• Arc Correction
Fine adjustment of the curved distortion caused by slack or shrinkage of
the screen.
s "Arc Correction" p.143
• Point Correction
Corrects slight distortion which occurs partially, or adjusts the screen
position in an overlapping area when projecting from multiple
projectors.
s "Point Correction" p.153
Quick Corner, H/V-Keystone, Arc Correction, and Point Correction cannot
be performed at the same time. Select the correction method from
Geometric Correction in the configuration menu. The default setting for
Geometric Correction is set to H/V-Keystone, so when [
w/ ], [v/ ],
[
</ ], and [>/ ] buttons are pressed, H/V-Keystone correction is carried
out.
Because Quick Corner, H/V-Keystone, Arc Correction, and Point
Correction can be carried out while projecting a test pattern, you do not
need to make preparations by connecting a computer or other equipment.
Quick Corner
Procedure
A
During projection, press the [Menu] button. Select Settings
menu - "Geometric Correction" and then press the [Enter]
button.
s
"Using the Configuration Menu" p.47
Using the Remote Control Using the Control Panel
B
Select "Quick Corner", and then press the [Enter] button.
Press the [Enter] button again to display the selection screen from
which you can select one of the four corners.
Adjusting the Projected Image
140
