729079

Engenius DuraFon-UHF Handleiding

23
Verklein
Vergroot
Pagina terug
1/65
Pagina verder
User Manual
DuraFon-UHF-HC
Durable, Long-Range, Dual Mode Radio Phone
~2~
Table of Contents
Safety Instructions ................................................................................................... 4
General Safety Instructions ................................................................................ 4
Product Safety Instructions ................................................................................ 4
Battery Safety Instructions ................................................................................. 6
Regulatory Information ........................................................................................... 7
Equipment Checklist .............................................................................................. 11
Handset Illustration ............................................................................................... 12
Handset Features .................................................................................................. 14
Basic Handset Features ..................................................................................... 14
Additional Handset Features ............................................................................ 16
Administrator Features (Register to PRO base) ................................................ 19
Charger Illustration ................................................................................................ 20
Charger Features ................................................................................................... 21
Getting Started ...................................................................................................... 22
Handset and Charger Installation ..................................................................... 22
Basic Operations .................................................................................................... 23
Operation Modes .............................................................................................. 23
Base Operation Modes ................................................................................. 23
Handset Operation Modes ........................................................................... 23
Menu Tree (Register to PRO base only) ............................................................ 24
Making a Telephone Call................................................................................... 25
Making an 2-Way/ Intercom Call ...................................................................... 25
Handset to Handset Calls ............................................................................. 25
Making a Broadcast via 900MHz ...................................................................... 26
Handset to Handset Calls ............................................................................ 26
Making a Broadcast via UHF ............................................................................. 27
Handset to UHF walkie-talkie....................................................................... 27
Redial ................................................................................................................ 27
Receiving a Telephone Call ............................................................................... 28
Receiving an Intercom Call ............................................................................... 28
Ending a Call...................................................................................................... 29
Adjusting Receiver (Earpiece) Voice Volume .................................................... 29
Adjusting Speaker Volume ................................................................................ 29
Placing a Call On Hold ....................................................................................... 30
Mute ................................................................................................................. 30
Do Not Disturb (Silent Ring) .............................................................................. 30
KeyGuard .......................................................................................................... 31
~3~
To View Missed Call(s) ...................................................................................... 31
To Call back from Call Log ................................................................................. 31
Battery Recharge and Replacement ................................................................. 32
Walkie-Talkie Mode .......................................................................................... 33
Advanced Operations ............................................................................................ 34
Handset Registration (Register to PRO base only) ............................................ 34
Advanced Registration (Register to PRO base only) ......................................... 35
Handset Group Subscription ............................................................................. 37
Call Transfer (Register to PRO base only) ......................................................... 37
3-Way Conferencing (Register to PRO base only)............................................. 38
Base Select (Register to PRO base only ) .......................................................... 39
Call Waiting (Register to PRO base only) .......................................................... 39
Auto Attendant (AA) (Register to PRO base only) ............................................ 40
AA Configuration by Administrator (Register to PRO base only) ...................... 41
Change AA Parameters (Register to PRO base only) ........................................ 42
Line Dedication (Register to PRO base only) .................................................... 43
Line Selection (Register to PRO base only) ....................................................... 43
Change System and Line Settings by Admin (Register to PRO base only) ........ 44
Phonebook Operations (Register to PRO base only) ........................................ 45
Programmable PBX Options (Register to PRO base only) ................................. 49
Broadcast through PBX (Register to PRO base only) ........................................ 50
UHF Frequencies and Codes .................................................................................. 52
Menu Operations (Register to PRO base only) ...................................................... 54
Technical Specifications ......................................................................................... 60
Index ...................................................................................................................... 62
FCC Part 68 Statement .......................................................................................... 64
~4~
Safety Instructions
Caution: Your wireless telephone gives you freedom and flexibility to
stay in touch while you move around. However, when using your phone
equipment, safety instructions should be followed to avoid the risks of
fire, electric shock, injury to person, and damage to property.
General Safety Instructions
1. When using your wireless handset, ensure your safety and the safety of others:
a. Always watch where you are walking and standing.
b. Don’t let a phone call distract you from working safely.
c. If power goes out, the phone won’t work. A backup power source or
landline is recommended.
