This chapter explains the projector's features and the part names.
Quick and Easy Set up, Projection, and Storage
•Turn the projector on and off by simply plugging in or unplugging.
•Project onto large screens from a short distance.
•Make easy height adjustments with one lever.
•No cool down delay makes it easy to put away.
Connecting with a USB cable and projecting (USB Display)
By simply connecting a USB cable, you can
project images from a computer's screen
without a computer cable.
s "Projecting with USB Display" p.32
Detecting projector movements and automatically correcting
image distortion
This projector automatically corrects vertical keystone distortion which
occurs when positioning or moving the projector.
s
"Correcting automatically"p.36
Horizontal keystone adjuster
This allows you to quickly correct horizontal distortion in the projected
image. This is useful if you cannot install the projector parallel to the
screen.
s "Correcting manually"p.37
Useful Functions for Projecting Images
Project two images simultaneously (Split Screen)
This function divides the projected screen in
two and projects two types of image side-by-
side. By simultaneously projecting images from
two sources on one screen, you can raise the
impact of your message or proposition during
video conferences or presentations.
s "Projecting Two Images Simultaneously
(Split Screen) " p.49
Projector Features
8
Increasing projection content in wide (WXGA) screen (EB-1940W
only)
With a computer that has a 16:10 WXGA wide
LCD display, the image can be projected in the
same aspect. You can use whiteboards and other
landscape format screens.
s "Changing the Aspect Ratio of the Projected
Image " p.44
Making the most of the remote control
You can use the remote control to perform operations such as enlarging
part of the image. You can also use the remote control as a pointer during
presentations or as a mouse for the computer.
s "Pointer Function (Pointer)"p.62
s "Enlarging Part of the Image (E-Zoom)"p.63
s "Using the Remote Control to Operate the Mouse Pointer (Wireless
Mouse)"p.64
Enlarge and project your files with the Document Camera
You can project paper documents and objects using the optional Document
Camera. Image focus is automatically adjusted using the auto focus
function. You can also enlarge images using digital zoom.
s "Optional Accessories"p.128
Connect a USB storage device and project PDFs, movies, and
images (Slideshow)
You can connect USB storage devices or digital cameras to the projector
and project saved images.
A wide range of file formats are supported such as PDF, movie, and image
files.
s "Projecting Without a Computer (Slideshow)"p.53
Enhanced security functions
•Password Protect to restrict and manage users
By setting a Password you can restrict who can use the projector.
s "Managing Users (Password Protect)"p.70
•Control Panel Lock to restrict button operation on the control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on.
s
"Restricting Operation (Control Panel Lock)"p.72
•Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft security
devices.
•Security slot
•Security cable installation point
s
"Anti-Theft Lock" p.73
Optimum color mode for projecting medical images
A color mode called DICOM SIM is provided to project medical images,
such as X-ray photographs. Thismode produces image quality that
approaches the DICOM standard.
(The projector is not a medical device and cannot be used for medical
diagnosis.)
Projector Features
9
s "Selecting the Projection Quality (Selecting Color Mode)"p.43
Precise color adjustments
You can adjust the image's absolutecolor temperature and the strength of
each RGB color. You can also adjust the hue, saturation, and brightness of
each RGBCMY to obtain color matching in superior detail.
s
"Adjusting the Image"p.41
Taking Full Advantage of a Network Connection
Connecting to a network and projecting images from the
computer's screen
You can connect the projector to a computer on
a network and project the computer's screen
using the supplied EasyMP Network Projection
(application software).
sEasyMP Network Projection Operation
Guide
Projecting images from portable devices over a network
If "Epson iProjection" is installed on your smart
phone or tablet device, you can wirelessly
project data from the device. Because you can
operate these devices from any location, you can
vary the way in which conferences or
presentations are made.
You can download "Epson iProjection" for free from the App Store. Any
fees incurred when communicating with the App Store are the
responsibility of the customer.
Easy connection to a computer with Quick Wireless Connection
By simply connecting the optional Quick
Wireless Connection USB Key to a computer,
you can project the computer's screen. (Only for
Windows computers that support wireless
LAN)
Projector Features
10
Front/Top
NameFunction
A
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
B
Remote receiver
Receives signals from the remote control.
C
A/V mute slide knob
Slide the knob to open and close the A/V mute slide.
D
Foot adjust lever
Press the foot adjust lever to extend and retract the front
adjustable foot.
s "Adjusting the Image Position" p.40
NameFunction
E
Front adjustable foot
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position" p.40
F
A/V mute slide
Close when not using the projector to protect the lens. By
closing during projection you can hide the image and the
sound.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.61
G
Focus ring
Adjusts the image focus.
s "Correcting the Focus" p.41
H
Zoom ring
Adjusts the image size.
s "Adjusting the Image Size" p.40
I
Air intake vent
(air filter)
Takes in air to cool the projector internally.
s "Cleaning the Air Filter" p.119
J
Air filter cover
operation knob
Use this knob to open the air filter cover.
s "Replacing the Air Filter" p.125
K
H-Keystone Slider
Corrects horizontal distortion in the projected image.
s "Correcting manually" p.37
L
Control panel
Operates the projector.
s "Control Panel" p.14
M
Lamp cover
Open when replacing the projector's lamp.
s "Replacing the Lamp" p.121
Part Names and Functions
11
Rear
NameFunction
A
DisplayPort
Inputs video signals from DisplayPort compatible
computers. This projector is compatible with
HDCP
g
.
B
Computer1 port
Inputs image signals from a computer and component
video signals from other video sources.
C
Monitor Out port
Outputs analog RGB signals input from the Computer1
port to an external monitor. You cannot output signals
input from other ports or component video signals.
D
Audio1 port
Inputs audio from equipment connected to the
Computer1 port.
E
Audio Out port
Outputs audio from the currently projected image to an
external speaker.
F
Audio-L/R port
Inputs audio from equipment connected to the Video
port.
G
Audio2 port
Inputs audio from equipment connected to the
Computer2 port.
H
Power inlet
Connects the power cord to the projector.
s "From Installation to Projection" p.30
NameFunction
I
RS-232C port
When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands" p.78
J
LAN port
Connects a LAN cable to connect to a network.
K
Remote receiver
Receives signals from the remote control.
L
Security slot
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Anti-Theft Lock" p.73
M
USB(TypeA) port
•Connects a USB memory device or a digital camera and
projects PDFs, movies, or images using Slideshow.
s "Projecting Without a Computer (Slideshow)"
p.53
•Connects the optional Document Camera.
N
USB(TypeB) port
•Connects the projector to a computer via a
commercially available USB cable, and projects the
images on the computer.
s "Projecting with USB Display"p.32
•Connects the projector to a computer via the
commercially available USB cable to use the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
O
Computer2 port
Inputs image signals from a computer and component
video signals from other video sources.
P
Video port
Inputs composite video signals from video sources.
Q
HDMI port
Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with
HDCP
g
.
s "Connecting Equipment" p.23
Part Names and Functions
12
Base
NameFunction
A
Ceiling mount fixing
points (three points)
Attach the optional Ceiling Mount here when suspending
the projector from a ceiling.
s "Installing the Projector" p.20
s "Optional Accessories" p.128
B
Rear feet
When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.
s "Adjusting the Horizontal Tilt" p.40
NameFunction
C
Front adjustable foot
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position" p.40
D
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
s "Installing the wire lock" p.73
Part Names and Functions
13
Control Panel
NameFunction
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
C
[Enter] button
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
D
[w][v] buttons
•Displays the Keystone screen allowing you to correct
Keystone distortion in vertical and horizontal
directions.
s "Correcting manually" p.37
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu"p.85
s "Using the Help" p.102
NameFunction
E
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.102
F
[Esc] button
•Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu" p.85
G
[a][b] buttons
•Adjusts the speaker volume.
[b] Increases the volume.
[
a
] Decreases the volume.
s "Adjusting the Volume" p.41
•Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s "H/V-Keystone" p.37
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.85
s "Using the Help" p.102
H
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.85
I
Indicators
Indicates the projector's status.
s "Reading the Indicators" p.104
Part Names and Functions
14
Remote Control
NameFunction
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Computer] button
Each time you press the button, the image displayed
changes between the Computer1, Computer2, and the
DisplayPort ports.
C
[Video] button
Each time the button is pressed, the image displayed
changes between the Video input port and HDMI input
port.
D
Numeric buttons
•Enter the Password.
s "Setting Password Protect" p.70
•Use this button to enter numbers in Network settings
from the Configuration menu.
•The screen fit function is unavailable.
E
[Auto] button
If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize Tracking,
Sync., and Position.
F
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image "
p.44
G
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protect" p.70
H
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.85
I
[][][][]
buttons
•When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu"p.85
•During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
Part Names and Functions
15
NameFunction
J
[] button
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu" p.85
•Acts as a mouse's left button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
K
[User] button
Select any frequently used item from the six available
Configuration menu items, and assign it to this button. By
pressing the [User] button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s "Settings Menu" p.90
Power Consumption is assigned as the default setting.
L
[Page] buttons
[
[
][
]
]
Changes pages in files such as PowerPoint files when using
the following projection methods.
•When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
•When using USB Display
s "Projecting with USB Display" p.32
•When connecting to a network
When projecting images using Slideshow, pressing these
buttons displays the previous/next screen.
M
[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
s "Enlarging Part of the Image (E-Zoom)" p.63
NameFunction
N
[A/V Mute] button
•Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.61
•You can change the Projection mode as follows by
pressing the button for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
O
[Split] button
Each time the button is pressed, the image changes
between projecting two images simultaneously by
splitting the projected screen, or projecting one image as
normal.
s "Projecting Two Images Simultaneously (Split Screen)
" p.49
P
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.102
Q
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.61
R
[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s
"Adjusting the Volume" p.41
S
[Pointer] button
Displays the on-screen pointer.
s "Pointer Function (Pointer)" p.62
T
[Esc] button
•Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu"p.85
•Acts as a mouse's right button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
Part Names and Functions
16
NameFunction
U
[ID] button
Hold down this button and press the numeric buttons to
select the ID for the projector you want to operate using
the remote control.
s "Setting an ID and using the remote control" p.65
V
[Color Mode] button
Each time the button is pressed, the Color Mode changes.
s "Selecting the Projection Quality (Selecting Color
Mode)" p.43
W
[LAN] button
Switches to the image from the network connected device.
X
[USB] button
Each time the button is pressed, the image displayed
changes between the following sources.
•USB Display
•Images from the device connected to the USB(TypeA)
port
Y
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
Z
Remote control light-
emitting area
Outputs remote control signals.
Replacing the remote control batteries
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size manganese or alkaline batteries ready. You
cannot use other batteries except for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
sSafety Instructions
a
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
b
Replace the old batteries with new batteries.
Part Names and Functions
17
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
Replace the battery cover.
Press the battery compartment cover until it clicks into place.
Remote control operating range
88
88
Part Names and Functions
18
Preparing the Projector
This chapter explains how to install the projector and connect projection sources.
Installation Methods
The projector supports the following four different projection methods.
Install the projector according to the conditions of the installation location.
•Project images from in front of
the screen. (Front projection)
•Project images from behind a
translucent screen. (Rear projec‐
tion)
•Suspend the projector from the
ceiling and project images from
in front of a screen. (Front/Ceil‐
ing projection)
•Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
Warning
•A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If it is not installed correctly, it could fall
causing an accident and injury.
•If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause serious injury to anyone under the ceiling mount
and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or lubricants and so
on.
•Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
Attention
Do not use the projector on its side. This may cause malfunctions to occur.
a
•An optional Ceiling mount is required when suspending the
projector from a ceiling.
s "Optional Accessories"p.128
•The default Projection setting isFront. You can change from Front
toRear from the Configuration menu.
sExtended - Projectionp.91
•You can change the Projection mode as follows by pressing down
the [A/V Mute] button on the remote control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
Installation methods
Install the projector as follows.
Installing the Projector
20
•Install the projector so that it is parallel to the screen.
