656707
4
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
Model:D1301
D1301
Front Rear Audio Video
Sys
Exit
Thank you for buying this product, please read through these operating instructions,
so you will know how to operate your model properly. after you have finished reading
the instructions, put them away in a safe place for future reference .
NOTE: Due to the continuous product improvement, specifications and design are
subject to change without prior notice.
CONTENTS
IMPORTANT: Please adjust screen to make the touching effect function best when
you initiate the unit for the first time.
For the details, please refer to the operation at Page 15.
PRECAUTIONS
FRONT PANEL
BASIC OPERATION
REMOTE CONTROL
RADIO OPERATION
SYSTEM SETUP
CABLE CONNECTION
ACCESSORIES
INSTALLATION
TROUBLE SHOOTING
SPECIFICATION
MP3 OPERATION
SYSTEM MENU
BLUETOOTH OPERATION
TV OPERATION
3
5
20
16
21
DVD/VCD/CD OPERATION 28
31
39
41
44
43
43
36
7
24
27
IPOD OPERATION 38
3
PRECAUTIONS
The unit is designed for 12VDC,negative ground operation system only.
Before installing the unit, make sure your vehicle is connected to DC12V
negative ground system.
Be sure to connect the color coded leads according to the diagram.Incorrect
,
connections may cause the unit to malfunction or damage the vehicle s
electrical system.
Be sure to connect the speaker (-) leads to the speaker (-) terminal.
Never connect the left and right channel speaker cables each other or to the
vehicle body.
Make sure all the connections are completely correct before turning on your unit.
When replacing the fuse(s), the re-placement must be of the same amperage
as shown on the fuse holder.
Do not block vents or radiator panels. Blocking them will causeheat to build up
inside and mayresult in fire.
After completing the installation and beginning to play the unit (including replacing
the battery),please remove the guard against theft front-panel at first, and then
press RESET button on the base with pointed object (such as ball-point pen) to
set the unit to initial status.
IMPORTANT: Please adjust screen to make the touching effect function best
when you initiate the unit for the first time.
(For the details, please refer to the operation at Page 15.)
Notes on Installation
4
This unit can play the following discs only:
F
PRECAUTIONS
*Do not attempt to modify the unit, modifying the unit may cause an accident.
*Stop the vehicle before carrying out any operation that could interfere with your driving.
*Do not work in extremely high or low temperature. Be sure the temperature inside the
vehicle is between +60 C and -10 C before turning on your unit .
*To enjoy optimum sound and images while playing, handle the discs as follows:
Handle the disc by its edge to keep the disc clean, and do not touch the surface.
Do not use your CDs with paste residue or ink attached.
Do not use CDs with labels or stickers attached, which may leave a sticky residue
while beginning to peel off. (Shown as the picture)
Clean the discs with an optional cleaning cloth. Wipe each disc from the center out.
(Shown as the picture)
Type of disc
12cm
VIDEO
DVD
Label on the disc
Recorded material
Size of disc
Sound and moving
pictures
VCD
MP3
12cm
CD
12cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
12cm
Sound and moving
pictures
Sound only
Sound only
TM
5
FRONT PANEL
1
2
3
4
5
6
7
8
11
10
9
12
13
16
15
MENU
TILT
191818
17
IR
A/V IN
14
TA
SRC
REL
DN
UP
VOL
A/V IN
PTY AF OPEN
BAND/
IR
POWER
MIC
DISP
MUTE
6
1.REL:Press to open the guardagainst theft front-panel.
2.VOL:Rotate VOL button clock wiseto increase the volume level; and rotate VOL
button anticlockwise to decreasethe volume level.
Press the button to select one of the audio control:L-front/R-front/L-rear/R-rear/Subwoof
/Bass/Middle/Treble/TILT/Volume.
Rotate the button to adjust the selecteditem
3. / / / :In radio mode, long press switches to manual seek station .
Short press switches to automatic.
In playback mode, short press to select previous or next track or chapter.
Long press will perform fast reverse or fast forward.
4. /BAND: Press to pause or play playback mode.
In radio mode, press to change current band.
5.SRC: Press to switch sources.
6.POWER/MUTE:Press to turn on the unit, press and hold the button for 1 second or longer to
turn off the unit. In power on, press to shut off the sound output, press it again to resume
previous sound.
7.A/V IN: Insert the A/V cord, then press PWR/SRC button to selectAUX1 source.
8.SD slot: Insert SD card, the unit will play the files of SD card automatically.
NOTE: Once the SD card could not eject automatically after pressing, just pull it out manually .
9.USB slot: Insert USB device, the unit will play the files of USB automatically.
10. IR window
11. :Short press to eject a disc.
12. OPEN: Press to open or close the TFT panel.
13. DISP/AF: in radio mode, press to turn the AF function on/offpress and hold to display
the current time ,source of the front and rear display and media (Disc,USB,SD)available.
14. MIC
15. TA: In radio mode, press to turn the TA function on /off
16. PTY: press to switch PTY program type
17. RESET: press to return to the initialization
18. / (TILT):Press to set the angle of TFT panel.
19. MENU:In DVD mode, press to display DVD SETUP menu;
Long press or press in other mode to display SYSTEM SETUP menu.
7
FRONT PANEL
SYSTEM MENU
The users can perform operationby touching screen directly.
Radio Operation
1. BACKLIGHT
Turn on /off the backlight.
(The function can be used to change the screen brightness while travelling at night)
2. SOURCE
To display the SOURCE screen
3.Station preset button
To display the preset station list
(touch one of the station preset button to recall the radio which stored on the position;
long touch to save the current frequency into the station)
4.BAND
To switch bands.
5.LOC
To select strong or weak stations reception
6.EQ
To select a preset equalizer mode.
7.LOUD
To switch LOUD control function on/off
8.PAGE 1
To switch to RDS operation page.(Refer to RDS Opetation for detail)
9.SEEK-/SEEK+
To seek a station automatically,
To seek a station manually(long touch).
10.AMS
To browse preset stations.
To search and store stations automatically(long touch).
8
Page1
1
6
7
4
5
9
10
8
3
2
1: 65.00M 2: 67.10M
4: 72.50M
6: 65.00M5: 74.00M
3: 70.40M
65.00MHz
RDS Operation
EON:OFF REG:OFF
PTY:NONE
RT:
PS:
PTY:
65.00MHz
TA AF
PTY
Page2
Seek-
Seek+
1
2
3
4
5
1.TA
To turn on /off TA function
2.AF
To turn on /off AF function
3.PTY
To switch RDS program type
4.Page2
To switch to radio operation page.