2. In an emergency:
a. If an emergency occurs, dial the emergency phone number. Remember: if
you are in an area where your phone does not have a clear signal from the
base, it is highly probable that the call may not go through. Locate the
nearest landline telephone or other communications device to call for help.
b. Emergency calls may not automatically provide emergency personnel with
your name, phone number or location.
3. Notice to hearing aid users: This phone system is compatible with inductively
coupled hearing aids.
4. Notice to cardiac pacemaker users: Preliminary studies done by the US FDA and
others have shown that, although interference to the implanted cardiac
pacemaker may occur when operating very closely, wireless telephones “do not
seem to pose a significant problem for pacemaker wearers.” However, until
more is known, the FDA suggests that people with pacemakers may want to
take precautions when using or carrying a wireless telephone to ensure that
there is ample distance between the telephone and the pacemaker. Do not
carry the handset in a breast pocket. If you have any reason to suspect that
interference is taking place, turn off your handset immediately.
Product Safety Instructions
1. Read and understand all instructions.
~5~
2. Follow all warnings and instructions including those marked on the product.
3. Changes or modifications to this product not expressively approved by the
manufacturer will void the warranty and the FCC authorization to operate the
equipment. Use only manufacturer-provided accessories.
4. Do not use the telephone near water. Never spill liquid of any kind on this
product.
5. Unplug the product from the wall telephone jack and power outlet before
cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
6. Do not place this product on an unstable cart, stand, or table. The product may
fall and cause personal injury or damage to the product or other property.
7. In the event of a power outage, your handset charger will not recharge the
handset battery, and the base station will not allow you to make an outgoing
call or take an incoming call. Both the charger and the base station require
electricity for operation. You should have a telephone that does not require
electricity available for use during power outage, or have a temporary backup
power supply.
8. Slots or openings in the product’s housing are provided for ventilation. These
openings must not be blocked or covered. Placing the product on a bed,
carpeting, or other similar surface may block these openings and should be
avoided. This product should never be placed near or over a radiator or heat
register or in a built-in installation unless proper ventilation is provided.
9. Never push objects of any kind into this product through housing
slots/openings as they may damage the product, touch dangerous voltage
points, or short-circuit parts that could result in fire, electric shock, or injury.
10. This product should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
11. Do not overload wall power outlets or extension cords as this may result in fire
or electric shock.
12. To avoid electric shock or burn, do not disassemble this product. Send this
product to an authorized service center when service or repair work is required.
Call Customer Service for locations near you. Opening or removing covers may
expose you to dangerous voltages, electrical currents, or other risks. Incorrect
reassembling of the product may cause electric shock when the product is
subsequently used.
13. Avoid using the product during a storm. There may be a risk of electric shock
from lightning.
14. Do not place the product where persons can step, trip, or fall on it.
~6~
15. Do not place conductive objects over or near the antenna.
16. Do not use the product to report a gas leak while in the vicinity of the leak.
17. Do not install the base station or the handset charger near microwave ovens,
radios, TV sets, speakers, or other electrical equipment. These appliances may
cause interference to the product or experience interference from the product.
18. Unplug the base station or the charger adaptor from the power outlet and refer
to an authorized service center under the following conditions:
a. Liquid has been spilled into the product.
b. The power supply cord or plug is damaged or frayed.
c. The product has been exposed to rain or water.
d. The product does not operate normally when following the operating
instructions.
e. The product has been dropped or housing has been damaged.
f. The product shows a distinct change in performance.
Battery Safety Instructions
1. Use only manufacturer-approved Li-ion rechargeable batteries and charger. Do
not use other types of rechargeable batteries or non-rechargeable batteries.
The batteries could short-circuit and damage the battery enclosure, causing a
hazardous condition.
2. Follow the charging instructions in this manual and instruction labels and
markings in the handset and charger compartments.
3. Batteries must be recycled or disposed of properly. Do not dispose of batteries
in a fire, as the cells may explode.
4. Do not dispose of batteries in municipal waste. Check with local codes for
disposal instructions.
5. Exercise care in handling batteries. Conductive materials such as rings,
bracelets, keys, pocketknives, and coins may cause the battery or conductive
material to short-circuit, overheat, and cause burns or fire.
6. Do not expose batteries to rain or water.
7. Do not open or mutilate the battery. The released electrolyte is corrosive and
may cause injury to eyes or skin. The electrolyte may be toxic if swallowed.
