36096
5
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
iii
English
Enlarge Reduce
Normal
Wide Top
Wide Base
Extend Retract
Rear Adjustable
Foot
* If you turn the power on straight after turning it off, the time before projection starts becomes longer than usual.
* For video equipment,
press "play" to start
playback.
Control Panel Remote Control
Power Indicator
Lit
Flashing
Orange
Standby
Press
to start
projecting.
Green
Green
Warming up
Wait for a short
time (about 30
seconds).
Projecting
In this mode, you can unplug
the power cable.
Reading the Indicators
In this mode pressing
has
no effect.
(Accessory
Power Cable)
Examples
NEC
Panasonic
SOTEC
HP
TOSHIBA
IBM
SONY
DELL
FUJITSU
Macintosh
Set mirror setting
or display
detection.
Depending on
your OS, you can
select them by
pressing .
Turning on and Projecting
When using the "Direct
Power On" feature, the
power turns on when the
power cable is connected.
When using above an
altitude of about 1500 m,
make sure you set the High
Altitude Mode to On.
User’s Guide "Extended
Menu"
No image is projected
For notebooks and computers with liquid
crystal displays
Change the computers
output source. Hold
down the
key and
press the appropriate
key (the one usually
labelled
/ ). After
changing the setting,
wait a few seconds for
projection to start.
Computer’s "User’s
Guide"
* If the image is not
projected, press
.
For video equipment
Start playback then
press
.
Adjusting Position and Focus
(Setting up for the first time or after moving)
Raising the Projection Position (Adjusting the front foot)
When moving the projector, make sure
the front foot is retracted.
You can adjust the front foot to raise the
projection angle up to a maximum of 10°.
Correcting Keystone Distortion
You can adjust the vertical tilt to a maximum of
about 30°*.
* The greater the angle of tilt, the harder the
image is to focus. Setup the projector at a lower
angle of tilt.
When the "Auto Keystone" function
is turned "Off" in the configuration
menu, automatic keystone
correction is not performed.
(EMP-82/62 only)
You can also make keystone
corrections from the configuration
menu.
User’s Guide "Settings Menu"
Hold down
and press for
more than one second to reset the
correction value to the default
setting.
Adjust the horizontal tilt by turning
the left rear foot.
Adjusting Focus
After keystone correction and
sharpness adjustments, the image
may be unfocused.
Adjusting Projection Size
Turning the Projector off
Turn off all connected equipment.
Press twice on the remote
control or control panel.
After the confirmation buzzer beeps
twice, unplug the power cable.
Electricity is consumed if only the projector's
power is turned off.
Attach the lens cover.
Foot Adjust
Lever
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson EMP-82 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson EMP-82 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson EMP-82

Epson EMP-82 Gebruiksaanwijzing - Nederlands - 81 pagina's

Epson EMP-82 Gebruiksaanwijzing - Deutsch - 87 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info