If the projector is installed at an angle to the screen, keystone distortion
occurs in the projected image.
•Place the projector on a level surface.
If the projector is tilted the projected image is also tilted.
a
•See the following if you cannot install the projector parallel to the
screen.
s "Correcting Keystone Distortion"p.36
•See the following if you cannot install the projector on a level
surface.
s "Adjusting the Horizontal Tilt"p.40
s "Correcting Keystone Distortion"p.36
Screen Size and Approximate Projection Distance
Projection size is determined by the distance from the projector to the
screen. See the illustrations on the right to select the best position according
to the screen size. The illustrations show the approximate shortest distance
at maximum zoom. See the following for more information on the
projection distance.
s
"Screen Size and Projection Distance"p.130
a
When you correct keystone distortion, the projected image may be
reduced.
16:10 Screen Size
For EB-1940W
(110×67cm)
(170×110cm)
(220×130cm)
(320×200cm)
50”
80”
100”
150”
Installing the Projector
21
4:3 Screen Size
For EB-1960/EB-1950/EB-1930
Installing the Projector
22
The port name, location, and connector orientation differ depending on the source being connected.
Connecting a Computer
To project images from a computer, connect thecomputer using one of the following methods.
A
When using the supplied computer cable
Connect the computer's display output port to the projector's Computer port.
You can output audio from the projector's speaker by connecting the audio output port on the computer to the projector's Audio1 or Audio2 port using a commercially available audio
cable.
B
When using a commercially available USB cable
Connect the computer's USB port to the projector's USB(TypeB) port.
You can send the computer's audio with the projected image.
C
When using a commercially available HDMI cable
Connect the computer's HDMI port to the projector's HDMI port.
You can send the computer's audio with the projected image.
D
When using a commercially available DisplayPort cable
Connect the computer's DisplayPort to the projector's DisplayPort.
You can send the computer's audio with the projected image.
Connecting Equipment
23
4
DisplayPort
4
a
•You can use a USB cable to connect the projector to a computer to project images from the computer. This function is called USB Display.
s "Projecting with USB Display"p.32
•Some commercially available DisplayPort cables come with a lock. When removing the cable, press the button on the cable's connector section and pull out the
cable.
Connecting Image Sources
To project images from DVD players or VHS video and so on,connect to the projector using one of the following methods.
A
When using a commercially available video cable
Connect the video output port on the image source to the projector's Video port.
You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio-L/R port using a commercially available audio
cable.
B
When using the optional component video cable
s "Optional Accessories" p.128
Connect the component output port on the image source to the projector's Computer input port.
You can output audio from the projector's speaker by connecting the audio output port on the video equipment to the projector's Audio1 or Audio2 port using a commercially available
audio cable.
Connecting Equipment
24
C
When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI port.
You can send the image source's audio with the projected image.
Attention
•If the input source is on when you connect it to the projector, it could cause a malfunction.
•If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a
•If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.
•When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
Connecting USB Devices
You can connect devices such as the optional Document Camera,a USB memory, and USB compatible hard disks and digital cameras.
Connecting Equipment
25
Using the USB cable supplied with the USB device, connect the USB device to the USB(TypeA) port on the projector.
When the USB device is connected, you can project fileson the USB memory or digital camera using Slideshow.
s "Slideshow examples"p.53
Attention
•If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly.
•When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk.
•Connect a digital camera or hard disk to the projector using a USB cable supplied with or specified for use with the device.
•Use a USB cable less than 3 m in length. If the cable exceeds 3 m, Slideshow may not function correctly.
Removing USB devices
After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from
the projector.
Connecting Equipment
26
Connecting External Equipment
You can output images and audio by connecting an external monitor or speaker.
A
When outputting images to an external monitor
Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.
B
When outputting audio to an external speaker
Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
a
•If you setStandby Mode toCommunication On, you can output images to an external monitor even if the projector is in standby mode.
sExtended - Standby Modep.91
•Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video
signals.
•Setting gauges for functions such as Keystone, Configuration Menu, or Help screens are not output to the external monitor.
•When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakersand switches to external
output.
Connecting Equipment
27
Connecting a LAN Cable
Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
By connecting a computer to the projector over a network, you can project images and check the status of the projector.
a
To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Connecting Equipment
28
Basic Usage
This chapter explains how to project and adjust images.
From Installation to Projection
This section explains the procedure for connecting the projector to a
computer with the computer cable and projecting images.
ON
a
Connect the projector to an electrical outlet with the power cord.
b
Connect the projector to the computer with the computer cable.
c
Turn on the projector.
d
Open the A/V mute slide.
e
Turn on your computer.
f
Change the computer's screen output.
When using a laptop computer,you need to change the screen
output from the computer.
Hold down the Fn key (function key), and press the b key.
a
•The method for changing differs depending on the computer
being used. See the documentation supplied with the
computer.
•When turning off the projector, press the [t] button twice.
If the image is not projected, you can change the projected image using one
of the following methods.
•Press the [Source Search] button on the control panel or the remote
control.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)"p.31
•Press the button for the target port on the remote control.
s
"Switching to the Target Image by Remote Control"p.32
a
After projecting the image, adjust the image if necessary.
s "Correcting Keystone Distortion"p.36
s "Correcting the Focus"p.41
Projecting Images
30
Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using the remote controlUsing the control panel
DisplayPort
HDMIUSBLANUSB Display
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Projecting Images
31
Switching to the Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the remote control.
Remote control
A
Each time the button is pressed, it cycles through the images being input
from the following sources.
•Computer1 port
•Computer2 port
•DisplayPort
B
Each time the button is pressed, it cycles through the images being input
from the following sources.
•Video port
•HDMI port
C
Each time the button is pressed, it cycles through the images being input
from the following sources.
•USB Display
•Images from the device connected to the USB(TypeA) port
D
Switches to the image from the network connected device.
Projecting with USB Display
You can use a USB cable to connect the projector to a computer to project
images from the computer.
You can project images and send audio with one USB cable.
System requirements
For Windows
OS
Windows 2000
*1
Windows XPProfessional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Windows VistaUltimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
Windows 7Ultimate 32/64 bit
Enterprise 32/64 bit
Professional 32/64 bit
Home Premium 32/64 bit
Home Basic 32 bit
Starter 32 bit
CPU
Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
Amount of Memory
256 MB or more
Recommended: 512 MB or more
Hard Disk
Space
20 MB or more
Projecting Images
32
Display
Resolution of no less than 640x480 and no higher
than 1600x1200.
Display color in 16-bit color or greater
*1Service Pack 4 only
For Mac OS X
OS
Mac OS X 10.5.x 32 bit
Mac OS X 10.6.x 32/64 bit
Mac OS X 10.7.x 32/64 bit
CPU
Power PC G4 1GHz or faster
Recommended: Core Duo 1.83GHz or faster
Amount of Memory
512 MB or more
Hard Disk
Space
20 MB or more
Display
Resolution of no less than 640x480 and no higher than
1680x1200.
Display color in 16-bit color or greater
Connecting for the first time
The first time you connect the projector and the computer using the USB
cable, the driver needs to be installed. The procedure is different for
Windows and Mac OS X.
a
•You do not need to install the driver the next time you connect.
•When inputting images from multiple sources, change the input
source to USB Display.
•Use a commercially available USB cable.
•If you use a USB hub, the connection may not operate correctly.
Connect the USB cable directly to the projector.
For Windows
a
Connect the computer's USB port to the projector's USB(TypeB)
port using a USB cable.
a
For Windows 2000 or Windows XP, a message asking you if
you want to restart your computer may be displayed. Select
No.
For Windows 2000
Double-clickComputer, EPSON PJ_UD, and then
EMP_UDSE.EXE.
For Windows XP
Driver installation starts automatically.
For Windows Vista/Windows 7
When the dialog box is displayed, clickRun EMP_UDSE.exe.
b
When the License Agreement screen is displayed, clickAgree.
Projecting Images
33
c
Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
d
Disconnect the USB cable when you finish projection.
When disconnecting the USB cable, there is no need to useSafely
Remove Hardware.
a
•If it is not installed automatically, double-click My Computer
- EPSON_PJ_UD - EMP_UDSE.EXE on your computer.
•If nothing is projected for some reason, click All Programs -
EPSON Projector - Epson USB Display - Epson USB
Display Vx.xx on your computer.
•When using a computer running Windows 2000 under user
authority, a Windows error message is displayed and you may
not be able to use the software. In this case, try updating
Windows to the latest version, restart, and then try to connect
again.
For more details, contact your local dealer or the nearest
address provided in the following document.
sEpson Projector Contact List
For Mac OS X
a
Connect the computer's USB port to the projector's USB(TypeB)
port using a USB cable.
The Setup folder of USB Display is displayed in the Finder.
b
Double-click theUSB Display Installer icon.
c
Follow the on-screen instructions to install.
d
When the License Agreement screen is displayed, clickAgree.
Enter the administrator authority password and start the installation.
When the installation is complete, the USB Display icon is displayed
in the Dock and menu bar.
e
Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
f
When you finish projection, selectDisconnect from theUSB
Display icon menu on the menu bar or Dock, and then remove
the USB cable.
a
•If the USB Display setup folder is not displayed automatically
in the Finder, double-clickEPSON PJ_UD - USB Display
Installer on your computer.
•If nothing is projected for some reason, click theUSB
Display icon in the Dock.
•If there is noUSB Display icon in the Dock, double-click
USB Display from the Applications folder.
•If you selectExit from theUSB Display icon menu on the
Dock, USB Display does not start automatically when you
connect the USB cable.
Uninstalling
For Windows 2000
a
ClickStart, select Settings, and then click Control Panel.
b
Double-clickAdd/Remove Programs.
c
ClickChange or Remove Programs.
d
SelectEpson USB Display and clickChange/Remove.
Projecting Images
34
For Windows XP
a
ClickStart, and then click Control Panel.
b
Double-clickAdd or Remove Programs.
c
Select Epson USB Display and clickRemove.
For Windows Vista/Windows 7
a
ClickStart, and then click Control Panel.
b
ClickUninstall a program under Programs.
c
Select Epson USB Display and clickUninstall.
For Mac OS X
a
Open theApplications folder, double-click USB Display, and then
double-clickTool.
b
RunUSB Display UnInstaller.
Projecting Images
35
Correcting Keystone Distortion
You can correct keystone distortionusing one of the following methods.
•Correcting automatically (Auto V-Keystone)
•Correcting manually (H-Keystone Adjuster)
Manually corrects horizontal keystone distortion using the horizontal
keystone adjuster.
•Correcting manually (H/V-Keystone)
Manually correct distortion in the horizontal and vertical directions
independently.
•Correcting manually (Quick Corner)
Manually correct the four corners independently.
a
When you correct keystone distortion, the projected image may be
reduced.
Correcting automatically
Auto V-Keystone
When the projector detects any movement, for example when it is moved
or tilted, it automatically corrects vertical keystone distortion. This function
is called Auto V-Keystone.
When the projector is moved, it displays a screen for adjustment and then
automatically corrects the projected image.
You can use Auto V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 30˚ up and down
Adjusting Projected Images
36
a
•Auto V-Keystone works only when Projection is set to Front from
the Configuration menu.
sExtended - Projectionp.91
•If you do not want to enable Auto V-Keystone, setAuto V-
Keystone toOff.
sSettings - Keystone - H/V-Keystone - Auto V-Keystone
p.90
Correcting manually
You can manually correct keystone distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx 30˚ right and left/approx. 30˚ up and down
H-Keystone Adjuster
Move the horizontal keystone adjuster to the right or left to perform
horizontal keystone correction.
a
•When using horizontal keystone adjuster, setH-Keystone Adjuster
Repeat procedures 3 to 5 until corrections are finished.
g
When all corrections are finished, press the [Menu] button to finish
making settings.
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
a
Once a User's Logo has been saved, the logo cannot be returned to the
factory default.
a
Project the image you want to save as the User's Logo, and then
press the [Menu] button.
s "Using the Configuration Menu"p.85
Using the remote controlUsing the control panel
b
SelectUser's Logo fromExtended.