8. During charging, the battery heats up. This is normal and is not dangerous.
~7~
Regulatory Information
DuraFon-UHF-HC (SPR-922U1)
FCC ID: A8J-SPR922U1
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation.
Privacy of communications may not be ensured when using this phone.
Base Station
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
~8~
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with the FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
This device has been designed to operate with an antenna having a maximum
gain of 1.5 dBi. Antennae having a higher gain are strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
Portable Handset
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
~9~
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please follow the operation
instructions as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with IC RF exposure compliance requirements, please follow operation
instructions as documented in this manual.
~10~
This device has been designed to operate with an antenna having a maximum
gain of 1.5dBi. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
~11~
Equipment Checklist
In a Handset package, please find the following components:
1.
2.
3.
4.
5.
6.
7.
8.
~12~
Handset Illustration
Soft key
Display
Mode
End
Dialing key
Intercom
Antenna
Receiver
(Earpiece)
Talk / Flash
Speakerphone
Soft key
Microphone
Up / Down
Knob
(Power/Volume
)
USB Connector
Walkie LED
~13~
Earphone Jack
PTT
~14~
Handset Features
Basic Handset Features
1.
4-line LCD (Liquid Crystal Display)
a.
The LCD display has LED (Light Emitting Diode) backlighting.
b.
The 1
st
line of the LCD consists of icons.
c.
Icons from left to right:
(1)
RSSI (Receive Signal Strength Indicator; 900 MHz only)
During a call, the number of bars is proportional to the radio signal
strength received.
(2)
Call In-progress (ON/OFF-Hook)
Indicates if phone line mode is active
(3)
Intercom In-progress
Indicates if Intercom mode is active
(4)
Handset ID
Displays a handset icon and a 2-digit handset ID
(5)
Channel Number in Walkie
Indicates the channel (1–5) selected
(6)
Two-Digit Address Index
Shows address index when viewing contents of the call logs.
(7)
Line Indicator
Indicates the number of the line being accessed by the handset.
(8)
Speaker Phone
Indicates if speaker phone is active
(9)
Battery Strength
● Number of bars is proportional to the amount of battery time
DuraFon PRO
REDIAL MENU
2
10
(1)
(2)
(3)
(4)
(5)
(6,7)
(8)
(9)
e
e
d
d
b,c
~15~
remaining.
● Indicates charging when in charger cradle.
d.
The second and third lines of the LCD, maximum 14 characters each,
display status, message, menu selections, or user-editable alphanumerical
characters.
e.
The last line displays the left and right soft keys.
2.
Ringer
a.
Rings to an incoming call.
b.
Distinctive alert sounds indicate various events:
●
Single beep: successful key entry
●
Double beep: failed operation or invalid key entry; also, power on/off
●
Periodic 1-Long-2-Short beeps (every 1 minute): low battery warning
●
Periodic Long Series of beeps (repeat every 30 seconds): on-hold call
alert
3.
TALK/FLASH ( )
a.
Places or answers a telephone or intercom call
b.
Sends a flash signal to phone line to retrieve a dial tone after the call ends,
or to perform the call waiting feature provided by local phone companies
during a call.
c.
Enables/disables speakerphone when held for one second.
4.
SPEAKERPHONE ( )
Press to enable/disable the speakerphone during incoming, outgoing or
intercom calls.
5.
2-WAY INTERCOM ( )
Places an intercom call to another handset ID or group ID (group paging).
Intercom calls are digital, full-duplex, and are conducted without the
assistance from the base.
6.
PTT (Push-to-Talk)
a.
Activate half-duplex broadcasting via UHF (ultra high frequency) band or
900MHz band
b.
Press the Mode key repeatedly to set the desired channel (1–5) in
advance.
7.
Left/Right Soft Keys(
/
)
Make menu selection.
~16~
8.
Up/Down Key
a.
Scroll through records and menu selections.
b.
Adjust receiver voice volume when in Talk mode.
9.
END Key ( )
a.
Ends a call.
b.
Leaves current menu operation; reverts one level.
10.
MODE Key ( )
a.
Enter UHF 2-way radio operation setting.
b.
