771289
27
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
Connecting to Wi-Fi or Ethernet
Cannot connect to network
Is the message “The combination of IP address and subnet mask is invalid.” displayed?
Solution 1: If your broadband router (or access point) uses a DHCP function, set the TCP/IP setting so that the
product acquires an IP address automatically.
Solution 2: If you want to set the product’s IP address manually, see the following to set the IP address and subnet
mask.
1. Check the IP address for the broadband router (or access point) connected to your computer. See the broadband
router’s (or access point’s) user’s guide.
2. All IP addresses are written in segments of four numerical values. In the final segment, set a unique numerical
value for your product within a range of 1 to 254. (When the router is a DHCP server or when there is another
DHCP server in the network, set a value that does not conflict with the ID address range allocated by the DHCP
server.)
Setting example:
IP address for the broadband router: 192.168.1.1
Example setting on the product: 192.168.1.3
For the subnet mask, 255.255.255.0 is normally set for small-scale networks and all devices in the network use this
value. Also, when a gateway value is set, use the same value as the IP address for the wireless router.
Does your computer have more than one network interface?
The scanner may not be able to communicate with computers that have multiple network interfaces. To
communicate with the scanner, disable all network interfaces on your computer except for the interface
connected to the scanner.
When using TCP/IP, can the computer and product communicate?
Verify that a connection is established. See “Ping command” on page 23.
When using TCP/IP, is the IP address set correctly for your environment?
The factory setting is not available as is. To use this IP address, delete it once and reenter the same address. Change
the product’s IP address as appropriate for your environment.
The IP address changes
Is the TCP/IP setting on the control panel set to acquire an IP address automatically?
If the setting is auto, the IP address changes each time the router is turned on. When using the auto setting,
determine the power-on order, or always keep the product turned on. The auto setting is available when setting the
product port using EpsonNet Print (in Windows) or Bonjour printing (in Mac OS X).
Printing Problems
Computer Connected to Wi-Fi
Cannot perform network printing
Are the network connection settings correct?
See “Setup Problems” on page 24 for more details on problems with network connection settings.
Network Guide
Troubleshooting
27
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson Guide Reseau bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson Guide Reseau in de taal/talen: Engels als bijlage per email.

De handleiding is 0.41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson Guide Reseau

Epson Guide Reseau Gebruiksaanwijzing - Nederlands - 37 pagina's

Epson Guide Reseau Gebruiksaanwijzing - Deutsch - 37 pagina's

Epson Guide Reseau Gebruiksaanwijzing - Français - 37 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info