5.SEEK-/SEEK+
To seek a station automatically.
To seek a station manually(long touch).
EON(Enhanced Other Networks)
ON: Active the EON function, the receiver automatically tunes in the station that broadcasts
the traffic information when it occurs, After broadcasted ,the unit will automatically return
to the original source play before the traffic information broadcast began.
OFF: Deactive the EON function
REG(Regional)
ON: Active the REG function, the unit automatically keeps receiving the related RDS
station.
OFF: Deactive the REG function
In DVD mode, the touching screen display as following after touching at random position.
Multi-- Player Operation
PLAY
PAUSE
STOP
PREV NEXT
MENU
4
1
2
5
3
9
Bluetooth Operation
Hands-free phone Operation
1
2
3
4
6
7
8
9
5
1.
to display the Bluetooth main screen
2.
To display the phone book screen
3.
To display the Bluetooth steup screen
4.
To display the source selection screen
5.dial number list
6.
To dial a call
7.
To clear the inputted telephone number
8.
To hang up a call
9.
To transfer calling audio output mode
1.PLAY
To start the playback.
2.PAUSE
To pause the playback.
3.STOP
To stop playing, touch twice to stop
5.PREV/NEXT
To select previous/next chapter or tracks.
completely.
4.MENU
To display the DVD SETUP screen.
7
NOTE:Touching the left middle position twice to display the TITLE MENU selection screen,
touching the right middle position twice to display the ROOT MENU selection screen, ouching
the right top position to display the number keyboard. You can select chapter(track) by
pressing the touchable screen or the RC.
10
8
The touching button(from5 to 7) are available if the A2PD function is activated
1.
To display a telephone number list of the received calls
2.
To display a telephone number list of the
3.
To display a telephone number list of the received but you missed
4.
To change the list page
dialed calls
1.
To connect the Bluetooth deviece
2.
to pair up the Bluetooth device.
3.
To disconnect the Bluetooth device
4.
To reset the unit if there is something wrong with the Bluetooth function.
5.
Playback/pause
6.
To stop playback
7.
To find the begin of the last or next track
8.
To adjust the volume
1
2
3
4
5
6
7
8
The Bluetooth Setup screen
The phone book screen
4
1
3
2
11
9
Setup Operation
TOUCH ON THE TOP LEFT POSITION TO ENTER SOURCE INTERFACE.
The unit will return to previous mode display screen if any operation is not perform in 5 s.
1.channel preset button
To display the preset channel list
Touch any one of the list to watch the TV which stored on the position
Touch and hold any one of the list to stored the current channel frequency on the position
2.CH-/CH+
To switch the preset channel list downward or upward.
3.AMS
To search and store channels automatically
4.PAL-I
To switch output system
5.Ant-1
To switch the receiving antenna
6.SYS
To display the system setup screen.
7.SEEK-/SEEK+
To seek a channel automatically
To seek a channel manually(long touch)
TV Operation
TV
0: 44.25 1: 55.75
2: 63.75
4: 44.25
3: 77.25
5: 115.25
PAL-I
Ant-1 CH:0
44.25Mz
CH- CH+
AMS
SYS
Seek-
Seek+
1
2
3
7
6
4
5
6
5
4
1
2
3
Front Rear Audio Video
Sys
Exit
12
Front Rear Audio Video
Sys
Exit
10
*
* If another monitor(rear)is connected to the unit,image/audio of the rear
monitor can be changed from the unit,so you can enjoy separate image/audio
in the rear seats.
* The unit will output corresponding source sound through REAR-VIDEO-OUT
or DUAL-AUDIO-OUT
It is unavailable in AUX or TV mode.
1.Front
To display the source selection screen.
Touch the item to select source displayed on the unit screen.
2.Rear
To select a source which display on the rear monitor
3.Audio
Touch on the AUDIO button and the screen will display as following:
Volume
L-front
R-front
Front
Rear
Audio
Video
SYS
Exit
In this menu, there are items of Volume, L-front,R-fornt, L-rear, R-rear , Subwoof, Bass,
Middle and Treble can be adjusted. Touch on the button to adjust each item and
touch on button to turn pages and select the item listed above.
Front Rear Audio Video
Sys
Exit
13
Front
Rear
Audio
Video
SYS
Bass freq
Middle freq
Treble freq
Exit
11
4.Video
Press on the VIDEO button and the screen will display as following:
Front
Rear
Audio
Video
SYS
Exit
Bright
HUE
Contrast
Sharp
In this menu, there are items of Bright, Hue, Contrast, Sharp can be adjusted.
Touch on the item that need adjusted then touch on the button to adjust.
5.SYSTEM
To display the system setup screen.Refer to system setup operation for detail
6.EXIT
To return to current source screen.
Key Beep
Turn on/off the sound guide function
ON:activate the sound guide mode
OFF:deactivate the sound guide mode.
The sound guide beep will not be produced when a button on the unit is pressed.
Local Area
Touch the provided option to change the radio frequency for different country.
SYSTEM SETUP OPERATION
Clock Sys
Set the time display mode(12H/24H)
Exit
Switch page button
Front
Rear
Audio
Video
Sys
Clock Adjust
Night Lum
Touch Adjust
Front
Rear
Audio
Video
SYS
Exit
Clock Sys
Key Beep
Local Area
Touch the provided option to adjust the bass freq middle freq treble freq.
14
12
Front Rear Audio Video
SYS
Subwoof freq
BassQ factor
MidQ factor
Exit
Touch the provided option to change the subwoof ,the bass and middle quality factor.
Front
Rear
Audio
Video
Sys
Clock Adjust
Night Lum
Touch Adjust
Exit
Clock Adjust
Adjust the time by touch
To select item your want to set(hour minute second)
To change the display number
Night Lum (dimmer)--in half-night mode
The function to select the backlight brightness.(normal status's 20%,40%,60%,80% )
Touch Adjust
When the display position on the screen and the touch position on the touch panel not
match, or using the product at first time, the adjustment becomes necessary.
Accurately touch the mark provided in the screen for more than 2 seconds until the
adjust succeed is displayed .
X < - press it
15
REMOTE CONTROL
1.PWR/ 2. EQ/ 3. ANGLE/AMS 4. SUB-T/LOC
5. PROG/A-B 6. OSD/ 7. GOTO/ 8. MENU
9. 10. RPT 11.
