617832
119
Verklein
Vergroot
Pagina terug
1/166
Pagina verder
119
Copy Menu Settings to Another Projector (Batch Setup)
projector's indicators have turned off.
After selecting the projector's menu settings for one projector, you can save
b
Connect an empty USB flash drive directly to the projector's USB-A
the settings to a USB flash drive or a computer connected with a USB cable to port.
copy settings to another projector, as long as they are the same model.
c
Hold down the [Esc] button on the remote control or the control panel
Menu settings such as the following are not copied to the other projector.
and connect the power cord to the projector.
Network menu settings (except for the Mail menu and the Others menu)
Lamp Hours and Status from the Info menu
d
When all of the projector's indicators turn on, release the [Esc] button.
The indicators start flashing and the batch setup file is written to the
Perform batch setup before adjusting the image settings such as
USB flash drive. When writing is finished, the projector turns off.
Keystone. Since image adjustment values are also copied to another
a
projector, the adjustments you made before performing the batch setup
Caution
are overwritten and the projected screen you adjusted may change.
Do not disconnect the power cord or the USB flash drive from the projector
When copying the menu settings from one projector to another, user's
while the file is being written. If the power cord or USB flash drive is
logo is also copied. Do not register the information that you do not
disconnected, the projector may not start correctly.
want to share between multiple projector as a user's logo.
e
Remove the USB flash drive.
Caution
Epson takes no responsibility for batch setup failures and associated repair costs
The file name for the batch setup file is PJCONFDATA.bin. If
due to power outages, communication errors, or other problems that may cause
you need to change the file name, add text after PJCONFDATA
a
such failures.
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
gg Related Links
able to recognize the file correctly.
• "Performing Batch Setup Using a USB Flash Drive" p.119
• "Performing Batch Setup Using a USB Cable" p.120
f
Disconnect the power cord from the projector to which you want to
copy settings, and check that all of the projector's indicators have
Performing Batch Setup Using a USB Flash Drive
turned off.
You can copy menu settings from one projector to another of the same model
g
Connect the USB flash drive containing the saved batch setup file to the
using a USB flash drive.
projector's USB-A port.
The USB flash drive must use a FAT format and not incorporate any
h
Hold down the [Menu] button on the remote control or the control
security function. Delete any files on the drive before using it for batch
a
panel and connect the power cord to the projector.
setup or the settings may not be saved correctly.
i
When all of the projector's indicators turn on, release the [Menu]
button. (The indicators remain on for approximately 75 seconds.)
a
Disconnect the power cord from the projector, and check that all of the
119

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson EB-S300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson EB-S300 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson EB-S300

Epson EB-S300 Gebruiksaanwijzing - Nederlands - 169 pagina's

Epson EB-S300 Gebruiksaanwijzing - Deutsch - 169 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info