Setting channel/Frequency/Code/Microphone gain/VOX.
11.
Walkie LED
a.
Static red light: Transmitting.
b.
Static green light: Receiving UHF signal
c.
Blinking green light: Standby
Additional Handset Features
1.
Multiple Handset Registration (Register to PRO base)
a.
Up to 90 handsets can be registered to a single base.
b.
IDs 10 and 11 are the first two handset IDs assigned by the base and are
designated “administrators.” Use an administrator handset to change
base settings such as the greeting message and other administrative
functions.
Note: Unless necessary, it is better not to assign IDs 10 and 11 to
DuraWalkie handsets.
c.
IDs 01-07: Group IDs. Handsets can “subscribe” from the handset menu
to group(s) and be paged when a landline caller or an intercom caller
enters a group ID.
2.
Ringer/Vibrator
a.
Six ringer volume-levels (high/medium/low/vibrate/vibrate-then-ring/off)
b.
Four ringer type selections
3.
Caller ID
Displays incoming call phone number and name on the LCD (needs caller ID
service from local telephone company)
~17~
4.
Call Waiting with Caller ID
Displays 2
nd
incoming call information on the same phone line when 1
st
call is in
progress (needs call waiting with caller ID service from local telephone
company)
5.
Name Tagging with Caller ID
Match the caller ID with the phone book entries; once matched, the LCD
screen will display the name or nickname instead of pure caller ID info (needs
call waiting with caller ID service from local telephone company)
6.
DND (Do Not Disturb, i.e., Silent Ring)
7.
Three Call Logs
a.
Called Log: Stores 10 phone numbers (up to 28 digits each) dialed most
recently. Can perform last-number redial on all 10 numbers.
b.
Received Call Log: Stores 10 entries (14-digit phone number, 14-character
names, and time stamp). Needs caller ID service from local telephone
company.
c.
Missed Call Log: Stores 10 entries (14-digit phone number, 14-character
names, and time stamp). Needs caller ID service from local telephone
company.
d.
Phone numbers and names can be saved to phonebook while in display.
8.
KeyGuard
9.
Dialing Prefix
One access code can be programmed to be automatically prefixed to the dialed
number. This code can include up to 14 digits, including pause(s), and can be
appended when dialing from call logs, phonebook, or dial-and-send
functionality.
10.
Call Hold
a.
Places call on hold
b.
Battery hot swap: Change battery while call is on hold.
11.
Mute
12.
Phonebook
a.
Capacity for 90 entries, each of which stores a phone number or handset
ID (up to 28-digit) and name (up to 14-character)
b.
Alphabetically sorted display and search
c.
Dial from display
~18~
d.
In stand-by mode, enter the phone book by pressing the Up/Down
scrolling key
e.
Phone book transfer via air
Transfer one phonebook to one handset or to all registered handsets
Transfer all phonebooks to one handset or to all registered handsets
13.
Key Tone
a.
Three key-tone volume levels (high/low/off)
b.
Four key-tone type selections
14.
Call Timer
Displays call time duration for current call during and immediately after the call
15.
Call transfer (Register to PRO base)
a.
Direct Transfer: transfer a telephone call to another handset without
announcement.
b.
Announced Transfer: speak to the destination handset before transferring a
telephone call.
16.
Call Conferencing (Register to PRO base)
a.
2-handset, 1-line conferencing.
b.
1-handset, 2-line conferencing.
17.
Line Selection (Register to PRO base)
When this function is enabled from the handset menu, a handset user will be
prompted to select from a list of available lines before making an outgoing call.
18.
Programmable PBX (private branch exchange) options:
a.
Program frequently used PBX features
into the DuraFon handset.
b.
Up to 9 entries can be saved.
c.
Once the feature codes are programmed, you can
use those functions during a call by pressing OPTION .
19.
Base Selection (Register to PRO base)
When enabled from the handset menu, a handset user can manually select the
nearest base before making an outgoing call.
~19~
Administrator Features (Register to PRO base)
Handsets 10 and 11 are designated administrators. Both have the same authority
to perform base station administrative functions from their handset menus. No
password is required.
1.
DTMF and Pulse dialing support (For DuraFon PRO only)
a.
From an administrator handset (Handset 10 or 11), press MENU — 9 — 1
—enter base ID (00–07)— 1 to select Tone or Pulse dialing mode.
b.