Projection Functions
68
a
•WhenUser's Logo Protect fromPassword Protect is set to
On, a message is displayed and the User's Logo cannot be
changed. You can make changes after settingUser's Logo
Protect toOff.
s "Managing Users (Password Protect)"p.70
•IfUser's Logo is selected when Keystone, E-Zoom, Aspect, or
Adjust Zoom are being performed, the function currently
being performed is temporarily cancelled.
c
When the message "Choose this image as the User's Logo?" is
displayed, selectYes.
a
When you press the [] button on the remote control or the
control panel, the screen size may change depending on the
signal to match the actual resolution of the image signal.
d
Move the box to select the part of the image to use as the User's
Logo.
You can perform the same operations from the projector's control
panel.
Remote control
a
You can save at 400x300 dots in size.
e
When you press the [] button and the message "Select this
image?" is displayed, selectYes.
f
Select the zoom factor from the zoom setting screen.
g
When the message "Save this image as the User's Logo?" is
displayed, selectYes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a
•When a User's Logo is saved, the previous User's Logo is
erased.
•It takes a while to save. Do not operate the projector or any
connected equipment while it is saving, otherwise
malfunctions may occur.
Projection Functions
69
The projector has the following enhanced security functions.
•Password Protect
You can limit who can use the projector.
•Control Panel Lock
You can prevent people changing the settings on the projector without
permission.
s "Restricting Operation (Control Panel Lock)"p.72
•Anti-Theft Lock
The projector is equipped with the following anti-theft security device.
s "Anti-Theft Lock"p.73
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the password
cannot use the projector to project images even if the projector power is on.
Furthermore, the user's logo that is displayed when you turn on the
projector cannot be changed. This acts as an anti-theft function as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protect is not activated.
Kinds of Password Protect
The following three kinds of Password Protect settings can be made
according to how the projector is being used.
•Power On Protect
When Power On Protect is On, you need to enter a preset password after
the projector is plugged in and turned on (this also applies to Direct
Power On). If the correct password is not entered, projection does not
start.
•User's Logo Protect
Even if someone tries to change the User's Logo set by the owner of the
projector, it cannot be changed. When User's Logo Protect is set to On,
the following setting changes for the User's Logo are prohibited.
•Capturing a User's Logo
•SettingDisplay Background, Startup Screen, or A/V Mute from
Display
sExtended - Displayp.91
•Network Protect
When Network Protect is set to On, changing the settings for Network is
prohibited.
s
"Network Menu"p.93
Setting Password Protect
Use the following procedure to set Password Protect.
a
During projection, hold down the [Freeze] button for about five
seconds.
The Password Protect setting menu is displayed.
Remote control
Security Functions
70
a
•If Password Protect is already activated, you must enter the
password.
If the password is entered correctly, the Password Protect
setting menu is displayed.
s "Entering the Password"p.71
•When the password is set, stick the supplied password protect
sticker in a visible position on the projector as a further theft
deterrent.
b
Select the type of Password Protect you want to set, and then
press the [
] button.
c
Select On, and then press the [] button.
Press the [Esc] button, the screen displayed in step 2 is displayed
again.
d
Set the password.
(1)
Select Password, and then press the [
] button.
(2)
When the message "Change the password?" is displayed, select Yes and
then press the [
] button. The default password is set to "0000". Change
this to your own desired Password. If you select No, the screen displayed
in step 2 is displayed again.
(3)While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "****". When
you enter the fourth digit, the confirmation screen is displayed.
Remote control
(4)Re-enter the password.
The message "Password accepted." is displayed.
If you enter the password incorrectly, a message is displayed prompting
you to re-enter the password.
Entering the Password
When the password entry screen is displayed, enter the password using the
remote control.
While holding down the [Num] button, enter the password by pressing the
numeric buttons.
Security Functions
71
When you enter the correct password, Password Protect is temporarily
released.
Attention
•If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately five
minutes, and then the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet and then reinsert it and
turn the projector's power back on. The projector displays the password entry
screen again so that you can enter the correct password.
•If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact the nearest address
provided in the Epson Projector Contact List.
sEpson Projector Contact List
•If you continue to repeat the above operation and input the wrong password
thirty times in succession, the following message is displayed and the
projector does not accept any more password entries. "The projector's
operation will be locked. Contact Epson as described in your documentation."
sEpson Projector Contact List
Restricting Operation (Control Panel Lock)
Perform one of the following to lock the operation buttons on the control
panel.
•Full Lock
All of the buttons on the control panel are locked. You cannot perform
any operations from the control panel, including turning the power on or
off.
•Partial Lock
All of the buttons on the control panel, except for the [
t] button, are
locked.
This is useful at events or shows when you want to deactivate all buttons
during projection or at schools when you want to limit button operation.
The projector can still be operated using the remote control.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu"p.85
Using the remote controlUsing the control panel
b
SelectControl Panel Lock fromSettings.
c
Select either Full Lock or Partial Lock according to your purpose.
Security Functions
72
d
Select Yes when the confirmation message is displayed.
The control panel buttons are locked according to the setting you
chose.
a
You can release the control panel lock by one of the following
two methods.
•SelectOff fromControl Panel Lock.
s
Settings - Control Panel Lockp.90
•Press and hold down the [
] button on the control panel
for about seven seconds, a message is displayed and the lock
is released.
Anti-Theft Lock
The projector is equipped with the following types of anti-theft security
devices.
•Security slot
The security slot is compatible with the Microsaver Security System
manufactured by Kensington.
See the following for more details on the Microsaver Security System.
shttp://www.kensington.com/
•Security cable installation point
A commercially available theft-prevention wire lock can be passed
through the installation point to secure the projector to a desk or pillar.
Installing the wire lock
Pass an anti-theft wire lock through the installation point.
See the documentation supplied with the wire lock for locking instructions.
Security Functions
73
About EasyMP Monitor
EasyMP Monitor lets you carry out operations such as checking the status
of multiple Epson projectors that are connected to a network at a computer
monitor, and controlling the projectors from the computer.
You can download EasyMP Monitor from the following Web site.
http://www.epson.com
The following provides brief descriptions of the monitoring and control
functions that can be carried out using EasyMP Monitor.
•Registering projectors for monitoring and control
Projectors on the network can be searched for automatically, and you can
then select which projectors you want to register from the projectors that
are detected.
You can register target projectors by entering their IP addresses.
•Registered projectors can also be assigned to groups so that they can
be monitored and controlled in groups.
•Monitoring the status of registered projectors
You can check the power status (ON/OFF) for projectors and problems or
warnings that require attention by using the icons.
You can select groups of projectors or a single projector and then check
the cumulative lamp operating time or information such as input sources,
problems, and warnings for the projectors.
•Controlling registered projectors
Projectors can be selected in groups or as single projectors, and you can
then carry out operations for the selected projectors such as turning the
power on and off and switching their input sources.
You can use Web Control functions to change the settings in the
projector's configuration menu.
If there are certain control actions which are carried out regularly at
particular times or on particular days, you can use Timer Settings to
register timer settings.
•Mail Notification settings
You can set email addresses to which notifications are sent if a status that
requires attention, such as a problem, occurs with a registered projector.
•Sending messages to registered projectors
You can use the Message Broadcasting plugin for EasyMP Monitor to
send JPEG files to registered projectors.
Download the Message Broadcasting plugin from the Web site address
provided at the beginning of this chapter.
Changing Settings Using a Web Browser (Web
Control)
By using the Web browser of a computer connected to the projector on a
network, you can make settings and control the projector. This function
allows you to perform setup and control operations remotely. In addition,
since you can use the computer's keyboard, entering characters required for
the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using a
Mac OS X, use Safari.
a
If you setStandby Mode toCommunication On, you can use the
Web browser to make settings and perform control even if the
projector is in standby mode (when the power is off).
sExtended - Standby Modep.91
Projector setup
In the Web browser, you can set items that are usually set in the projector's
Configuration menu. The settings are reflected in the Configuration menu.
There are also items that can only be set in the Web browser.
Monitoring and Controlling
74
Items in the Configuration menu that cannot be set by the Web browser
•Settings Menu - Test Pattern
•Settings Menu - Pointer Shape
•Settings Menu - User Button
•Extended Menu - User's Logo
•Extended Menu - Language
•Extended Menu - Operation - High Altitude Mode
•Extended Menu - Operation - Lens Cover Timer
•Reset Menu - Reset All and Reset Lamp Hours
The settings for items on each menu are the same as the projector's
Configuration menu.
s "Configuration Menu"p.84
Items that can only be set with a Web browser
•SNMP Community Name (up to 32 single-byte alphanumeric characters)
•Monitor Password (up to 16 single-byte alphanumeric characters)
Displaying the Web Control screen
Use the following procedure to display the Web Control screen.
Make sure the computer and projector are connected to the network.
a
If your Web browser is set up to connect via a proxy server, the Web
Control screen cannot be displayed. To display Web Control, you need
to make settings so that a proxy server is not used for a connection.
a
Start the Web browser on the computer.
b
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
The Web Control screen is displayed.
When Web Control Password is set in the Network menu from the
projector's Configuration menu, the password entry screen is
displayed.
c
The user ID and password entry screen is displayed.
Enter "EPSONWEB" as the user ID.
The default password is "admin".
a
•Enter the user ID even if the password setting is disabled.
You cannot change the user ID.
•You can change the password in Network menu from the
Configuration menu.
sNetwork - Basic - Web Control Passwordp.95
Displaying the Web Remote screen
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
a
Display the Web Control screen.
b
ClickWeb Remote.
Monitoring and Controlling
75
c
The Web Remote screen is displayed.
NameFunction
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Computer] button
Each time the button is pressed, it cycles through the
following images:
•Computer1 port
•Computer2 port
•DisplayPort
C
[Video] button
Each time the button is pressed, it cycles through the
following images:
•Video port
•HDMI port
D
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.61
E
[A/V Mute] button
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.61
NameFunction
F
[Page] buttons
[Up] [Down]
Changes pages in files such as PowerPoint files when using
the following projection methods.
•When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
•When using USB Display
s "Projecting with USB Display" p.32
•When connecting to a network
When projecting images using Slideshow, pressing these
buttons displays the previous/next screen.
G
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
H
[LAN] button
Switches to the image from the network connected device.
s "Switching to the Target Image by Remote Control"
p.32
I
[USB] button
Each time the button is pressed, it cycles through the
following images:
•USB Display
•Images from the device connected to the USB(TypeA)
port
J
[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s
"Adjusting the Volume" p.41
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
Monitoring and Controlling
76
sNetwork - Mail - Mail Notificationp.96
a
•Up to a maximum of three notification destinations (addresses) can
be registered, and notification messages can be sent to all three
destinations at once.
•If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
•If you setStandby Mode toCommunication On, you can control
the projector even if it is in standby mode (when the power is
off).
sExtended - Standby Modep.91
Reading Error Notification Mail
When the Mail Notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Mail sender: Address for Address 1
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The main message
contents are listed below.
•Internal error
•Fan related error
•Sensor error
•Lamp timer failure
•Lamp out
•Internal temperature error
•High-speed cooling in progress
•Lamp replacement notification
•No-signal
No Signal is input to the projector. Check the connection status or check
that the power for the signal source is turned on.
•Auto Iris Error
•Power Err. (Ballast)
See the following to deal with problems or warnings.
s "Reading the Indicators"p.104
Management Using SNMP
By setting SNMP to On in the Configuration menu, notification messages
are sent to the specified computer when a problem or warning occurs. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s
Network - Others - SNMPp.98
a
•SNMP should be managed by a network administrator or someone
who is familiar with the network.
•To use the SNMP function to monitor the projector, you need to
install the SNMP manager program on your computer.
•Up to two destination IP addresses can be saved.
Monitoring and Controlling
77
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
Command list
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The main contents are listed below.