12. ZOOM/AF 13.
[ / ][ / ][ / / / ]/ENTER /PTY
SRC/IR-SW 14. VOL-/SEL/VOL+ 15.
16. LOUD/ 17. 0-9 Number button 18. CLEAR 19. 20. TITLE
21. 22. BAND/P/N 23. SETUP 24. AUDIO/ST 25. RDM/TA
1
15
16
19
20
18
17
21
22
23
2
4
6
5
14
8
9
10
3
12
11
24
25
13
7
PTY
AF
TA
16
15
REMOTE CONTROL
Installing the battery
Slide the tray out on the back of the remote control and insert the battery with the plus
(+)and minus(-)poles pointing in the proper direction.
Use and care of the remote control
Point the remote control in the direction of the front panel to operate to use it.
Notes:
Using batteries improperly can cause them to explode. Take note of the following points:
* Keep the battery out of the reach of children. Should the battery be swallowed,
immediately consult a doctor.
* Use one CR2025(3V)lithium battery.
* Remove the battery if the remote control is not to be used for a month or longer.
* Do not short-circuit, disassemble or heat batteries.
* Do not dispose of batteries into fire or flames.
* Dispose of spent batteries properly.
* Do not let the remote control fall onto the floor, where it may become jammed under the
brake or accelerator pedals.
17
REMOTE CONTROL
16
1 POWER/
ress to mute the device. Press it again to resume previous sound level.
2 EQ/
Press to select the corresponding preset modes to adjust the sound quality.
In bluetooth mode, press this button to dial up a call.
3 ANGLE/AMS
Press to change the viewing angle in DVD mode;
4 SUB-T/LOC
In DVD playback mode, press to change the subtitle language;In radio mode, press to
select strong or weak station reception.
5 PROG/A-B
In DVD/VCD/CD mode, press to set the program order to play;In mode, press
and hold to play the section of selected chapter/track repeatedly .
6 OSD/
In playback mode, press to display the playback information;
7 GOTO/ #
In DVD mode, press the button and the cursor button to select TITLE CHAPTER
REPEAT TIME DISP.Then press
ENTER button to set the value.
In VCD mode, press GOTO button and cursor button to select TRACK DISC TIME
TRACK TIME REPEAT TIME DISP.Then press ENTER button to set.
8 MENU
9 [ / ][ / ][ / / / ]/ENTER
In playback mode perform [fast reverse/fast forward][previous track/next track]
[upwards/downwards/leftwards/rightwards]; press ENTER to validate.
10 RPT
In playback mode, press to select a repeat mode.
Press the button to turn on the unit;Press and hold for 1second or longer to turn off the
unit. In power on,p
In radio mode, press to browse each
stored station .Long press to scan and store station automatically.
In TV mode, long press the button to scan and store channel automatically, press it again
to stop scanning.
In other mode, press to
display the current time, the set source output through the front and rear display, the
current available drive.(Disc/SD/USB);In bluetooth mode, press to function as button
on your mobile phone functions .
AUDIO SUBTITLE ANGLE TT TIME CH TIME
In CD/MP3 mode, press GOTO button to select "Disc Go To:_ _ _" "Track Go To _:_ _:_ _"
"Select Track:_ _:xx". Then press 0-9 number buttons to set the track you want.
In bluetooth mode, press this button to function as # button on your mobile phone
functions .
In radio mode ,press the button and the number button to set the frequency.
In TV mode ,press the button and the number button to select a channel
playback
Press to return to the root menu in DVD mode.
In radio mode,press to switch between radio main screen and RDS screen.
18
17
11 /PTY
In radio mode, press this button to switch to RDS program type.
In DVD/VCD mode, press to play slowly
12 ZOOM/AF
In radio mode, press this button to function AF on/off.
In DVD/VCD mode, press to increase or decrease the picture in size.
13 SRC/IR-SW
P Press and hold this button to
14 VOL-/SEL/VOL+
Press VOL-/VOL+ to adjust volume.
15
Press to eject a disc
16 LOUD/
Press this button to activate LOUD function.
In bluetooth mode, press this button to hand down your calling.
17 (0-9)NUMBER BUTTON
In radio(TV) mode,
In DVD/VCD/CD mode,press to select any chapter or track directly.
In bluetooth mode ,press to input the telephone number.
18 CLEAR
19
Press to pause playing and press again to resume playing.
20 TITLE
22 BAND/P/N
In radio mode,press to select bands.
In DVD/VCD mode,press P/N button to select PAL AUTO or NTSC.
23 SETUP
In playback mode, short press to display DVD setting, long press in DVD mode and
press in other modes will display system settings.
24 AUDIO/ST
In DVD mode, press to change the audio language.
In VCD mode ,press to change the channel mode.
In radio mode, press to select stereo or mono reception.
25 RDM/TA
In radio mode, press this button to function TA o/off.
In playback mode, press to play tracks in a random order.
ress the button repeatedly to switch sources. change
the IR to control front or rear source.(*It is disable when rear source shut off.)
Then press VOL+/- to adjust each item.
press the number button to select a corresponding preset station
(channel)
Press the button to clear the erroneous number what you import.
In DVD mode, press the button to return the title menu.
In VCD mode, press this button to turn on/off PBC function.
21
Press to stop playback.
Press SEL to select one of the control item:L-front/R-front/L-rear/R-rear/Subwoof/Bass/
Middle/Treble/Angle/Volume.
19
18
ROCK
POP
CLASSIC
EQ OFF
¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ
1.Reset the Unit
Operating the unit for the first time or after replacing the car battery, you must reset the u
nit. Press RESET button on the head unit with a pointed object, (such as a ballpoint
pen) to set the unit to initial status.
*This function can only be operated by the head unit.
2.Turning the Unit On/Off
Press PWR/ button on the remote control to turn on the unit. N unit ON, when insert
a disc, the unit will automatically start playing. Long press it to turn off the unit completely.
Pressing POWER/MUTE button on the front panel also performs the same operation.
Note:
After the unit is off, the volume level is memorized during the area between 0 and 30.
If it is set less than 6, it will resume to 6; if the set volume level is higher than 30,
it will resume to 30; if it is between 6 and 30, it still stores in the status which you set.
3.Volume Control
Press VOL+ button on the remote control to increase the sound level and press VOL-
button on the remote control to decrease the sound level.
Press (VOL+ or VOL-) on the front panel also performs the same operation.
4.Setting the Sound Characteristics
Repeatedly press SEL button or press SEL button on the remote control to select the
desired mode in the following order:
Note:
* After selecting the desired mode, you can adjust the current level by press the-/+ button
or pressing VOL-/VOL+ buttons on the remote control.
