Preparing Your Radio For Use
4
Preparing
5
6
a
b
---
Attaching / Removing the Belt Clip
5
To attach, slot the clip onto the slot on the
b ack of the battery and slide up until you
hear a “click”
6
To remove, pull the tab towards the belt
clip (a). Then slide the belt clip
downwards (b)
Attaching / Removing the Aerial
1
To attach, carefully align the aerial with the
socket. Screw in the aerial clockwise (taking
care not to cross the thread) until it is seated
firmly with the accessory cover’s rubber ring
between the aerial & the the top of the radio.
2
To remove, unscrew the aerial anti-clockwise.
1
2
Attaching / Removing Audio Accessories
3
To attach, remove the accessory cover by unscrewing the
locking screw anti-clockwise (leave cover secured under
antenna as this provides a waterproof seal). Attach accessory
plug by locating over the socket. Carefully tighten the locking
screw clockwise until finger tight (do not tighten with a
screwdriver etc).
4
To remove, unscrew accessory plug the locking screw by
hand in an anti-clockwise direction (carefully use a coin or
screwdriver if too tight). Ensure you re-fit the accessory
waterproof cover so as to protect the accessory socket.