The default setting is Tone dialing.
2.
Administrator programmable Flash key timing (For DuraFon PRO only)
a.
From an administrator handset (Handset 10 or 11), press MENU— 9 — 1
—enter base ID (00–07) — 2 to select Flash key timing.
b.
Nine timing selections (100 ms–900 ms).
c.
The default timing value (300 ms) works in most areas. Changing this
setting may result in Flash function not working. Change only when you
are certain the new value will work.
3.
Call Transfer to PBX Extension (For DuraFon PRO only)
a.
When the DuraFon PRO is installed behind a PBX system, you can pre-
program the feature code of call transfer function.
b.
Need to adjust the Flash time to match your PBX setting.
If administrator handsets (handsets 10 and 11) are lost, all settings must
be reset (reset the base and re-register all handsets).
~20~
Charger Illustration
Spare Battery
Charging Slot
Charging
connector
Handset
Charging Slot
Spare Battery
Charging Indicator
~21~
Charger Features
1.
DC In
Connection for charger AC adaptor.
2.
Handset Charging Slot
a.
The handset battery will charge when the handset is placed in the cradle.
b.
The handset LCD will indicate charging status:
●
Charging: The battery status bar is animated and the LCD screen
displays a “Charging” message.
●
Fully Charged: battery status bar stands still and the LCD screen displays
a “Fully Charged” message.
●
Charge Fail: If an error occurs while charging, the LCD screen will
display a “Charge Fail” message.
3.
Spare Battery Charging Slot
a
Place spare battery in slot to charge.
b.
LED indicator:
●
Green: Charging
●
Off: Fully charged (or no battery in slot)
4.
It is impossible to overcharge the battery using this charger.
Notes:
1. Fully charge battery packs before first use.
2. One handset and one spare battery can be charged at the same time.
~22~
Getting Started
Handset and Charger Installation
1.
Plug the transformer end of the charger AC/DC adaptor into a standard AC
electric power outlet. Plug the other end into the “DC In” jack on the back of
the charger.
2.
Install battery pack onto the handset.
3.
Install handset antenna.
4.
Place handset onto the front charger slot.
5.
Fully charge the battery for three hours before use.
6.
The phone system is now ready to perform basic functions such as making and
receiving phone calls and intercom calls. No base station or handset
programming is needed for basic operations.
Notes:
1. Handset(s) packaged along with a base station are pre-
registered at the factory. If you have a new handset, you will
need to register the handset with the base station in order to
be recognized as a member handset by the base(s) and by
other handsets. See Handset Registration.
2. Fully charge battery packs before the first usage.
~23~
Basic Operations
Operation Modes
Both the base station and handset have levels of operation at which only certain
procedures or functions can be performed.
Base Operation Modes
1.
IDLE mode: This is the default operating mode. Intercom, broadcast, and
volume keys are active.
2.
TALK mode: The base operates in this mode during phone call, intercom, and
broadcast operation. The “In Use,” “Intercom,” and “Broadcast” LED indicators
will light up respectively.
3.
REGISTRATION mode: The base enters this mode when the REG button is held
for three seconds. In this mode, no base unit keys are active. Four LEDs will
be lit when the base is in Registration mode.
Handset Operation Modes
1.
IDLE mode: This is the default operating mode.
●
If there is no on-going activity, the handset
automatically goes into SLEEP/IDLE mode to save
battery power.
●
Turn the On/Off/Volume knob clockwise. You will
hear a beep-beep tone and see LCD and backlight to
indicate the handset is ON.
To turn the handset off, the Power/Volume knob
counterclockwise.
●
The idle screen display name can be edited.
●
The 2-digit number represents the handset ID.
2.
MENU mode
●
Press the right soft key to activate MENU mode.
●
In MENU mode, the handset settings and
information contained in memory can be changed.
●
The functions available through the MENU selection
are covered in greater detail beginning on page 38.