ItemCommand
Power ON/OFFOnPWR ON
OffPWR OFF
Signal selectionComputer1AutoSOURCE 1F
RGBSOURCE 11
ComponentSOURCE 14
Computer2AutoSOURCE 2F
RGBSOURCE 21
ComponentSOURCE 24
HDMISOURCE 30
VideoSOURCE 41
USB DisplaySOURCE 51
USBSOURCE 52
LANSOURCE 53
DisplayPortSOURCE 70
ItemCommand
A/V Mute On/OffOnMUTE ON
OffMUTE OFF
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
For more details, contact your localdealer or the nearest address provided
in the Epson Projector Contact List.
sEpson Projector Contact List
Cable layouts
Serial connection
•Connector shape: D-Sub 9-pin (male)
Monitoring and Controlling
78
•Projector input port name: RS-232C
<At the projector><At the computer>
<At the projector>(PC serial cable)<At the computer>
Signal NameFunction
GNDSignal wire ground
TDTransmit data
RDReceive data
Communications protocol
•Default baud rate setting: 9600 bps
•Data length: 8 bit
•Parity: None
•Stop-bit: 1 bit
•Flow control: None
About PJLink
PJLink Class1 was established by the JBMIA (Japan Business Machine and
Information System Industries Association) as a standard protocol for
controlling network-compatible projector's as part of their efforts to
standardize projector control protocols.
The projector complies with the PJLink Class1 standard established by the
JBMIA.
You need to make network settings before you can use PJLink. See the
following for more information on network settings.
s "Network Menu"p.93
It complies with all commands except for the following commands defined
by PJLink Class1, and agreement was confirmed by the PJLink standard
adaptability verification.
URL:http://pjlink.jbmia.or.jp/english/
•Non-compatible commands
FunctionPJLink Command
Mute settingsImage muting setAVMT 11
Audio muting setAVMT 21
•Input names defined by PJLink and corresponding projector sources
SourcePJLink Command
Computer1INPT 11
Computer2INPT 12
VideoINPT 21
HDMIINPT 32
DisplayPortINPT 35
USBINPT 41
Monitoring and Controlling
79
SourcePJLink Command
LANINPT 52
USB DisplayINPT 53
•Manufacturer name displayed for "Manufacture name information query"
EPSON
•Model name displayed for "Product name information query"
EB-1960/EB-C760X/PowerLite 1960
EB-1950/EB-C750X/PowerLite 1950
EB-1940W/EB-C740W/PowerLite 1940W
EB-1930/EB-C740X/PowerLite 1930
About Crestron RoomView
®
Crestron RoomView
®
is an integrated control system provided by
Crestron
®
. It can be used to monitor and control multiple devices
connected on a network.
The projector supports the control protocol, and can therefore be used in a
system built with Crestron RoomView
®
.
Visit the Crestron
®
Web site for details on Crestron RoomView
®
. (Only
English-language displays are supported.)
http://www.crestron.com
The following provides an overview of Crestron RoomView
®
.
•Remote operation using a Web browser
You can operate a projector from your computer just like using a remote
control.
•Monitoring and control with application software
You can use Crestron RoomView
®
Express or Crestron RoomView
®
Server Edition provided by Creston
®
to monitor devices in the system, to
communicate with the help desk, and to send emergency messages. See
the following Web site for details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using
a Web browser.
a
•You can only enter single-byte alphanumeric characters and symbols.
•The following functions cannot be used while using Crestron
RoomView
®
.
s "Changing Settings Using a Web Browser (Web Control)"
p.74
Message Broadcasting (EasyMP Monitor plug-in)
•If you setStandby Mode toCommunication On, you can control
the projector even if it is in standby mode (when the power is
off).
sExtended - Standby Modep.91
Operating a projector from your computer
Displaying the operation window
Check the following before carrying out any operations.
•Make sure the computer and projector are connected to the network.
•Set Crestron RoomView toOn from theNetwork menu.
sNetwork - Others - Crestron RoomViewp.98
a
Start the Web browser on the computer.
Monitoring and Controlling
80
b
Enter the IP address of the projector in the address field of the
Web browser, and press the Enter key on the keyboard.
The operation window is displayed.
Using the operation window
A
You can perform the following operations when you click the buttons.
ButtonFunction
PowerTurns the projector power on or off.
Vol-/Vol+Adjusts the volume.
ButtonFunction
A/V MuteTurns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.61
B
Switch to the image from the selected input source. To display input sources that
are not shown in Source List, click (a) or (b) to scroll up or down. The current
video signal input source is displayed in blue.
You can change the source name if necessary.
C
You can perform the following operations when you click the buttons. To display
buttons that are not shown in Source List, click (c) or (d) to scroll left or right.
ButtonFunction
FreezeImages are paused or unpaused.
s "Freezing the Image (Freeze)" p.61
ContrastAdjusts the difference between light and shade in the
images.
BrightnessAdjusts the image brightness.
ColorAdjusts the color saturation for the images.
SharpnessAdjusts the image sharpness.
Zoom
Click the [z] button to enlarge the image without
changing the projection size. Click the [x] button to
reduce an image that was enlarged with the [
z
] button.
Click the [
], [], [], or [] button to change the
position of an enlarged image.
s "Enlarging Part of the Image (E-Zoom)" p.63
D
The [], [], [], and [] buttons perform the same operations as the [],
[
], [] and [] buttons on the remote control. You can perform the following
operations when you click the other buttons.
Monitoring and Controlling
81
ButtonFunction
OK
Performs the same operation as the [
] button on the
remote control.
s "Remote Control" p.15
MenuDisplays and closes the Configuration menu.
AutoIf clicked while projecting analog RGB signals from
Computer1 port or Computer2 port, automatically
optimizes the image by adjusting the Tracking, Sync.,
and Position.
SearchChanges to the next input source that is sending an
image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
EscPerforms the same operation as the [Esc] button on the
remote control.
s "Remote Control" p.15
E
You can perform the following operations when you click the tabs.
TabFunction
Contact IT HelpDisplays the Help Desk window. Used to send messages
to, and receive messages from, the administrator using
Crestron RoomView
®
Express.
InfoDisplays information on the projector that is currently
connected.
ToolsChanges settings in the projector that is currently
connected. See the next section.
Using the tools window
The following window is displayed when you click theTools tab on the
operation window. You can use this window to change settings in the
projector that is currently connected.
A
Crestron Control
Make settings for Crestron
®
central controllers.
B
Projector
The following items can be set.
ItemFunction
Projector NameEnter a name to differentiate the projector that is
currently connected from other projectors on the
network. (The name can contain up to 15 single-byte
alphanumeric characters.)
LocationEnter an installation location name for the projector
that is currently connected on the network. (The name
can contain up to 32 single-byte alphanumeric
characters and symbols.)
Assigned ToEnter a user name for the projector. (The name can
contain up to 32 single-byte alphanumeric characters
and symbols.)
Monitoring and Controlling
82
ItemFunction
DHCPSelect the Enabled check box to use DHCP. You cannot
enter an IP address if DHCP is enabled.
IP AddressEnter the IP address to assign to the currently connected
projector.
Subnet MaskEnter a subnet mask for the currently connected
projector.
Default GatewayEnter the gateway address for the currently connected
projector.
SendClick this button to confirm the changes made to the
Projector.
C
Admin Password
Select the Enabled check box to require a password to open the Tools window.
The following items can be set.
ItemFunction
New PasswordEnter the new password when changing the password to
open the Tools window. (The name can contain up to 26
single-byte alphanumeric characters.)
ConfirmEnter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
SendClick this button to confirm the changes made to the
Admin Password.
D
User Password
Select the Enabled check box to require a password to open the operation window
on the computer.
The following items can be set.
ItemFunction
New PasswordEnter the new password when changing the password to
open the operation window. (The name can contain up
to 26 single-byte alphanumeric characters.)
ConfirmEnter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
SendClick this button to confirm the changes made to the
User Password.
Monitoring and Controlling
83
Configuration Menu
This chapter explains how to use theConfiguration menu and its functions.
This section explains how to use the Configuration menu.
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.
a
Display the Configuration menu screen.
b
Select a top menu item.
c
Select a submenu item.
d
Change settings.
e
Press the [Menu] button to finish making settings.
Using the Configuration Menu
85
Configuration Menu Table
Settable items vary depending on the model being used and the image
signal and source being projected.
Top Menu NameSubmenu NameItems or Setting Values
Image menu
sp.87
Color ModeDynamic, Presentation, Theatre,
Photo, Sports, sRGB, Blackboard,
Whiteboard, and DICOM SIM
Brightness-24 to 24
Contrast-24 to 24
Color Saturation-32 to 32
Tint-32 to 32
Sharpness-5 to 5
Abs. Color Temp.5000K to 10000K
AdvancedGamma, RGB, and RGBCMY
Auto IrisOn and Off
Signal menu
sp.88
Auto SetupOn and Off
ResolutionAuto, Wide, and Normal
Tracking-
Sync.-
PositionUp, Down, Left, and Right
ProgressiveOff, Video, and Film/Auto
Noise ReductionOff, NR1, and NR2
HDMI Video RangeAuto, Normal, and Expanded
DisplayPort Video
Range
Auto, Normal, and Expanded
Input SignalAuto, RGB, and Component
Top Menu NameSubmenu NameItems or Setting Values
Video SignalAuto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, and
SECAM
AspectNormal, Auto, 4:3, 16:9, Full,
Zoom, and Native
OverscanAuto, Off, 4%, and 8%
Image ProcessingFast, Fine
Settings menu
sp.90
KeystoneH/V-Keystone and Quick Corner
Split Screen-
Control Panel LockFull Lock, Partial Lock, and Off
Pointer ShapePointer 1, 2, and 3
Power ConsumptionNormal and ECO
Volume0 to 20
Remote ReceiverFront/Rear, Front, Rear, and Off
User ButtonPower Consumption, Info,
Progressive, Test Pattern, Multi-
screen, and Resolution
Test Pattern-
Extended menu
sp.91
DisplayMessages, Display Background,
Startup Screen, and A/V Mute
User's Logo-
ProjectionFront, Front/Ceiling, Rear, and
Rear/Ceiling
OperationDirect Power On, Sleep Mode,
Sleep Mode Timer, Lens Cover
Timer, High Altitude Mode, and
Audio Input
Standby ModeCommunication On and
Communication Off
Projector IDOff, or 1 to 9
List of Functions
86
Top Menu NameSubmenu NameItems or Setting Values
Multi-screenAdjustment Level, Brightness
Correct., Color Correct. (G/R),
and Color Correct. (B/Y)
Language15 or 35 languages
*1
Info menu
sp.99
Lamp Hours-
Source-
Input Signal-
Resolution-
Video Signal-
Refresh Rate-
Sync Info-
Status-
Serial Number-
Event ID-
Reset menu
sp.100
Reset All-
Reset Lamp Hours-
*1The number of supported languages differs depending on the region where the
projector is used.
Network menu
Top Menu NameSubmenu NameItems or Setting Values
Basic menu
sp.95
Projector Name-
PJLink Password-
Web Control Password-
Projector KeywordOn and Off
Wired LAN menu
sp.96
IP SettingsDHCP, IP Address, Subnet Mask,
and Gateway Address
Top Menu NameSubmenu NameItems or Setting Values
IP Address DisplayOn and Off
Mail menu
sp.96
Mail NotificationOn and Off
SMTP Server-
Port Number-
Address 1 Setting, Ad‐
dress 2 Setting, and Ad‐
dress 3 Setting
-
Others menu
sp.98
SNMPOn and Off
Trap IP Address 1 and
Trap IP Address 2
-
AMX Device DiscoveryOn and Off
Crestron RoomViewOn and Off
BonjourOn and Off
Message BroadcastingOn and Off
Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting detailsare saved for each image signal.
List of Functions
87
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)"p.31
SubmenuFunction
Color Mode
You can select the quality of the image to suit your surroundings.
s "Selecting the Projection Quality (Selecting Color Mode)"
p.43
Brightness
You can adjust the image brightness.