,
* If you don t adjust VOL button in 3 seconds after selecting the desired mode, the
function will be cancel.
5.Mute Function
6.EQ Setting
While listening to the popular music, classic music or rock music, you can select the
corresponding preset modes to adjust the sound quality perfectly by using EQ button on
the remote control. Repeatedly pressing EQ button to choose the following modes in turn:
after adjusting the Angle item, the unit will memorize the angle of the panel.
Press PWR/ button to shut off the sound output. MUTE will be displayed on the
screen Press it again to resume to previous volume level.
Press PWR/MUTE button on the panel also performs the same operation.
BASIC OPERATION
Volume
Subwoof
Angle
L-front R-front
L-rear R-rear
Bass Middle
Treble
20
Page1
1: 65.00M 2: 67.10M
4: 72.50M
6: 65.00M5: 74.00M
3: 70.40M
65.00MHz
19
FM2
MW2 MW1
FM3
FM1
5.DX/LOC Selector
In radio mode, press LOC button on the remote control to select strong or weak station
reception.
(1). It is set to LOC mode when LOC button is first pressed. Loc:ON appears on the
screen and only strong signal station will be tuned.
1.Band Selector
In radio mode, repeatedly press BAND button on the remote control to select a band in
the following order:
Selecting the radio mode,the TFT display as the follow:
*Pressing BAND on the touchable screen or on the panel also performs the same operation.
3.Recalling a preset station
A total of 30preset stations (18-FM,12-MW) are available in memory.
Press / button on the remote control to recall a preset station.
The display shows the preset number and frequency of the stored station, touch one of
these to select a corresponding station to listening
*Press any one of the station preset button on the remote control also selects preset station.
4.Automatic/Manual Store
Auto store is a function for storing up to 6 stations.
(1)select the desired band
(2)hold down AMS button ,the stations with good reception are stored automatically.
Manual store: turn in a station you wish to store in the preset memory, press and hold
any one the preset buttons (1-6) that you want to store on.
*If you store a station in a preset memory which already has a station the current station
will be cleared and replaced with the new station.
2.Manual/Automatic Tuning
(1).Automatic Tuning: Press / button on the remote control to search for a station in
the direction of lower frequency or higher frequency.
(2). Manual Tuning: Press and hold or button repeatedly to move downward or upward
one step respectively until the desired station frequency is displayed.
*Press(press and hold) / button on panel also performs the operation
RADIO OPERATION
21
20
RDS (RADIO DATA SYSTEM) OPERATION
The RDS allows you to receive a variety of information such as traffic information,
station names, and to automatically retune to a stronger transmitter that is
broadcasting the same programme.
Tips
The RDS digital data includes the followings:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
Turn on/off the AF function
* Press AF button to switch on/off AF function
*the tuner will search for a station with RDS information
* The tuner will retune frequencies whenever the reception signals getting worse.
Receiving Traffic information
1.Press the TA button to switch on TA mode.
2.The unit search for traffic information station automatically.when a traffic information
station is tuned in,the TP mark display on touchable screen.If you do not want to listen to
the traffic information being received,press TA button to skip that traffic information messa-
ge.the TA function will remain in the ON position.and the unit will be back to previous mode.
3.Press it again to switch off TA mode.
* Traffic information is heard only when it is being broadcast.
In other mode,Traffic announcement can interrupt the source sound output when broadcast.
After broadcasted ,the unit will automatically return to the original source play before the
traffic information broadcast began.
(2).It is switched to DX mode when Loc: OFF is pressed again. Both strong and weak
stations can be received.
Note:
* The initial mode is DX mode.
6.MO/ST Selector
In FM of radio mode, you can press ST button on the remote control to select Mono mode
or Stereo mode.
22
21
EON:OFF REG:OFF
PTY:NONE
RT:
PS:
PTY:
65.00MHz
TA AF
PTY
Page2
Seek-
Seek+
PTY(Programme Type)Tuning
The PTY function allows you to search for stations with a particular Program Type.
Touching Page1 button on the radio display screen to switch to the RDS screen
1.Press PTY button on touchable screen or on the remote control to select a programme
type. After selecting the programme type for 3 seconds, the unit will search for a station I
n the selected programme type.
*If the PTY station is found,the tuner will be stop searching.
*If the PTY station is not found, No Pty will be display on the screen.
All types for your selection are listed in table as below:
NEWS
CURRENT AFFAIR
INFORMATION
SPORTS
EDUCATION
DRAMA
CULTU RE
SCIENCE
VARIED
ROCK MUSIC
M.O.R. MUSIC
LIGHT CLASSIC
SERIOUS CLASSIC
OTHER MUSIC
WEATHER
FINANCE
CHILDREN
SOCIAL AFFAIR
PHONE IN
TRAVEL
LEISURE
JAZZ MUSIC
COUNTRY
NATIONAL
OLDIES
FOLK
POP MUSIC
RELIGION
DOCUMENTARY
TEST
ALARM
An emergency broadcasting(ALARM) will broadcast automatically and produce the
beep sound when it is received. The sound output through other source will be muted.
23
BLUETOOTH OPERATION
selecting B Tmode
Selectting bluetooth device
(EONON) by using mobile phone
Input a pass code:1234
The connection is made
The screen display CONNECTED
CONNECTING
The unit is compatible with Bluetooth international standard wireless cummunication
technology.You can place a hands-free call by using a Bluetooth compatible with the
mobile phone.
*When you place a call,speak loudly and clearly.
*Shut the windows before calling.
*It is normal that some unnatural voice may be heard during your calling which may be
caused by the conditions of the signals or the one who use the mobile phone.
*Due to some special mobile phone,you may not be able to use a hands-free phone.
HANDS-FREE PHONE
Press PAIR button on touchable screen
to turn on the par function
Searching for device(EONON) by using
mobile phone
,
*The Bluetooth setting is required for a mobile phone. Read the Owner s Manual of the
mobile phone.
*After paired ,the unit can connect with the mobile phone automatically. in valid range
* If the mobile phone and the device are disconnected accidentally, the screen will display
Disconnect, just press LINK buttonon the screen to reconnect(refer to Bluethooth setup ).
24
23
Receiving a Call
When a call is received, a received call sound rings ,and the coming call is announced in
the display. Press button on the screen to starts the call.
Hanging up a Call
Press button on the screen to finishes the call.
