 Gebruiksaanwijzing - Deutsch - 217 pagina's

Epson SureColor SC-S50600 Installatiehandleiding - English, Français, Italiano, Português, Espanõl - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info