Contrast
You can adjust the difference between light and dark in the
images.
Color Saturation
(Adjustment is only possible when component video or
composite video images are being input.)
You can adjust the color saturation for the images.
Tint
(Adjustment is possible when a component video signal is being
input. If a composite video signal is input, adjustment is only
possible when NTSC signals are being input.)
You can adjust the image tint.
Sharpness
You can adjust the image sharpness.
SubmenuFunction
Abs. Color Temp.
You can adjust the overall tint of the image. You can adjust tints
in 10 stages from 5000 K to 10000 K. The image is tinted blue
when a high value is selected and tinted red when a low value is
selected.
Advanced
You can make adjustments by choosing the following items.
Gamma: You can adjust the coloring by selecting one of the
gamma correction values, or referring to the projected image or a
gamma graph.
RGB: You can adjust the individual R (red), G (green), and B
(blue) components of the offset and gain.
RGBCMY: You can adjust the hue, saturation, and brightness of
each color R (red), G (green), B (blue), C (cyan), M (magenta), Y
(yellow) individually.
Auto Iris
(This item can be set only if Color Mode is set to Dynamic or
Theatre.)
Set to On to adjust the iris to obtain the optimum light for images
being projected.
The setting is stored for each Color Mode.
s "Setting Auto Iris" p.44
Reset
You can reset all adjustment values for the Image menu to their
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu" p.100
Signal Menu
Settable items vary depending on the image signal and source currently
being projected. Setting detailsare saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display, USB, or LAN.
List of Functions
88
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)"p.31
SubmenuFunction
Auto Setup
(Only available when an analog RGB computer signal is
being input.)
Set toOn to automatically adjust Tracking, Sync., and
Position to the optimum state when the input signal
changes.
Resolution
(Only available when an analog RGB computer signal is
being input.)
Set toAuto to automatically identify the resolution of the
input signal. If images are not projected correctly when set
to Auto, for example if some of the image is missing, adjust
toWide for wide screens, or set toNormal for 4:3 or 5:4
screens depending on the connected computer.
Tracking
(Only available when an analog RGB computer signal is
being input.)
You can adjust computer images when vertical stripes
appear in the images.
SubmenuFunction
Sync.
(Only available when an analog RGB computer signal is
being input.)
You can adjust computer images when flickering, fuzziness,
or interference appear in the images.
Position
(This item cannot be set when the source is HDMI or
DisplayPort.)
You can adjust the display position up, down, left, and right
when a part of the image is missing so that the whole image
is projected.
Progressive
(This setting can only be adjusted when a composite video
signal is being input. When a component video or RGB
video is being input, this setting can only be adjusted if the
signal being input is an interlaced signal (480i/576i/1080i).)
Interlace
g
(i) signal is converted toProgressive
g
(p). (IP
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics,
and animation.
Noise Reduction
(This cannot be set when a digital RGB signal is input,
when projecting an interlaced signal while Progressive is set
to Off, or when a 480p, 576p, or 1080p signal is input while
Image Processing is set toFast.)
Smoothes out rough images. There are two modes. Select
your favorite setting. It is recommended that this is set to
Off when viewing image sources in which noise is very low,
such as for DVDs.
HDMI Video
Range
When the projector's HDMI port is connected to a DVD
player, set the projector's video range according to the DVD
player's video range setting.
DisplayPort Vid‐
eo Range
When the projector's DisplayPort port is connected to a
computer, set the projector's video range according to the
computer's video range setting.
List of Functions
89
SubmenuFunction
Input Signal
You can select input signal from Computer port.
If set toAuto, the input signal is set automatically
according to the connected equipment.
If colors do not appear correctly when set toAuto, select
the appropriate signal according to the connected
equipment.
Video Signal
You can select the input signal from the Video port. If set
toAuto, video signals are recognized automatically. If
interference appears in the image or a problem occurs such
as no image is being projected when set to Auto, select the
appropriate signal according to the connected equipment.
Aspect
You can set the
aspectratio
g
for projected images.
s "Changing the Aspect Ratio of the Projected Image "
p.44
Overscan
(This setting can only be adjusted when a component video
or RGB video signal is being input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%.
When the source is HDMI, Auto is available. WhenAuto is
selected, it automatically changes toOff or 8% according to
the input signal.
Image Process‐
ing
Changes settings for image processing.
Fast: Images are displayed quicker. The pen's tracking delay
is improved when using the optional interactive unit.
Fine: Images are displayed in higher quality.
Reset
You can reset all adjustment values on theSignal menu to
their default settings, except forInput Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu"p.100
Settings Menu
SubmenuFunction
Keystone
You can correct keystone distortion.
•When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set H-Keystone Adjuster and Auto V-
Keystone to On or Off.
s "Correcting Keystone Distortion" p.36
•When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner"p.38
Split Screen
You can split the screen into two screens.
You can change the Screen Size, and select the Source, Swap
Screens, Audio Source, and Exit Split Screen.
s "Projecting Two Images Simultaneously (Split Screen) "
p.49
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.72
List of Functions
90
SubmenuFunction
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)" p.62
Power Consump‐
tion
You can set the lamp brightness to one of two settings.
Select ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When ECO is selected, the power consumption and the lamp's
operating life are changed as follows, and fan rotation noise
during projection is reduced.
Electrical consumption: about 25% decrease, lamp life: about 1.4
times longer
Volume
You can adjust the volume. Setting values are saved for each
source.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
User Button
You can select and assign an item from the Configuration menu
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Power Consumption, Info, Progressive, Test Pattern, Multi-
screen, and Resolution
SubmenuFunction
Test Pattern
You can display a test pattern to adjust the projection without
connecting other equipment when you set up the projector.
While the test pattern is displayed, zoom, focus adjustments, and
keystone correction can be performed. To cancel the test pattern,
press the [Esc] button on the remote control or the control panel.
Attention
If a pattern is displayed for a long time, a residual
image may be visible in projected images.
Reset
You can reset all adjustment values on the Settings menu to their
default settings, except for User Button.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.100
Extended Menu
List of Functions
91
SubmenuFunction
Display
You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
*1
: You can set the screen background
toBlack, Blue, or Logo when no image signal is available.
Startup Screen
*1
: Set to On to display theUser's Logo
when projection starts.
A/V Mute
*1
: You can set the screen displayed when the
remote control's [A/V Mute] button is pressed toBlack,
Blue, or Logo.
User's Logo
*1
You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo"p.68
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
Front
W
Front/Ceiling
Rear
W
Rear/Ceiling
s "Installation Methods"p.20
SubmenuFunction
Operation
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops
projection when no image signal is being input and no
operations are carried out.
Sleep Mode Timer: When Sleep Mode is set toOn, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
Lens Cover Timer: When set to On, this turns off the
power automatically 30 minutes after the A/V mute slide is
closed.
The default value is On.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Audio Input: When set to Auto, the audio from the input
source is output.
When set toAudio1, Audio2, or Audio (L/R), audio is
output from the selected port regardless of the input source
as long as audio is input from the audio input port.
Standby Mode
If you setCommunication On, you can perform the
following operations even if the projector is in standby
mode.
•Monitoring and controlling the projector over a network
s "Monitoring and Controlling" p.74
•Outputting analog RGB signals from the Computer1 port
to an external monitor
Projector ID
Set the ID to a number between 1 and 9. Off indicates that
no ID is set.
s "Setting the projector ID"p.66
List of Functions
92
SubmenuFunction
Multi-screen
You can adjust the hue and brightness of each projected
image when multiple projectors are lined up and projecting.
Adjustment Level: You can adjust from black to white in
five stages called Level 1 to 5, and in each of these 5 levels,
you can adjust Brightness Correct. and Color Correct.
Brightness Correct.: You can correct the difference in the
brightness of each projector.
Color Correct. (G/R) / Color Correct. (B/Y): You can
correct the difference in the color of each projector.
s "Correcting the Color Difference when Projecting from
Multiple Projectors"p.65
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values forDisplay
*1
and
Operation
*2
from theExtended menu to their default
settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu"p.100
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect toOff.
s "Managing Users (Password Protect)"p.70
*2Except for High Altitude Mode.
Network Menu
WhenNetwork Protect is set toOn inPassword Protect, a message is
displayed and the network settings cannot be changed. Set Network Protect
toOff and then configure the network.
s "Setting Password Protect"p.70
SubmenuFunction
Net. Info. - Wired
LAN
Displays the following network setting status information.
•Projector Name
•DHCP
•IP Address
•Subnet Mask
•Gateway Address
•MAC Address
Network Config‐
uration
The following menus are available for setting Network items.
Basic, Wired LAN, Mail, Others, and Reset
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s "Changing Settings Using a Web Browser (Web Control)"p.74
List of Functions
93
Notes on operating the Network menu
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Complete menu, and select Yes, No,
orCancel. When you select Yes orNo, you are returned to the
Configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [
], [], [], and [] buttons on the remote control or the [w],
[
v], [a], and [b] buttons on the control panel to move the cursor to the
desired key, and then press the [
] button to enter the alphanumeric
character. Enter figures by holding down the [Num] button on the remote
control, and pressing the numeric buttons. After inputting, press Finish on
the keyboard to confirm your input. Press Cancel on the keyboard to cancel
your input.
•Each time theCAPS key is selected and the [] button is pressed, it
sets and changes between upper case and lower case letters.
•Each time theSYM1/2 key is selected and the [
] button is pressed, it
sets and changes the symbol keys for the section enclosed by the frame.
List of Functions
94
Basic menu
SubmenuFunction
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. Enter no more than eight single-
byte alphanumeric characters. Web Control is a computer
function that allows you to set up and control the projector by
using the Web browser on a computer connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.74
SubmenuFunction
Projector Key‐
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
sEasyMP Network Projection Operation Guide
List of Functions
95
Wired LAN menu
SubmenuFunction
IP Settings
You can make settings related to the following addresses.
DHCP
g
: Set to On to configure the network using DHCP. If this
is set to On, you cannot set any more addresses.
IP Address
g
: You can input the IP address assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
g
: You can input the subnet mask for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
g
: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
IP Address Dis‐
play
To prevent the IP address from being displayed on Network Info
in the Network Menu and on the LAN Standby screen, set this to
Off.
Mail menu
When this is set, you receive an email notification if a problem or warning
occurs in the projector.
List of Functions
96
s "Using the Mail Notification Function to Report Problems"p.76
SubmenuFunction
Mail Notification
Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.
SMTP Server
You can input the
IP address
g
for the SMTP server for the
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Port Number
You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.
SubmenuFunction
Address 1 Set‐
ting/Address 2
Setting/Address
3 Setting
You can input the email address of the destination to send the
notification email to. You can register up to three destinations.
You can enter up to 32 single-byte alphanumeric characters for
the email addresses.
The address for destination 1 is the mail notification sender's
address.
You can select the problems or warnings to be notified about by
email. When the selected problem or warning occurs in the
projector, an email is sent to the specified destination address
notifying that a problem or warning has occurred. You can select
multiple items from the displayed items.
List of Functions
97
Others menu
SubmenuFunction
SNMP
Set to On to monitor the projector using SNMP.
To monitor the projector, you need to install the SNMP manager
program on your computer. SNMP should be managed by a
network administrator.
The default value is Off.
Trap IP Address
1/Trap IP Ad‐
dress 2
You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
AMX Device Dis‐
covery
When you want to allow the projector to be detected by
AMX
Device Discovery
g
, set this to On. Set this to Off if you are not
connected to an environment controlled by a controller from
AMX or AMX Device Discovery.
SubmenuFunction
Crestron Room‐
View
Set this to On only when monitoring or controlling the projector
over the network using Crestron RoomView
®
. Otherwise, set
this to Off.
s "About Crestron RoomView
®
" p.80
When this is set to On, the following functions are not available.
•Web control
•Message Broadcasting (EasyMP Monitor Plug-in)
Bonjour
Set this to On when connecting to the network using Bonjour.