*Press / button on the remote control also perform dial(receiving) a call or hang up a
call function
*The incoming call will interrupt the sound output through other source, and switch to the
hands-free phone screen automatically when it is received.
After the call is over, the unit will be back to previous mode.
* The hands-free phone sounds output through the built-in speakers. When calling, press
Audio Transfer button on the screen to switch the mode to receive a call by using mobile
phone, and press it again to return to hands-free mode.
2.Placing a call by history:
Press button to switch to PHONE BOOK screen. You can place a call by selecting
a person from a list of received calls dialed calls or missed calls.
A maximum of 16 numbers can be stored in each call history. a maximum of 4 numbers
be display in each page, and touch button to turn to next page.
Dialling a call
1.
screen
Input the number required by pressing number button on the remote control or on the
screen then press button on the screen to dial up.
The telephone number you dialed is appeared on the
25
24
BLUETOOTH AUDIO FUNCTION
Refer to CONNECT to connect bluetooth audio devices.
Refer to bluetooth setup(PAGE6) for operation
*video playback is not supported.
*using remote control also perform same operation
The key of the remote control assigned in Bluetooth audio function
Previous/next track
Stop playback
Play/pause
Audio information of a bluetooth compatible mobile phone,portable player,etc.,
Is by wireless controllable/playable from the unit.
26
Selecting mode
Press SRC button on the remote control, on the panel or source selection touch-
able screen to select TV mode.
Searching a channel
Automatic tuning:
Press / buttons on the panel, or / buttons on the remote control or SEEK-/SEEK+
buttons on the touchable screen to start auto searching the channel downward or upward.
Manual tuning:
Press and hold repeatedly / buttons on the panel, / buttons on the remote control
or SEEK+/SEEK- buttons on the touchable screen to start manual searching the channel
downward or upward.
.
TV OPERATIONS
TV
4: 44.25
5: 115.25
To Store a station automatically
Press and hold AMS button on the remote control or press AMS on the touchable screen .
The unit will search for channels and store them under preset numbers in order of signal
strength.
TV
0: 44.25 1: 55.75
2: 63.75
4: 44.25
3: 77.25
5: 115.25
PAL-I
Ant-1 CH:0
44.25Mz
CH- CH+
AMS
SYS
Seek-
Seek+
Selecting channel
1.Press / on the remote control to select previous or next stored channel.
2.You can Press(1-9) number button directly on the remote control to select preset
channel. To select more than 10 channel number, firstly press GOTO button, then press
the corresponding number buttons.
3. Press the needed channel number on the touchable screen. To select a page containing
the needed channel number, press CH-/CH+ buttons on the screen.
Selecting TV system
Press repeatedly PAL-I button on the touchable screen to change the TV system for
different country.
Note:
When the TV channel picture is being broadcasted, touch the screen to
return to the TV mode menu. The TV mode menu will be concealed when
any operation is not performed within 5seconds.
27
Loading a disc
1.Press button to open the front panel
2. Insert a disc into the Disc slot the unit switch to the DVD mode automatically
* You can eject a disc by pressing button on the unit
DVD OPERATIONS/VCD/CD
26
Repeat Playing
In playback mode, press RPT on the remote control to perform replaying function when
you need to repeat the chapter you like.
During DVD playback, the replay option change in following order:
During VCD /CD playback, the replay option change in following order
*The default setting is disc repeat
Playing Tracks in Random Order
During DVD/VCD/CD playback, press RDM button, RANDOM will appear on the
display, the unit plays any track at random and the number selection is de-available.
Press it again to return to normal playing.
TRACK
OFF
CHAPTER
OFF
TITLE
1 2
1 4
1 8
1 16
1 2
1 4 1 8 1 16
Quick track selection fast forward/fast reward playback
During playback mode, press / button to select next/previous chapter or track.
*Press / button on the unit also perform the same operation.
Press the / button on the remote control to perform fast reward or fast forward.
Repeatedly press the button ,the options switch as follows order:
*Press the / button on the unit for long time will perform the same function.
Stop the playback
Press button to stop playing,then press ENTER button to play the current chapter or
track, press button twice to stop playing completely,then press ENTER button to play
the beginning of disc.
32
Pause the Playback
Press button to pause the playback,press it again to return to normal playback.
*Pressing button on the front panel also perform the same operation.
Slow motion playback
.
In DVD mode, press repeatedly to slow forward or slow reward, as follows:
repeatedly In VCD mode,press to slow forward in following order
28
27
Notes:
* This function only operates with DVDs featuring multi-subtitle recordings.
* This function is operated by using the remote control.
Changing the audio language
DVDs can provide audio playback with different language. With DVDs featuring multiaudio
recordings, you can press AUDIO button to switch between language and audio systems
during playback. Selection options switch as follows:
Notes:
* This function only operates with DVDs featuring multi-audio recordings.
* This function is operated by using the remote control.
Subtitles 2
Subtitles OFF
Audio 01
Audio 02
Programmed playback
In DVD/VCD/CD mode, press the PROG button and the program menu will be displayed.
Press the number buttons to select the track number. Use the direction buttons to move
the cursor to START and press ENTER to start programmed playback. Move the cursor
to EXIT and press ENTER to exit the programmed playback. Move the cursor to PREV
and press ENTER to go to the last page; move the cursor to NEXT and press ENTER to
go to the next page. During this process, press PROG to cancel the programmed playback.
* This function can only be operated by using the remote control.
Changing the subtitle language(Multi-subtitle)
With DVDs featuring multi-subtitle recordings. You can press SUB-T to switch between
subtitle languages during playback.
Selection options switch as follows:
Subtitle 01
4X
X3
1 2
1 3
1 4
2X
OFF
*This function is operated by using the remote control.
Selecting the channel mode
In VCD mode, press the AUDIO button on the remote control repeatedly to select the
channel mode in the following order:
(VCD mode)
Increase or decrease the size of the picture
During DVD/VCD playback, press ZOOM button to increase or decrease the picture size.
There are 6 sizes, and press the button repeatedly to change the size in following order
MONO LEFT
STEREO
MONO RIGHT
MIX-MONO
This function is operated by using the remote control.
Normal Play
1 2
1 4
1 8
1 16
29
Selecting root menu(DVD mode)
For DVD disc, you can press MENU to select different root menus, and then press
[ENTER] buttons to enter the sub-menus. With pressing
buttons, and the number buttons, and then ENTER button to select and enter what
you desired.
Setup menu
In DVD/VCD/CDmode, press SETUP,the screen will display system setting picture,
the user can select some relative constant parameters. The user also can set it as
needed by moving the cursor and using buttons, and then press ENTER
to execute the selecting or entering item.
