617685
147
Verklein
Vergroot
Pagina terug
1/198
Pagina verder
Item Parameter Explanation
Media Adjust
Select this option to adjust media with Auto Media Adjust disabled or
make readjustment when changing printing conditions after saving
media settings.
In this menu, perform Feed Adjustment and Head Alignment
individually.
Adjustment types and execution procedure U “Media Adjust” on
page 86
Feed Adjustment
Auto Print
Manual Print
Head Alignment
Standard
(Auto)
Print
Standard
(Manual)
Print
Block pattern Manual(Uni-D)
Manual(Bi-D)
Manual(Dual Head)
*1
Heating & Drying
Heater Tempera-
ture
Pre-heater/platen
heater: 30˚C to 50˚C
(86˚F to 122˚F)
After heater: 30˚C to
55˚C (86˚F to 131˚F)
The temperatures for the pre-, platen, and after heaters can each be
adjusted separately.
Drying Time Per
Pass
0 to 10 sec Select the time the print head pauses to allow drying after each pass.
Choose from values between 0.0 and 10.0 seconds. The time needed for
the ink to dry varies with ink density and the media used. If the ink blurs on
the media, set a longer time for drying the ink.
Increasing the drying time increases the time needed to print.
After Heater Feed Mode 1
To feed media to the after heater after printing, choose Mode 1 or Mode 2;
otherwise, choose Off.
If Mode 1 is selected, the portion fed for drying will not be rewound before
the next job starts. Select this option if the media will be cut before the next
job starts.
If Mode 2 is selected, the portion fed for drying will be rewound before the
next job starts, eliminating unnecessary margin. Select this option if
multiple jobs will be printed consecutively.
Mode 2
Off
Additional Dryer
On This item is displayed only when the additional print drying system
(supplied with the SC-S50600 series; optional with other models) is
installed.
Select On to enable, or Off to disable, the additional print drying system
(supplied with the SC-S50600 series; optional with other models). Note
that even when On is selected, the additional print drying system will turn
off with the heaters when the Heat Off Timer expires. The additional print
drying system will turn back on when the heaters resume operation. Heat
Off TimerU “The Printer Setup Menu” on page 149
Off
Advanced Settings During general use, use the default setting value without changing it.
When using special media or when a problem such as head striking or
banding is detected in printing results, change the default.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Using the Control Panel Menu
147
147

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-S50600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-S50600 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installatiehandleiding - Nederlands - 56 pagina's

Epson SureColor SC-S50600 Gebruiksaanwijzing - Nederlands - 182 pagina's

Epson SureColor SC-S50600 Installatiehandleiding - Deutsch - 56 pagina's

Epson SureColor SC-S50600 Gebruiksaanwijzing - Deutsch - 217 pagina's

Epson SureColor SC-S50600 Installatiehandleiding - English, Français, Italiano, Português, Espanõl - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info