See Apple's Web site for more information on the Bonjour
service.
http://www.apple.com/
Message Broad‐
casting
You can switch the EPSON Message Broadcasting function to
enable or disable.
You can download Message Broadcasting and its Operation
Guide from the following Web site.
http://www.epson.com
List of Functions
98
Reset menu
Resets all of the network settings.
SubmenuFunction
Reset network
settings.
To reset all of the Network settings, select Yes.
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)"p.31
SubmenuFunction
Lamp Hours
You can display the cumulative lamp operating time
*
.
When the lamp replacement time is reached, the characters
are displayed in yellow.
Source
You can display the source name for the connected
equipment currently being projected.
Input Signal
You can display the content ofInput Signal set in the
Signal menu according to the source.
Resolution
You can display the resolution.
Video Signal
You can display the settings for Video Signal in the Signal
menu.
Refresh Rate
You can display the
refreshrate
g
.
Sync Info
You can display the image signal information.
This information may be needed if service is required.
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
List of Functions
99
SubmenuFunction
Serial Number
Displays the projector's serial number.
Event ID
Displays the application error log.
s "About Event ID"p.117
*The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
SubmenuFunction
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, all items for Network menus, Lamp Hours,
Language, Password, and User Button.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
List of Functions
100
Troubleshooting
This chapter explains how to identify problems and what to do if a problem is found.
If a problem occurs with the projector, the Help screen is displayed to assist
you by pressing the Help button. You can solve problems by answering the
questions.
a
Press the [Help] button.
The Help screen is displayed.
Using the remote controlUsing the control panel
b
Select a menu item.
Using the remote controlUsing the control panel
c
Confirm the selection.
Using the remote controlUsing the control panel
Questions and solutions are displayed as shown on the screen below.
Press the [Help] button to exit the Help.
Using the Help
102
a
See the following if the Help function does not provide a
solution to the problem.
s "Problem Solving"p.104
Using the Help
103
If you are having a problem with the projector, first check theprojector's indicators and referto "Reading the Indicators" below.
See the following if the indicators do not show clearly what the problem might be.
s "When the Indicators Provide No Help"p.107
Reading the Indicators
The projector is provided with the following three indicators that indicate the operating status of the projector.
A
Power indicatorIndicates the operating status.
Standby condition
When the [t] button is pressed in this condition, projection starts.
Preparing for network monitoring or cool down in progress
All buttons are disabled while the indicator is flashing.
Warming up
Warm-up time is about 30 seconds. After warm-up is complete, the indicator stops flashing.
The [
t
] button is disabled during warm-up.
Projecting
B
Lamp indicatorIndicates the projection lamp status.
C
Temp indicatorIndicates the internal temperature status.
Problem Solving
104
Refer to the following table to see what the indicators mean and how to remedy problems that they indicate.
If all indicators are off, check that the power cord is connected correctly and that the power is being supplied normally.
Sometimes, when the power cord is unplugged, the [
t] indicator remains lit for a short period, but this is not a fault.
: Lit : Flashing : Off : Varies according to the projector status
StatusCauseRemedy or Status
Internal ErrorStop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
sEpson Projector Contact List
Fan Error
Sensor Error
Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s
Epson Projector Contact List
High Temp Error
(Overheating)
The lamp turns off automatically and projection stops. Wait for about five minutes. After about five minutes the projector switches to standby
mode, so check the following two points.
•Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
•If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.119
s "Replacing the Air Filter" p.125
If the error continues after checking the points above, stop using the projector, remove the power plug from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
s
Epson Projector Contact List
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
s "Extended Menu" p.91
Lamp Error
Lamp Failure
Check the following two points.
•Take out the lamp and check if it is cracked.
s "Replacing the Lamp" p.121
•Clean the air filter.
s "Cleaning the Air Filter" p.119
Problem Solving
105
StatusCauseRemedy or Status
If the lamp is not cracked: Reinstall the lamp and turn on the power.
If the error continues: Replace the lamp with a new one and then turn on the power.
If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest
address provided in the Epson Projector Contact List.
sEpson Projector Contact List
If the lamp is cracked: Contact your local dealer or the nearest address provided in the Epson Projector Contact List. (Images cannot be
projected until the lamp is replaced.)
sEpson Projector Contact List
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
s "Extended Menu" p.91
Auto Iris Error
Power Err.
Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
sEpson Projector Contact List
High Temp Warning(This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
•Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
•If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.119
s "Replacing the Air Filter" p.125
Replace LampReplace it with a new lamp.
s "Replacing the Lamp" p.121
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases. Replace it with a
new lamp as soon as possible.
a
•See the following if the projector is not operating properly, even though the indicators are all showing normal.
s "When the Indicators Provide No Help"p.107
•If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
sEpson Projector Contact List
Problem Solving
106
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems Relating to Images
•No images appear
Projection does not start, the projection area is completely black,
or the projection area is completely blue.
sp.108
•Moving images are not displayed
Moving images being projected from a computer appear black
and nothing is projected, or moving images are not played back
on the computer.
sp.109
•Projection stops automaticallysp.109
•The message "Not supported" is displayedsp.109
•The message "No Signal" is displayedsp.109
•Images are fuzzy, out of focus, or distortedsp.110
•Interference or distortion appear in imagessp.111
•The image is truncated (large) or small, the aspect ratio is not
suitable, or the image has been reversed
Only part of the image is displayed, the height and width ratios
of the image are not correct, or the image may appear reversed
from top to bottom or left to right.
sp.112
•Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull.
sp.112
•Images appear darksp.113
Problems when projection starts
•The projector does not turn onsp.113
Other Problems
•No sound can be heard or the sound is faintsp.114
•The remote control does not worksp.115
•I want to change the language for messages and menussp.115
•Email is not received even if a problem occurs in the projectorsp.116
•Image file names are not displayed correctly in Slideshowsp.116
Problem Solving
107
Problems Relating to Images
No images appear
CheckRemedy
Did you press the [t] button?Press the [t] button to turn the power on.
Are the indicators switched off?The power cord is not connected correctly or power is not being supplied.
Connect the projector's power cord correctly.
s
"From Installation to Projection" p.30
Check that your electrical outlet or power source is functioning correctly.
Is A/V Mute active?Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.61
Is the A/V mute slide closed?Open the A/V mute slide.
s "Front/Top" p.11
Are the Configuration menu settings correct?Reset all of the settings.
sReset - Reset Allp.100
Is the image to be projected completely black?
(Only when projecting computer images)
Some input images, such as screen savers, may be completely black.
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
sSignal - Video Signalp.88
Is the USB cable connected correctly?
(Only when projecting USB Display)
Check that the USB cable is connected correctly. Reconnect it if it is not connected or not connected properly.
Is Windows Media Center displayed in full screen?
(Only when projecting using USB Display or network connection)
When Windows Media Center is displayed at full screen, you cannot project using USB Display or network connection.
Reduce the screen size.
Is an application using the Windows DirectX function displayed?
(Only when projecting using USB Display or network connection)
Applications using the Windows DirectX function may not display images correctly.
Problem Solving
108
Moving images are not displayed
CheckRemedy
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Are the contents of the moving image you are trying to project
copyright protected?
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Projection stops automatically
CheckRemedy
Is Sleep Mode set to On?Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
sExtended - Operation - Sleep Modep.91
The message "Not supported" is displayed
CheckRemedy
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
sSignal - Video Signalp.88
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
the computer.
s "Supported Monitor Displays" p.133
The message "No Signal" is displayed
CheckRemedy
Are the cables connected correctly?Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s
"From Installation to Projection" p.30
Problem Solving
109
CheckRemedy
Is the correct port selected?Change the image by pressing the [Source Search] button on the remote control or the control panel.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.31
Is the power for the computer or video source turned on?Turn the power on for the equipment.
Are the image signals being output to the projector?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to
change the output to an external destination as well as the computer's own monitor. For some computer models, when
the image signals are output externally, they no longer appear on the LCD monitor or accessory monitor.
If the connection is made while the power of the projector or computer is already turned on, the Fn key (Function key)
that changes the computer's image signal to external output may not work. Turn the power for the computer and the
projector off and then back on again.
s "From Installation to Projection" p.30
s Computer's documentation
Images are fuzzy, out of focus, or distorted
CheckRemedy
Is Auto V-Keystone set to Off?Setting it to On enables Auto V-Keystone.
sSettings - Keystone - H/V-Keystone - Auto V-Keystonep.90
If you are using the projector with this setting off, manually adjust the projected image.
s "Correcting manually" p.37
Is the focus adjusted correctly?Turn the focus ring to adjust the focus.
s "Correcting the Focus" p.41
Is the projector at the correct distance?Is it projecting outside of the recommended projection distance range?
Setup within the recommended range.
s "Screen Size and Projection Distance" p.130
Is the keystone adjustment value too large?Lower the projection angle to reduce the amount of keystone correction.
s "Adjusting the Image Position" p.40
Has condensation formed on the lens?If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature
changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the
projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and
wait for the condensation to disappear.
Problem Solving
110
Interference or distortion appear in images
CheckRemedy
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
sSignal - Video Signalp.88
Are the cables connected correctly?Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.23
Is an extension cable being used?If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.133
s Computer's documentation
Are the
Sync.
g
and Tracking
g
settings adjusted correctly?
(Only when projecting computer images)
Press the [Auto] button on the remote control or the [
] button on the control panel to perform automatic adjustment.
If the images are not adjusted correctly even after performing automatic adjustment, you can also make adjustments
from the Configuration menu.
sSignal - Tracking, Sync.p.88
Is the Resolution set to anything other than Auto?
(Only when projecting on a split screen)
The image may be collapsed if the Resolution on the Configuration menu and the resolution of the projected image are
not the same.
If the image is collapsed, set the Resolution to Auto.
sSignal - Resolutionp.88
Is Transfer layered window selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then clear the
Transfer layered window checkbox.
The mouse cursor flickers (only when projecting USB Display)
CheckRemedy
Is Make the movement of the mouse pointer smooth. selected?Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Make the movement of the mouse pointer smooth. (This is not available for Windows 2000.)
For Windows Vista/7, Windows Aero is disabled when this is selected.
Problem Solving
111
The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed
CheckRemedy
Is a wide panel computer image being projected?
(Only when projecting computer images)
Change the setting according to the signal for the connected equipment.
sSignal - Resolutionp.88
Is the image still being enlarged by E-Zoom?Press the [Esc] button on the remote control to cancel E-Zoom.
s "Enlarging Part of the Image (E-Zoom)" p.63
Is the image position adjusted correctly?(Only when projecting analog RGB signals input from the Computer port)
Press the [Auto] button on the remote control or the [
] button on the control panel to adjust the position.
You can also adjust the position from the Configuration menu.
s
Signal - Positionp.88
Is the computer set for dual display?
(Only when projecting computer images)
If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
s Computer video driver documentation
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.133
s
Computer's documentation
Is the projection mode correct?Depending on how the projector is installed, set the projection mode from one of the following: Front, Front/Ceiling,
Rear, or Rear/Ceiling.
sExtended - Projectionp.91
s "Installation Methods" p.20
Image colors are not right
CheckRemedy
Do the input signal settings match the signals from the connected
device?
Change the following settings according to the signal for the connected equipment.
•When the image is from a device connected to the Computer port
sSignal - Input Signalp.88
•When the image is from a device connected to the Video port
sSignal - Video Signalp.88
Is the image brightness adjusted correctly?Adjust the Brightness setting from the Configuration menu.
sImage - Brightnessp.87
Problem Solving
112
CheckRemedy
Are the cables connected correctly?Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.23
Is the
contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
sImage - Contrastp.87
Is the color adjustment set correctly?Adjust the Gamma, RGB, or RGBCMY setting from the Configuration menu.
sImage - Advancedp.87
s "Adjusting the Image" p.41
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
sImage - Color Saturation, Tintp.87
Images appear dark
CheckRemedy
Is the image brightness set correctly?Adjust the Brightness and Power Consumption settings from the Configuration menu.
sImage - Brightnessp.87
s
Settings - Power Consumptionp.90
Is the
contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
sImage - Contrastp.87
Is it time to replace the lamp?When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.121
Problems when Projection Starts
The projector does not turn on
CheckRemedy
Did you press the [t] button?Press the [t] button to turn the power on.
