Conrm a
selection.
Go to next
screen.
Selects the
upper item.
Selects the
lower item.
Start
Split Time
Measures the elapsed time from the start.
Lap Time
Records the elapsed time for each lap .
Records laps while measuring.
Resets when recording has stopped.
Change between screens
Starts, stops, or resumes recording.
Measurement screen
Time screen
Set your Height ,
W eight, DOB,
Gender,
today's dat e,
and the
Date F ormat.
Displays the elapsed time (seconds).
Contact marks
When Complet e is
displayed , press
.
F unction of each but ton
This device has a Time screen, Measuremen t screen, Settings screen
(Settings menu and Measure set. menu), and History screen, and
you can perform operations with the following buttons .
Button
Opera tion
Time screen Measure ment screen Settings screen
Short press
- Changing between screen. Conrm a selection.
Long press*
1
T urns the power on or o .
Displays the time screen.
(Not available while
measuring.)
Fr om the Settings menu,
the time screen is displayed .
Fr om the Measure set.
menu, the measurement
screen is displayed .
Short press
T urns the light on or o. The light turns on for appr oximately 10 seconds.
Long press*
1
Displays the Settings
menu.
> Settings screen
Displays the Measure set .
menu.
(Not available while
measuring.)
-
Short press
Performs GPS positioning,
and displays the
Measurement screen.
Starts, stops, or resumes
measuring.
Selects the upper item.
Increases the value.
Long press*
1
Changes to indoor mode*
2
(GPS o ).
(SF-710/SF-510 only)
Displays the time screen.
(Not available while
measuring.)
Selects the upper item.
Speeds through the values.
Short press
Displays your w orkout
history.
Records laps while
measuring.
Selects the lower item.
Decreases the value.
Long press*
1
Sync to Bluetooth® device .
Use this when uploading
measurement data.
Resets*
3
while measuring is
stopped.
Selects the lower item.
Speeds through the values.
*1 : Hold down for at least two sec onds until the screen changes.
*2 : GPS data is not recor ded in indoor mode.
*3 : When you reset the display , it returns to the status bef ore measuring star ted allowing you t o
start the nex t measurement. Data that has been measur ed up to that point is stored in the device's
memory.
If no operations are performed after three minutes when the System settings , User settings, or
Histor y screens are displa yed, you are r eturned to the time screen.
Measuring F unc tion for the D evic e
This device receiv es a signal via GPS, and measures distance and pace. T o make sure measurements
are performed accurately , try to use the device under the following conditions which allow f or easy
reception of GPS signals .
Locations wher e you cannot receiv e signals
Inside rooms
or buildings, or
underground
In tunnels Underwater
Locations that ar e dicult to receive sig nals
Locations with electronic
interference, such as
constructions sites and
heavy trac
Near high-voltage wires
or television towers ,
overhead electric wires
for trains, and r oads with
skyscrapers
In water
1. Go to a location out side with no obs tructions overhead, the n Press .
GPS posit ioning s tar ts , tr y to keep the d evice as still as p ossible. W hen compl ete, the scre en
ashes, an d then the m easurement s creen is disp layed.
It usuall y takes less than t wo minutes to complete GPS po sitioning.
If it takes more than t wo minutes or Faile d is displa yed, we recommend sel ecting
Cancel, moving to a diere nt location, an d tr ying again.
When the measurement scr een is displayed, you can start measuring. "6. Measuring Time,
Distance, and Speed (Chr onograph Function)"
When using the d evice for the rst time or wh en the device has not be en used fo r
several months, connect to the G PS net work for at least 1 5 minutes with no
obstructio ns overhead. This a llows the device to calibrate for more p recise
measurements.
Thank you very much for purchasing a RUNSENSE pr oduct. Please read this guide carefully to
use this product. A RUNSENSE SF-710 is used for illustration purposes . Screen layout and menus
are common across the r ange. See the User Manual for more detailed descriptions, which y ou
can download from the f ollowing address.
w w w .epson.eu/runsense
• Unapproved c opying of par t or all of this guide is strictly forbidden.
• The content of this guide is subject to change without prior notice .
Contact your reseller if ther e are any missing or damaged components.
An optional AC adapter and heart rate monitor chest
strap can be purchased separat ely.
Main unit
What’ s in the box
Cradle Quick Start Guide
(this document)
Information
Sheet
1. Connect th e cradle using one of the f ollowing metho ds.
» Using a PC
Connec t th e cradle ’ s USB pl ug to the comp uter ’s USB port .
This is not guar anteed to wor k with all compu ters. D o not use a USB hub. Instead , connec t the
cradle di rec tly to the computer .
» Using the AC adap ter
Connec t th e cradle ’ s USB pl ug to the AC adapte r ’ s USB po r t.
We recommend using t he optio nal AC adapter (Model N o.: SF AC 02 Conti / SF AC03 UK). If you
do not use a sup por te d AC adapter , you may not be ab le to charge or it may not o perate
correctly .
2. Place the device in to the cradle.
Check that th e contac t point s on the dev ice are pointin g up and match the contac t mar k s on
the cradle . Af ter placin g the devi ce into the bot tom of the cradle , push c arefull y on the top of
the devi ce until it is xed in place.
When th e device is pla ced correc tl y , the alar m sounds , the charging s creen is disp layed, and
charging star t s.