*This function is operated by using the remote control.
Notes:
* The selections are the preferred options that will be chosen if they are available on a
disc. If the disc that is inserted does not have the preferred option then the discs own
preference will be used.
* Regarding SETUP MENU, please refer to the following pages for more details.
* Some functions varies depending on the types of models or formats of the disc.
Auto switch to video
When playing DVD in driving car,there is
display on screen. Just braking car, the screen can switch to video automatically.
,
Attention: Cann t use function When driving
Selecting different title (DVD mode)
For DVD disc, you can press TITLE on the remote control to return the top menu of the
disc, and you can select different chapter or title upward or downward by using
or .
*Touching the screen also perform the same function(refer to page 7 Multi-player
operation for detail).
Auto switch when revering the car
The unit can switch to the radar of revering the car automatically,when revering the car.
30
When you press SETUP button on the remote control,or press SETUP button on the screen, the setup menu
will be displayed. It include General Setting,Audio Setup,Preference ,Password Setup and Exit Setup menu.
1.Within the setup menu, you can use [ ][ ][ ][ ] buttons on the remote control to move the cursor,
and then press the ENTER button to make your selection.Press [ ] can return to the previous menu.
2.To exit setup menu, you can select the EXIT item in sub-menu or press SETUP button.
SYSTEM SETUP
The TV Display which select the different ratio of display format and the screen of TV, There are
various types of display on screen for different matches between Disc and TV
Note:
No matter which display format is selected, a picture recorded in standard 4:3 format always displays in
the 4:3 aspect ratio.
The display format of DVD titles may vary; please refer to the information that accompanies your specific
DVD title.
If the DVD title is recorded in 16:9 wide display format while the TV is a standard 4:3 screen, horizontal
compression of the image will result.
1.1 TV DISPLAY
1. GENERAL SETUP PAGE
GENERAL SETUP PAGE
SET TV DISPLAY MODE
4:3 PAN SCAN
4:3 LETTER BOX
16:9 WIDE
TV DISPLAY
OSD LANGUAGE
WIDE
ENG
On Screen Display(OSD)Language:Users can select the on-screen display language.
Some DVD titles may be recorded in special formats. In such cases, the DVD titles will always appear on
the screen in their original format,regardless of which TV display format you select.
1.2 OSD LANGUAGE
GENERAL SETUP PAGE
SET OSD LANGUAGE
ENGLISH
GERMANY
TV DISPLAY
OSD LANGUAGE
WIDE
ENG
Note:touching the item on the screen also performs same operation.
31
2.1 DIGITAL OUTPUT SETUP
DIGITAL AUDIO PAGE
OFF
48KHz
SPDIF OFF
SPDIF RAW
SPDIF PCM
SETUP SPDIF
DIGITAL OUTPUT
LPCM OUTPUT
AUDIO SETUP PAGE
GO TO AUDIO SETUP PAGE
DIGITAL AUDIO
DOLBY DIGITAL SETUP
- SPDIF OFF:An analog surround sound format is output through the back-panel connections for
L,R,LS,RS and centre speakers,and the subwoofer simulation
-SPDIF RAW:outputs the analog surround sound format and digital audio signal
-SPDIF PCM :outputs the digital audio signal only.
User can select digital audio setup or dolby digital setup.
2.1 DOLBY DIGITAL SETUP
DOLBY DIGITAL SETUP PAGE
STR
STEREO
L-MONO
R-MONO
MIX-MONO
DUAL MONO(1+1) SETUP
DUAL MONO
DYNAMIC
DUAL MONO:User can switch the binaural mode
DYNAMIC:Select the provided option to change the Dynamic range setting.
The preference setting is active only when disc has been stopped completely, and the setting is
effective on next time power on till exchanging the saved setting.
3. PREFERENCE SETUP PAGE
3.1 AUDIO
AUDIO: Sets the preferred audio language as the default when playing DVD. (If DVD support these
languages)
32
2. AUDIO SETUP PAGE
3.2 SUBTITLE
SUBTITLE: Sets the preferred subtitle language as the default when playing DVD.(if DVD support
these languages)
3.3 DISC MENU
DISC MENU: Sets the preferred menu language as the default when playing DVD.(if DVD support
these languages)
3.4 PARENTAL
PARENTAL: The parental control function works in conjunction with the different censorship classes
assigned to DVDs. These classes help to control the types of DVDs that the family watches, There
are up to 8 censorship classes for DVDs.
Note:
The PARENTAL is changeable when 4.1 PASSWORD MODE set to OFF.
After setting the level of parental control. please set the password as ON to perform the lock of changing.
PREFERENCE PAGE
1.KID SAF
2.G
3.PG
4.PG 13
5.PG R
6.R
7.NC 17
8.ADULT
SET PARENTAL CONTROL
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENG
ENG
ENG
PREFERENCE PAGE
PREFERRED SUBTITLE LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENG
ENG
ENG
ENGLISH
FRENCH
SPANISH
PORTUGUES
JAPANESE
KOREAN
RUSSIAN
THAI
PREFERENCE PAGE
PREFERRED MENU LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENG
ENG
ENG
ENGLISH
FRENCH
SPANISH
PORTUGUES
JAPANESE
KOREAN
RUSSIAN
THAI
PREFERENCE PAGE
ENGLISH
FRENCH
SPANISH
PORTUGUES
JAPANESE
KOREAN
RUSSIAN
THAI
PREFERRED AUDIO LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENG
ENG
ENG
3.5 DEFAULT
DEFAULT: Resets to the initial factory setups.Press ENTER button to confirm
33
32
PREFERENCE PAGE
RESET
LOAD FACTORY SETTING
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENG
ENG
ENG
4.1 PASSWORD MODE
PASSWORD MODE: Sets the function operation to locking the parental function
ON:Using the parental control must input the password
OFF:You can not input the password to change the parental control.
* The initial password is 136900
4. PASSWORD SETUP PAGE
PASSWORD SETUP PAGE
PASSWORD MODE
PASSWORD
ON
ON
OFF
PASSWORD MODE
4.2 PASSWORD CHANGE
PASSWORD CHANGE: You can change the password, please type 6 numerals as new password.