Problem Solving
113
CheckRemedy
Are the indicators switched off?The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
s "From Installation to Projection" p.30
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cord is touched?There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this
does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
sEpson Projector Contact List
Is the Control Panel Lock set to Full Lock?Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
sSettings - Control Panel Lockp.90
Is the correct setting for the remote receiver selected?Check the Remote Receiver from the Configuration menu.
sSettings - Remote Receiverp.90
Other Problems
No sound can be heard or the sound is faint
CheckRemedy
Check that the audio/video cable is securely attached to both the
projector and audio source.
Disconnect the cable from the Audio port, and then reconnect the cable.
Is the projector volume set to the minimum?Adjust the volume so that sound can be heard.
sSettings - Volumep.90
s
"Adjusting the Volume" p.41
Is the volume for the computer or from the image source set to the
minimum?
Adjust the volume so that sound can be heard.
Is A/V Mute active?Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.61
Is the audio cable's specification "No resistance"?When using a commercially available audio cable, make sure it is labeled "No resistance".
Is it connected with an HDMI cable?If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Problem Solving
114
CheckRemedy
Is Output audio from the projector selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Output audio from the projector.
The remote control does not work
CheckRemedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Point the remote control towards the remote receiver.
s "Remote control operating range" p.18
Is the remote control too far from the projector?The operating range for the remote control is about 6 m.
s "Remote control operating range" p.18
Is direct sunlight or strong light from fluorescent lamps shining onto
the remote receiver?
Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to
Off from Remote Receiver in the Configuration menu.
sSettings - Remote Receiverp.90
Is the correct setting for the Remote Receiver selected?Check the Remote Receiver from the Configuration menu.
sSettings - Remote Receiverp.90
Are the batteries dead or have the batteries been inserted correctly?Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.
s "Replacing the remote control batteries" p.17
When adjusting color difference using the multi-screen color
adjustment function, have you specified the correct projector ID for
the projector you want to operate?
While holding the [ID] button, press the number button that matches the ID of the projector you want to operate.
s "Setting an ID and using the remote control" p.65
I want to change the language for messages and menus
CheckRemedy
Change the Language setting.Adjust the Language setting from the Configuration menu.
sExtended - Languagep.91
Problem Solving
115
Email is not received even if a problem occurs in the projector
CheckRemedy
Is Standby Mode set to Communication On?To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
sExtended - Standby Modep.91
Did a fatal abnormality occur and the projector come to a sudden
stop?
When the projector comes to a sudden stop, email cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
sEpson Projector Contact List
Is power being supplied to the projector?Check that your electrical outlet or power source is functioning correctly.
Is the Mail Notification function set correctly in the Configuration
menu?
An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly.
s "Mail menu" p.96
Image file names are not displayed correctly in Slideshow
CheckRemedy
Is the file name too long?The file name can be up to 8 characters long. For file names longer than this, the middle of the name is
omitted to shorten the name to 8 characters.
Are there any 2-byte characters in the file name?Only alphanumeric characters and symbols can be used in file names. Any other characters are replaced with a
question mark (?).
Cannot change settingsusing a Web browser
CheckRemedy
Are the user ID and password correct?Enter "EPSONWEB" as the user ID. This cannot be changed. Enter the user ID even if the password setting is
disabled.
Enter the characters set for the Web Control Password as the password. The default password is "admin".
Problem Solving
116
Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
sEpson Projector Contact List
Event IDCauseRemedy
0432
0435
Failed to startup EasyMP Network Projection.Restart the projector.
0434
0481
0482
0485
Network communication is unstable.Check the network communication status, and reconnect after waiting for a
while.
0433Cannot play transferred images.Restart EasyMP Network Projection.
0484Communication was disconnected from the computer.
04FEEasyMP Network Projection ended unexpectedly.Check the status of network communications. Restart the projector.
04FFA system error occurred in the projector.Restart the projector.
0894Communication was disconnected because the projector connected to an
unauthorized access point.
Contact your network administrator for more information.
0898Failed to acquire DHCP.Check the DHCP server to see if it is operating correctly and check the LAN
cable to see if it is connected correctly. If you are not using DHCP, turn off the
DHCP setting.
s "Network Menu" p.93
0899Other communication errorsIf restarting the projector or EasyMP Network Projection does not solve the
problem, contact your local dealer or the nearest address provided in the Epson
Projector Contact List.
sEpson Projector Contact List
About Event ID
117
Maintenance
This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
You should clean the projector if it becomes dirty or if the quality of
projected images starts to deteriorate.
Caution
Turn off the projector's power before cleaning. Otherwise, it could cause an
electric shock.
Cleaning the Projector's Surface
Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
Cleaning the Lens
Use a commercially available cloth for cleaning glasses to gently wipe the
lens.
Warning
Do not use sprays that contain flammable gas to remove dust and lint from the
lens. The projector may catch fire due to the high internal temperature of the
lamp.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
"The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter."
Attention
•If dust collects on the air filter, it can cause the internal temperature of the
projector to rise, and this can lead to problems with operation and shorten
the optical engine's service life. Clean the air filter immediately when the
message is displayed.
•Do not rinse the air filter in water. Do not use detergents or solvents.
Cleaning
119
a
•If a message is frequently displayed, even after cleaning, it is time to
replace the air filter. Replace it with a new air filter.
s "Replacing the Air Filter" p.125
•It is recommended that you clean these parts at least once every
three months. Clean them more often than this if using the projector
in a particularly dusty environment.
Cleaning
120
This section explains how to replace the lamp and the air filter.
Replacing the Lamp
Lamp replacement period
It is time to replace the lamp when:
•The following message is displayed.
"Time to replace the lamp. Please contact your Epson projector reseller or
visit www.epson.com to purchase."
The message is displayed for 30 seconds.
•The lamp indicator flashes orange.
•The projected image gets darker or starts to deteriorate.
Replacing Consumables
121
Attention
•The lamp replacement message is set to appear after the following time
periods in order to maintain the initial brightness and quality of the projected
images.
ForEB-1960/EB-1950/EB-1940W
When using Power Consumption continually at Normal: About 2400 hours
When usingPower Consumption continually atECO: About 3900 hours
For EB-1930
When using Power Consumption continually at Normal: About 3400 hours
When usingPower Consumption continually atECO: About 4900 hours
sSettings - Power Consumptionp.90
•If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if
it is still working.
•Do not repeatedly turn off the power and immediately back on. Turning the
power on and off frequently may shorten the lamp's operating life.
•Depending on the characteristics of the lamp and the way it has been used,
the lamp may become darker or stop working before the lamp warning
message appears. You should always have a spare lamp unit ready in case it is
needed.
How to replace the lamp
The lamp can be replaced even when the projector is suspended from a
ceiling.
Warning
•When replacing the lamp because it has stopped illuminating, there is a
possibility that the lamp may be broken. If replacing the lamp of a projector
which has been installed on the ceiling, you should always assume that the
lamp is cracked, and you should stand to the side of the lamp cover, not
underneath it. Remove the lamp cover gently. Be careful when removing the
lamp cover as shards of glass may fall out and could cause an injury. If any
shards of glass get into your eyes or mouth, contact your local physician
immediately.
•Never disassemble or remodel the lamp. If a modified or disassembled lamp
is installed in the projector and used, it could cause a fire, electric shock, or
an accident.
Caution
Wait until the lamp has cooled down sufficiently before removing the lamp
cover. If the lamp is still hot, burns or other injuries may result. It takes about
one hour after the power has been turned off for the lamp to be cool enough.
a
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
b
Wait until the lamp has sufficiently cooled down, and then remove
the lamp cover at the top of the projector.
Loosen the Lamp cover fixing screw with the screwdriver supplied
with the new lamp unit or a cross-head screwdriver. Then slide the
lamp cover straight forward and lift it to remove.
Replacing Consumables
122
c
Loosen the two lamp fixing screws.
d
Take out the old Lamp by pulling the handle.
If the Lamp is cracked, replace it with a new lamp, or contact your
local dealer for further advice.
sEpson Projector Contact List
Replacing Consumables
123
e
Install the new lamp.
Insert the new Lamp along the guide rail in the correct direction so
that it fits in place, push in firmly, and once it is fully inserted
tighten the two screws.
f
Replace the lamp cover.
Replacing Consumables
124
Attention
•Make sure you install the lamp securely. If the lamp cover is removed, the
power turns off automatically as a safety precaution. If the lamp or the lamp
cover is not installed correctly, the power does not turn on.
•This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose
of it with normal waste.
Resetting the lamp hours
The projector records how long the lamp is turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing the
lamp, make sure you reset the Lamp Hours from the Configuration menu.
s
"Reset Menu"p.100
a
Only reset theLamp Hours after the lamp has been replaced.
Otherwise the lamp replacement period is not indicated correctly.
Replacing the Air Filter
Air filter replacement period
If the message is displayed frequently even though the air filter has been
cleaned, replace the air filter.
How to replace the air filter
The air filter can be replaced even when the projector is suspended from a
ceiling.
a
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
b
Open the air filter cover.
Slide the air filter cover operation knob, and open the air filter
cover.
c
Remove the air filter.
Grip the tab in the center of the air filter, and pull it straight out.
Replacing Consumables
125
d
Install the new air filter.
Press until it clicks into place.
e
Close the air filter cover.
a
Dispose of used air filters properly in accordance with your local
regulations.
Material of the frame part: Polypropylene
Material of the filter part: Polypropylene
Replacing Consumables
126
Appendix
The following optional accessories and consumables are available. Please
purchase these products as and when needed. The following list of optional
accessories and consumables is current as of: February 2012. Details of
accessories are subject to change without notice and availability may vary
depending on the country of purchase.
Optional Accessories
Interactive Unit ELPIU01
Use when operating the computer screen on the projection surface.
Document Camera ELPDC06/ELPDC11
Use when projecting images such as books, OHP documents, or slides.
Soft carrying case ELPKS65
Use this case to carry the projector by hand.
50" portable screen ELPSC32
A compact screen that can be carried easily. (AspectRatio
g
4:3)
60" portable screen ELPSC27
80" portable screen ELPSC28
100" screen ELPSC29
Portable roll-type screens. (aspect ratio 4:3)
70" portable screen ELPSC23
80" portable screen ELPSC24
90" portable screen ELPSC25
Portable roll-type screens. (aspect ratio 16:10)
53" portable screen ELPSC30
64" portable screen ELPSC31
Portable magnetic screens. (aspect ratio 4:3)
80" portable screen ELPSC26
This is a multi-aspect screen.
Computer cable ELPKC02
(1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
This is the same as the computer cable supplied with the projector.
Computer cable ELPKC09
(3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC10
(20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Use one of these longer cables if the computer cable supplied with the projector
is too short.
D port cable ELPKC22
(Mini D-Sub 15-pin/3 m for D port)
Use this when connecting to the D port on an image source.
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male
^3)
Use to connect a componentvideo
g
source.
Quick Wireless Connection USB Key ELPAP09
Use when you want to quickly establish one-to-one connection between the
projector and a computer with Windows installed.
Ceiling pipe (450 mm)
*
ELPFP13
Ceiling pipe (700 mm)
*
ELPFP14
Use when installing the projector on a high ceiling.
Ceiling mount
*
ELPMB23
Use when installing the projector on a ceiling.
*Special expertise is required to suspend the projector from a ceiling. Contact
your local dealer or the nearest address provided in the Epson Projector
Contact List.
sEpson Projector Contact List
Optional Accessories and Consumables
128
Consumables
Lamp unit ELPLP74 (EB-1930 only)
Lamp unit ELPLP75
Use as a replacement for used lamps.