3. When charging is c omplete, remov e the device from the cradle .
When th e followin g charging icon is disp layed, charging is comp lete. Hol d the cradle and
press the d evice down into the lower p ar t of the cradle to releas e the pro duc t.
4. F ollow the on-screen instructions to set the Language, Units , and user informa tion.
5. When you ar e in a location with no obstructions overhead, select Ye s .
A signal is recei ved from th e GPS and tim e is automaticall y syn chronise d.
When you leave the device for a whi le, it ente rs sleep status an d the time displa y turns
o. This is not a malfu nction a s the display i s restored the ne x t time you move the
device. If time sy nchronisation fails , continue to the ne x t step. The time screen w ill
automatically b e update d the nex t time a G PS signal has b een received.
Charge this device befo re using it for the rst time.
3. Basic Operations
4. GPS Positioning
What is the Chronogr aph func tion ?
This function allows you to measur e split times and lap times simultaneously.
Y ou can record the laps by pr essing button
on the device during Chronograph measur ement, or by
using the A T lap function.
Measuring
1. Press to st art m easuring.
2. T o recor d a lap, press while measuring .
3. Press again t o stop recording .
4. Press and hold f or a few seconds when you ha ve nished recor ding to reset the
measurement display .
• The Chronograph scr een is composed of four screens, and you can change the scr een display by pressing
. Y ou can change the content displayed on screens 1 to 4 b y changing Measure set. > Screen . F or more
details, see the User Manual.
• After resetting, pr ess and hold or for a few seconds to return to the time scr een.
• If no operations are made for 60 minutes on a scr een other than the measuring screen, the time screen is
displayed.
• As well as the Chronogr aph func tion, there are a variety of other measurement functions. Please see full
User Manual for details.
Recall Data (Histor y F unc tion)
1. Press on th e time screen . The recall s creen is displ ay e d.
2. Use / to select the data you w ant to check, and then press .
3. T o check the recor ded data use / to scroll through the screen.
Det ailed re corded r esults fo r the ac tivit y t y pe, re corded day/ st ar t time, time, dis tance, and
calor ies burn ed are disp layed on the de taile d recall s creen . Y ou can also ch eck the p ace for
each lap.
Press
to return to the re call scr een. H old dow n to return to the tim e scree n.
Understanding the I cons
Run mode Split time
W alking mode A verage pace
Bike mode Calories burned
Stops ashing : The signal is being receiv ed from the GPS
(GPS On)
Stride
GPS positioning Lap
Stops ashing : Communicating with the HR monitor Editable data
Distance Current settings
6. Measuring Time, D istance, and Spee d (Chronograph F u nct ion )
Lap Num ber (No. )
Number of laps
Lap Distance (LapDis t.)
Distance of each lap
Lap Time (Lap )
Time taken for each lap
Quick Star t Guide
Make sure you read the manuals ( Quick Star t Guide and User Manual) rst to use this product safely .
Also, this devic e is equipped with Bluetooth® Smar t technology as a built-in wireless function. See the
section "Notes on Electromagnetic Wav es" in the User Manual for fur ther details.
The product may malfunction, or an accident may occur if it is handled incorr ec tly .
• Keep the manuals handy to help you resolv e any problems.
• When taking this product out of the countr y of purchase, check the la ws and regulations in the
destination country before you tra vel.
• This product is not a medical device. Use this pr oduct as an indicator during physical exercise .
Safet y Instruc tions
The following symbols ar e used in this guide to indicate possible dangerous operations or handling .
Make sure you understand these warnings befor e using the product.
W arning
This symbol indicates information tha t, if ignored, could possibly result in
serious personal injury.
Caution
This symbol indicates information tha t, if ignored, could possibly result in
personal injury or damage the product.
This symbol indicates an action that should be done.
This symbol indicates an action that must not be done.
Notes on Using the Produc t and Components
W arning
Exercise acc ording to your physical capabilities .
Stop exer cising and consult your doctor if you feel unw ell during exercise.
Do not use or store this product in the following en vironments. It may cause an electric shock or
re, or the pr oduc t may malfunction or be damaged.
•Locations with very high or low temperatur es or humidity
•Near volatile substances
•Dusty places
•Near a strong magnetic eld (for e xample, near a loudspeaker)
Do not disassemble this product, and do not attempt to repair this pr oduc t by yourself . It may
cause an electric shock or accident.
Do not leave this product within reach of young childr en.
Caution
Stop using the device immediately and consult y our doctor if you have an allergic reaction or a
rash while or during use.
The device is water r esistant at 5 bar (5 A TM). Although you can use the device for swimming and
so on, do not perform button operations under water .
Do not pour water directly from the tap onto this pr oduct. The pow er of the tap water stream may
be strong enough to compr omise the product ’ s waterproof f eature.
Do not wear this product in a bath or sauna. The steam and soap may compromise the w aterproof
feature or cause c orrosion.
Notes on Using the Cradle
W arning
Do not use the cradle or AC adapter if they ar e in any way damaged, faulty or contaminated
by foreig n material such as dust, water or dirt. Do not use any adapter other than the specied
adapter for charg ing.
1 . For Y our Safet y
5. F or more ac curat e Measurements
GPS Sports Monitor
2. Charging and Initial Set tings
©2014 Seiko Epson Corporation.
All rights reserved.
Printed in Japan
Before G et ting Star ted
MEMO