PASSWORD SETUP PAGE
ON
CHANGE
CHANGE PASSWORD
PASSWORD MODE
PASSWORD
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
Note:Touching the position where inputting password,the screen will display the number button,and
user can input the password by touching number button
5. EXIT SETUP MENU
EXIT SETUP MENU
Moving the cursor to by using direction key on the remote control,then press ENTER button to
exit the setup.Touching the to exit directly
34
Letter-box Wide Screen
Picture format
on Disc
TV Screen Size
4:3
4:3
16:9
16:9
Pan Scan
SETTING THE TV SCREEN SIZE
Multi-aspect ratio suit to different TV screen size.
Function supported by DVD discs
There are many functions available on DVD discs and the functions vary per player and
per manufacturer.
Regional code and signal system
Picture proportion modes
Parent lock
Angles for viewing
Closed Caption
Dolby digital surround sound
DTS surround
Number of languages
Subtitle languages
2
35
MP3 OPERATION
Playing a disc, an SD/MMC card or a USB device containing files
insert a disc into the disc slot or SD/MMC card into the card
slot. The unit will automatically switch on when a disc, card or USB device is inserted.
The screen will display as follow:
T
MP3
Repeat playing
When playing MP3 files, press the RPT button repeatedly on the remote control to select
repeat mode: REPEAT ONE, OFF. While in REPEAT ONE mode, it will play one track
repeatedly. The defaulted mode is REPEAT ALL mode, the unit will play all tracks repeatedly.
Track selection
-Skip track backward/forward
When playing MP3 files, press / button on the remote control
to go to the previous or next track.
Connect a USB device or
ouch the / button on the screen to turn pages.
*Press / button on the remote control when stop playback also perform the same
function
*You can eject a disc by pressing button on the unit.
or press NEXT/PREV
button on the touchable screen
Note:
* This function can be operated using the remote control or touch top right corner of screen
to be functioned.
* If you make a mistake, press CLEAR button to clear.
- Selecting track by using number button
To select more than 9 track number, press the corresponding number buttons continuously.
Selecting any track directly by using Number button(0-9).
For example, if you want to play the 23th track, just press button 2 and then press button 3
and the corresponding track will be played.
36
PLAY
PAUSE
STOP
PREV
NEXT
SETUP
02:47 03:40
001/099
MP3
..
01 LA LUNE
01IN PARADISUM
02 NO ONE LIKE
02 WINTER IN J
02eden
03 SCARBOUGH
Touch this area to display numeric keypad.
35
Stop playing
When playing MP3 files, press button on the remote control to stop playback.
Press the button on the remote control or press PAUSE button on the touchable
screen while playing,press it again or press PLAY button on the touchable screen
to return to normal playback.
Pause playback
2 --4 --8 --16 --32 --
ISO FILE OPERATION
When playing the media with folders,press the / button on the remote control
or PREV/NEXT buttons on the screen to move the cursor to current folder then press
ENTER button on the remote control to confirm,and the first track of the current
folder will be played.
Fast-forward/fast-backward playing
Press / button on the remote control to select the speed of fast playing in ba-
ckward or forward direction:
*Long press / button continuously on the front panel also perform the same
function
37
35
IPOD OPERATION
1.Playing an IPOD device containing audio and vedio files
he unit will automatically switch on to the
USB interface. The screen will display as follow:
Connect an IPOD device to the USB slot and t
The number buttons
During MP3 playback, press the or button on the RC or touch on NEXT/PREV
button on the screen to select the next/previows track. Touch on the cursors on the
screen to turn pages in the folder with more than 6 tracks.
Quick track selection
When playing MP3 files, touch on the track directly to go to the playing.
Repeat playing
When playing MP3 files, press the RPT button repeatedly on the remote control to select
repeat mode: REPEAT ONE, ALL. While in REPEAT ONE mode, it will play one track
repeatedly. The defaulted mode is REPEAT ALL mode, the unit will play all tracks repeatedly.
Selecting any track 10- directly by using Number button(0-9). For 10+ track, just press on
GOTO button on the remote control then enter the relative digits.For example, if you want
to play the 23th track, after pressing on GOTO button on the remote control and then press
button 2 and then press button 3 and the corresponding track will be played.
Note: This function can be operated using the remote control.
PAUSE PLAYBACK
When playing MP3 files, press the button on the remote control or PAUSE button on the
screen to pause playing then touch on the PLAY button to resume playing.
ISO FILE OPERATION
when playing the IPOD with folders, the unit will play the first track in the first folder
automatically. Touch on the STOP button on the touch screen TWICE or the SETUP
button on the remote control to enter folders interface.
38
PLAY
PAUSE
STOP
PREV
NEXT
SETUP
02:47 03:40
001/099
USB
..
01 LA LUNE
01IN PARADISUM
02 NO ONE LIKE
02 WINTER IN J
02eden
03 SCARBOUGH
Touch this area to display numeric keypad.
INSTALLATION
Notes
Before finally installing the unit, connect the wiring temporarily, making sure it is all
connected up properly, and the unit and the system work properly.
Use only the parts included with unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger
if there is a sudden stop.
The semiconductor laser will be damaged if it overheats, so don't install the unit anywhere
hot--for instance, near a heater outlet.
If installation angle exceeds 30 from horizontal, the unit might not give its optimum
performance.
The cords must not cover up the area shown in the figure below. This is necessary to
allow the enginery to radiate freely.
30
38
Do not cover the area
39
INSTALLATION
39
Installation Method: DIN Front-Mount
Bend these claws
outward for a tight fit,
if necessary.
Front Wall of
the Cab
To support the unit
2
3
4
1
Detach the Unit
1. Take out the Outer Trim Frame.
2. Insert the keys supplied to the unit
at both sides of the unit (shown as
illustrated) until they click. Pulling the
keys makes it possible to remove the
unit from the dashboard.
40
TROUBLE SHOOTING
Power doesn't switch ON .
The unit doesn't operate.
Leads and connectors are
incorrectly connected
Confirm once more that all connections
are correct
A fuse has blown Fix the problem causing the blown fuse
and replace the old fuse with a new one
of the same capacity
Noise and other factors are
causing the built-in micropro-
cessor to operate incorrectly
Reset the unit
Operation with the remote
control isn't possible
The remote control operation
mode is incorrect
Switch to the correct remote control
mode
Battery power is low Load new batteries
Some operations are prohibited
with certain discs
Check using another disc
Playback is not possible. The disc is dirty
Clean the disc
The loaded disc is a type this
unit cannot play
Check what type the disc is
Non compatible video system
disc is loaded
Change to a disc compatible to your
video system
There's no sound
Connections are incorrect. Check connections
With some discs,96kHz output
is prohibited.
