Q Waste ink tube
Waste ink is discharged from this tube. Be sure the end of this tube is in the Waste Ink Bottle while the printer is in
use.
R Ink tank
Holds ink used for printing.
S Slider
U “Slider” on page 15
T Stirring stick
This is only for the High Density Black ink tank. Stir the ink in the ink tank once a week.
U Lock lever
Raise the lock lever to unlock the slider for removal when replacing the chip unit. Always lower the lock lever into
the locked position after inserting the slider.
V Chip unit check lamp
This lamp turns on when a message related to the chip unit is displayed.
On : Check the contents of the error on the control panel’s screen and deal with the error.
Off : No error.
W AC inlet #1/AC inlet #2
Connects the power cable. Be sure to connect both cables.
X LAN Port
U “LAN Port” on page 15
Y USB port
Connects the USB cable.
Z Maintenance cover (right)
Open this cover to perform maintenance around the print head. Normally closed when using the printer.
U “Cleaning” on page 78
a Media loading lever
After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media
prior to removal.
b Alert lamp
This lamp lights or flashes when an error occurs.
On/
Flashing
: An error occurred. The type of error is indicated by how the lamp lights or flashes. Check the contents
of the error on the control panel’s screen.
Off : No error.
c Control Panel
U “Control Panel” on page 19
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Introduction
10