Air filter ELPAF41
Use as a replacement for used air filters.
Optional Accessories and Consumables
129
Projection Distance (For EB-1960/EB-1950/
EB-1930)
A
Projection distance
B
Distance from the center of the lens to the base of the screen
(or to the top of the screen, if suspended from a ceiling)
C
Center of lens
Unit: cm
4:3 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
30"61x4683 - 136-5
40"81x61111 - 182-6
4:3 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
50"100x76140 - 229-8
60"120x91169 - 275-10
80"160x120226 - 368-13
100"200x150283 - 460-16
150"300x230426 - 692-24
200"410x300568 - 923-32
250"500x380711 - 1155-40
300"610x457854 - 1386-48
Unit: cm
16:9 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
30"66x3791 - 149+1
40"89x50122 - 199+1
50"110x62153 - 249+2
60"130x75184 - 300+2
80"180x100246 - 401+3
100"220x120308 - 502+3
150"330x190464 - 754+5
200"440x250619 - 1006+7
250"550x310775 - 1258+9
275"609x343853 - 1384+10
Screen Size and Projection Distance
130
Projection Distance (For EB-1940W)
A
Projection distance
B
Distance from the center of the lens to the base of the screen
(or to the top of the screen, if suspended from a ceiling)
C
Center of lens
Unit: cm
4:3 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
30"61x46100 - 164-1
40"81x61134 - 219-2
50"100x76169 - 275-2
4:3 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
60"120x91203 - 331-2
80"160x120271 - 442-3
100"200x150340 - 553-4
120"244x183408 - 664-5
150"300x230511 - 831-6
200"410x300682 - 1108-8
250"500x380854 - 1386-10
Unit: cm
16:9 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
30"66x3791 - 149+1
40"89x50122 - 199+1
50"110x62153 - 249+2
60"130x75184 - 300+2
80"180x100246 - 401+3
100"220x120308 - 502+3
150"330x190464 - 754+5
200"440x250619 - 1006+7
250"550x310775 - 1258+9
275"609x343853 - 1384+10
Screen Size and Projection Distance
131
Unit: cm
16:10 Screen Size
A
B
Minimum (Wide) to Maximum
(Tele)
30"64x4088 - 144-1
40"86x54118 - 193-1
50"110x67149 - 243-2
60"130x81179 - 292-2
80"170x110239 - 390-3
100"220x130300 - 488-3
150"320x200451 - 733-5
200"430x270603 - 979-7
250"540x340754 - 1224-8
280"605x377845 - 1371-9
Screen Size and Projection Distance
132
Supported Resolutions
Computer signals (analog RGB)
SignalRefresh Rate (Hz)Resolution (dots)
VGA60/72/75/85640x480
SVGA56/60/72/75/85800x600
XGA60/70/75/851024x768
WXGA601280x768
601366x768
60/75/851280x800
WXGA+60/75/851440x900
WXGA++601600x900
SXGA70/75/851152x864
60/75/851280x1024
60/75/851280x960
SXGA+60/751400x1050
WSXGA+
*1, 2
601680x1050
UXGA601600x1200
MAC13"67640x480
MAC16"75832x624
MAC19"751024x768
591024x768
SignalRefresh Rate (Hz)Resolution (dots)
MAC21"751152x870
*1
EB-1940W only
*2Only compatible when Wide is selected as theResolution from the
Configuration menu.
Even when signals other than those mentioned above are input, it is likely that the
image can be projected. However, not all functions may be supported.
Standby power consumption (Communication On): 3.8 W
Standby power consumption (Communication Off): 0.36 W
Operating: 311 W
Standby power consumption
(Communication On): 3.8 W
Standby power consumption
(Communication Off): 0.36 W
220 to 240 V area
Operating: 337 W
Standby power consumption (Communication On): 4.3 W
Standby power consumption (Communication Off): 0.44 W
Operating: 298 W
Standby power consumption
(Communication On): 4.3 W
Standby power consumption
(Communication Off): 0.44 W
Operating altitude
Altitude 0 to 2,286 m
Operating temperature
5 to +35°C (No condensation)
Storage temperature
-10 to +60°C (No condensation)
Specifications
135
Mass
Approx. 3.7 kg
ConnectorsComputer1 port1
Mini D-Sub15-pin (female)
Computer2 port1
Mini D-Sub15-pin (female)
DisplayPort1
DisplayPort
Video port1
RCA pin jack
Audio1 port1
Stereo mini jack (3.5Ф)
Audio2 port1
Stereo mini jack (3.5Ф)
Audio-L/R port1
RCA pin jack x 2 (L-R)
Audio Out port1
Stereo mini jack (3.5Ф)
Monitor Out port1
Mini D-Sub15-pin (female)
HDMI port1
HDMI (Audio is only supported by PCM)
USB(TypeA) port
*1
1
USB connector (Type A)
USB(TypeB) port1
USB connector (Type B)
LAN port1
RJ-45
RS-232C port1
Mini D-Sub 9-pin (male)
*1 Supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB.
Specifications
136
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Angle of tilt
If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
Specifications
137
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We:Epson America, Inc.
Located at:3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Tel:562-290-5254
Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue
to reflect the equipment being produced can be expected to be within the
variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR 2.909. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation.
Trade Name:EPSON
Type of Product:LCD Projector
Model:H470C/H470M/H471C/H472C/H473C/
H474C/H490C/H490M/H491C/H504C/
H505C/H506C
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio
and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outleton a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this
device and may cause interference levels which exceed the limits established
by the FCC for this equipment. It is the responsibility of the user to obtain
and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables
connected to unused interfaces. Changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate the
equipment.
Specifications
138
377
114
48.8
1593
A
Center of lens
B
Distance from center of lens to suspension bracket fixing point
271
90127
242
104
196
12
Units: mm
Appearance
139
This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications.
Ad hoc mode
A method of wireless LAN connection that communicates with wireless LAN clients without using an access point.
AMX Device Discovery
AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
See the AMX Web site for more details.
URL http://www.amx.com/
Aspect Ratio
The ratio between an image's length and its height. Screens with a horizontal:vertical ratio of 16:9, such as HDTV screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of 4:3.
Component Video
A method that separates the video signal into a luminance component (Y), and a blue minus luminance (Cb or Pb) and a red minus luminance (Cr or
Pr).
Composite video
A method that combines the video signal into a luminance component and a color component for transmission down a single cable.
Contrast
The relative brightness of the light and dark areas of an image can be increased or decreased to make text and graphics stand out more clearly, or to
make them appear softer. Adjusting this particular property of an image is called contrast adjustment.
DHCP
An abbreviation of Dynamic Host Configuration Protocol, this protocol automatically assigns an IP address
g
to equipment connected to a network.
DICOM
An acronym for Digital Imaging and Communications in Medicine. An international standard that defines image standards and a communications
protocol for medical images.
Gateway Address
This is a server (router) for communicating across a network (subnet) divided according to subnet mask
g
.
HDCP
HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to prevent illegal copying and protect copyrights by encrypting
digital signals sent over DVI and HDMI ports. Because the HDMI port and DisplayPort on this projector supports HDCP, it can project digital images
protected by HDCP technology. However, the projector may not be able to project images protected with updated or revised versions of HDCP
encryption.
HDTV
An abbreviation for High-Definition Television that refers to high-definition systems which satisfy the following conditions.
•Vertical resolution of 720p or 1080i or greater (p =
Progressive
g
, i = Interlace
g
)
•Screen
aspect ratio
g
of 16:9
Interlace
Transmits information needed to create one screen by sending every other line, starting from the top of the image and working down to the bottom.
Images are more likely to flicker because one frame is displayed every other line.
IP Address
A number to identify a computer connected to a network.
Progressive
Projects information to create one screen at a time, displaying the image for one frame. Even though the number of scan lines is the same, the amount
of flicker in images decreases because the volume of information has doubled compared with an interlace system.
Glossary
140
Refresh Rate
The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be
scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh rate and is
expressed in hertz (Hz).
SDTV
An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTV
g
High-
Definition Television.
SNMP
An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and
computers connected to a TCP/IP network.
sRGB
An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by
computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source
to sRGB.
Subnet Mask
This is a numerical value that defines the number of bits used for the network address on a divided network (subnet) from the IP address.
SVGA
A screen size standard with a resolution of 800 (horizontal) x 600 (vertical) dots.
SXGA
A screen size standard with a resolution of 1,280 (horizontal) x 1,024 (vertical) dots.
Sync.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not of
a good quality. The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is called
Synchronization. If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.
Tracking
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not of
a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking. If Tracking is not carried
out correctly, wide vertical stripes appear in the signal.
Trap IP Address
This is the IP address
g
for the destination computer used for error notification in SNMP.
VGA
A screen size standard with a resolution of 640 (horizontal) x 480 (vertical) dots.
XGA
A screen size standard with a resolution of 1,024 (horizontal) x 768 (vertical) dots.
Glossary
141
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by the
purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising
from the use of any options or any consumable products other than those designated as
Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Restriction of Use
When this product is used for applications requiring high reliability/safety such as
transportation devices related to aviation, rail, marine, automotive etc.; disaster
prevention devices; various safety devices etc; or functional/precision devices etc, you
should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because
this product was not intended for use in applications requiring extremely high
reliability/safety such as aerospace equipment, main communication equipment,
nuclear power control equipment, or medical equipment related to direct medical care
etc, please make your own judgment on this product’s suitability after a full evaluation.
About Notations
Microsoft
®
Windows
®
2000 operating system
Microsoft
®
Windows
®
XP operating system
Microsoft
®
Windows Vista
®
operating system
Microsoft
®
Windows
®
7 operating system
In this guide, the operating systems above are referred to as "Windows 98",
"Windows Me", "Windows 2000", "Windows XP", "Windows Vista", and
"Windows 7". Furthermore, the collective term Windows may be used to
refer to Windows 98, Windows Me, Windows 2000, Windows XP,
Windows Vista, and Windows 7, and multiple versions of Windows may be
referred to as, for example, Windows 98/Me/2000/XP/Vista, with the
Windows notation omitted.
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
Mac OS X 10.7.x
In this guide, the operating systems above are referred to as "Mac OS X
10.3.x", "Mac OS X 10.4.x", "Mac OS X 10.5.x", "Mac OS X 10.6.x", and
"Mac OS X 10.7.x". Furthermore, the collective term "Mac OS X" is used to
refer to them.
Trademarks and Copyrights
IBM, DOS/V, and XGA are trademarks or registered trademarks of International
Business Machines Corporation.
Mac and Mac OS are trademarks of Apple Inc.
App Store is a service mark of Apple Inc.
Microsoft, Windows, Windows Vista, PowerPoint, and Windows logo are trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
General Notes
142
The DisplayPort Certified Logo and DisplayPort Icons are Registered Trademarks of the
Video Electronics Standards Association (VESA).
The word DisplayPort is a Registered Trademark of VESA in various countries around
the world.
HDMI and High-Definition Multimedia Interface are the trademarks or registered
trademarks of HDMI Licensing LLC.
PJLink trademark is a trademark applied for registration or is already registered in
Japan, the United States of America and other countries and areas.
Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.
Product:
Spelregels forum
Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:
lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;
Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.
Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.
Abonneren
Abonneer u voor het ontvangen van emails voor uw Epson EB-1960 bij:
nieuwe vragen en antwoorden
nieuwe handleidingen
U ontvangt een email met instructies om u voor één of beide opties in te schrijven.
Ontvang uw handleiding per email
Vul uw emailadres in en ontvang de handleiding van Epson EB-1960 in de taal/talen: Engels als bijlage per email.
De handleiding is 11 mb groot.
U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.
Uw handleiding is per email verstuurd. Controleer uw email
Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.
Er is een email naar u verstuurd om uw inschrijving definitief te maken.
Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken
U heeft geen emailadres opgegeven
Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.
Uw vraag is op deze pagina toegevoegd
Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.