Switch the output setting to 48 Khz
The unit is performing still F.FWD
or F.REV playback
There is no sound during still F.FWD ,
F.REV playback
The prohibited mark is
displayed and operation is
not possible
The operation is prohibited for
the disc
This operation is not possible
The operation is not compatible
with the disc's organization
This operation is not possible
The picture stops (pauses)
and the unit cannot be
operated
Reading of data has become
impossible during playback
After pressing once start playback
once more
There's no sound Volume
level is low
The volume level is low Raise the volume level
There's audio and video
skipping
This unit is not firmly secured Secure this unit firmly
The picture is stretched the
aspect is incorrect
The aspect setting is incorrect
for the display
Select the appropriate setting for your
display
When the ignition switch is
turned ON (or turned to ACC),
the motor sounds
This unit confirms whether a
disc is loaded or not
This is a normal operation
Symptom
Cause
Remedy
Common problems
41
Symptom
Symptom
Cause
Cause
Remedy
Remedy
Problem during DVD playback
Problem during Video CD playback
Playback is not possible
The loaded disc has a different
region number from this unit
Replace the disc with one featuring the
same region number as this unit
Dialog language (and
subtitle language) can not
be switched.
The DVD playing does not
feature multiple language
recordings.
You cannot switch among multiple
languages if they aren't recorded on
the disc
You can only switch between
options indicated in the disc menu
Switch using the disc menu
No subtitles are displayed
The DVD playing does not feature
subtitles
Subtitles are not displayed if they are
not recorded on the disc
You can only switch between
options indicated in the disc menu
Switch using the disc menu
Playback is not with the
audio language and subtitle
language settings selected
in SET UP MENU
The DVD playing does not
feature dialog or subtitles in
the language selected in the
SET UP MENU
Switching to a selected language is not
possible if the language selected in the
SET UP MENU is not recorded on the disc
The picture is extremely
unclear/distorted and dark
during playback
The disc features a signal to
prohibit copying (some discs
may have this)
Since this unit is compatible with the copy
guard analog copy protect system. when
playing a disc that has a signal prohibiting
copying the picture may suffer from
horizontal stripes or other imperfections
when viewed on some displays. This does
not mean this unit is malfunctioning.
The PBC(playback control)
menu display cannot be
called up.
The video CD playing does not
feature PBC
This operation is not possible with video
Cds not featuring PBC
PBC is switched OFF Switch PBC ON
Repeat play and track/time
search are not possible
PBC is switched ON Switch PBC OFF.
42
40
CABLE CONNECTION
ACCESSORIES
Mounting Bracket (Half Sleeve) -------------------------------------------------------X1
Removable Trim Ring equipped on the unit ----------------------------------------X1
Mounting Screw M5 --------------------------------------------------------------------- X1
Rubber ------------------------------------------------------------------------------------- X1
Remote Control --------------------------------------------------------------------------- X1
Mount strap -------------------------------------------------------------------------------- X1
Release key ------------------------------------------------------------------------------- X2
User manual ----------------------------------------------------------------------------- X1
Wire connector -------------------------------------------------------------------------- X1
USB connector--------------------------------------------------------------------------- X1
Screws ----------------------------------------------------------------------------------- X 4
43
2
Black/black Plug
RADIO SIGNAL INPUT
1
3
Black/yellow Plug
EXOTERIC VIDEO INPUT
5
Brown/yellow Plug
REVERSE VIDEO IN
4
Brown/brown Plug
WOOF OUT
6
Gray/yellow Plug
Shallow gray/red Plug
AUDIO OUT R.R
15
AUDIO OUT F.L
13
Deep gray/red Plug
AUDIO OUT F.R
12
Black/white Plug
AUX IN-L
11
10
Gray/yellow Plug
9
Shallow gray/white Plug
AUDIO OUT R.L
REAR VIDEO OUT
REAR VIDEO OUT
Deep gray/white Plug
9
12
11
10
8
7
6
5
4
3
2
1
2
1
TV SIGNAL INPUT
1
2
14
13
7
Black/red Plug
AUX IN-R
14
DUAL-AUDIO-OUT-L
Blue/white Plug
15
Blue/red Plug
8
DUAL-AUDIO-OUT-R
Orange/orange Plug
DIGITAL AUDIO OUT
16
1
3
5
7
2
4
6
8
A
B
1 3
5
7
2
4
6
8
16
9 15
14
13
1211
10
8
7
6
5
4
3
21
REVERSE /GEAR
PARKING BRAKE
Orange
Brown
A2.TEL MUTE
A1.NOTHING
A3.NOTHING
A5.ANTENNA POWER+
A4.BATTERY
A6.LAMP IN
A8.GROUND
A7.IGNITION KEY
B1.SPEAKER REAR R+
B2.SPEAKER REAR R-
B3.SPEAKER FRONT R+
B4.SPEAKER FRONT R-
B5.SPEAKER FRONT L+
B6.SPEAKER FRONT L-
B7.SPEAKER REAR L+
B8.SPEAKER REAR L-
GENERAL
power requirement ----------------------------------------------
grounding system ------------ -----------
max: current consumption ------- ----
max: power output -------- ------- 65Wx4
load impedance --------------- -------
dimensions-------------------------------------------- MM
weight--------------------------------------------------------------------------------3.3KG
DVD PLAYER
S/N ratio ------ more than 62dB(1kHz)
dynamic range -------------- ----more than 80dB(1kHz)
distortion ------------------ -----less than
video output --------------- ------ ------------------
audio output (RCA) ---------------- ------ 2.0Vrms+0.3V 10K
12VDC(10.8~16V)
-------------------------------- negative type
-------------------------------------------- 15 A
-----------------------------------------------
------------------------------------ 4 4-8
--------------------------------------------------
-----------------------------
----------------------------------------- 0.2%
---------- ------ 1.0Vp--p+0.2V/75
---------------------
FM TUNER
frequency range ----------------------------------------65.0~74.0/87.5~108.0MHz
usable sensitivity ---------------------------------------------------------------10dB
S/N ratio -------------------------------------------------------------------- 50dB(mono)
distortion --------------------------------------------------------------------0.5%(mono)
stereo separation ---------------------------------------------- 30dB(65dBu,1kHz)
MW TUNER
frequency range ----------------------------------------------------- 522~1620 kHz
usable sensitivity --------------------------------------------------------------- 30dB
signal-to-noise ratio ------------------------------------------------------------- 40dB
180(L) 160(W) 100(H)
44
SPECIFICATION
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eonon D1301 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eonon D1301 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info