●
The MENU structure display is shown below:
10
DuraFon PRO
REDIAL MENU
10
Main Menu: 
1.KeyGuard
2.PhoneBook
~24~
Menu Tree (Register to PRO base only)
Main menu
Sub-menu
1.KeyGuard
2.PhoneBook
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
4.Key Tone
1.Dial Prefix
2.Group Select
3.Base Select
4.Clear
5.Naming
6.Contrast
7.Backlight
8.Line Select
9.PBX Options
0.Language
#.Walkie-Talkie
*.Name Tag
6.Registration
7.BC/INT Type
5.Settings
4.Sound
3.Call Logs
9.Admin
8.Multi-base
Select Mode:
1.Add Base
Admin:
1.System
2.Line Setting
3.Auto Attndnt
1.Register
2.Deregister
3.Remote REG
1.WT On/Off
2.PA On/Off
~25~
Making a Telephone Call
Press , wait for dial tone, and then enter a phone number.
Alternatively, first enter a phone number then press .
When using this method, you can use the CLEAR (left soft key) and DELETE
(right soft key) to edit the number entered. “Delete” erases the last digit
entered. “Clear” erases the entire line, but the phone remains in idle mode.
Speed dial by accessing the phone book:
1.
Press the Up/Down key to enter the phone book.
2.
Press to dial the number.
3.
To abort dialing, press .
Notes:
1. After a link is established, the Base ID will appear on the upper-
right corner. If no Base ID appears, you are approaching the
boundary of coverage.
2. If the line is occupied, the LCD shows “No Line Available” and
the handset returns to idle mode.
3. If a link cannot be established, the LCD will show “No Base”
after a 12-second time out.
4. A call duration timer will appear, displaying the length of the
call, once a link is established.
5. During the call, press to activate the speakerphone.
Making an 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private Intercom/2-way radio
calls independent of the base station. Intercom/2-way communication can be
initiated from, and directed to, any base station or handset.
Handset to Handset Calls
1.
Press followed by a two-digit handset ID or Group
ID to initiate a call.
10
EnGenius
8884328668
ADD OPTION
10
Please enter
Ext. #: 12
~26~
2.
Press to end the call.
Notes:
6. Intercom calls can be made regardless of whether the base
station is present.
7. If a group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller.
See “Handset Group Subscription.”
8. If a link cannot be established, the LCD shows “No
Connection” after a 12-second timeout.
9. During the call, press to activate the speakerphone.
Making a Broadcast via 900MHz
Handset to Handset Calls
Since the DuraFon-UHF-HC is able to broadcast to the DuraFon-PRO system
handsets via 900MHz, or to other DuraFon-UHF-HC or other UHF radio handsets
via UHF band, you must choose the desired frequency for walkie-talkie operation
before initiating a broadcast.
To activate walkie-talkie mode: enter the key sequence MENU— 5 — # — 1 , then
select “OFF” to enable WT mode in the digital 900MHz band.
Press “End” to return to idle mode. The walkie icon will disappear from the
display.
Broadcasting to all handsets in range:
1.
Press and hold the PTT (push-to-talk) key on one handset.
2.
Listen for a 2-short-1-long beep sequence, which signifies that the
initiating handset is broadcasting to all handsets within communication
coverage.
3.
Start to speak after the “beep” sound; the speakerphones on destination
handsets will be activated.
4.
Release the PTT key to end the broadcast.
Broadcasting to a group of handsets:
1.
Enter the group ID and then press and hold the PTT
(push-to-talk) key on one handset.
2.
Listen for a 2-short-1-long beep sequence, which
signifies that the initiating handset is broadcasting
10
PA paging
to Ext. # 02
~27~
to all handsets within communication coverage.
3.
Start to speak after the “beep” sound; the
speakerphones on destination handsets will be
activated.
4.
Release the PTT key to end the broadcast.
Broadcasting to an individual handset:
1.
Enter the handset ID and then press and hold the
PTT (push-to-talk) key on one handset.
2.
Listen for a 2-short-1-long beep sequence, which
signifies that the initiating handset is broadcasting
to all handsets within communication coverage.
3.
Start to speak after the “beep” sound; the
speakerphones on destination handsets will be
activated.
4.
Release the PTT key to end the broadcast.
Making a Broadcast via UHF
Handset to UHF Walkie-Talkie Calls
Activating walkie-talkie mode:
1.
Enter the key sequence MENU— 5 — # — 1 , then
select “OFF” to enable WT mode in the digital
900MHz band.
2.
Press “End” to return to idle mode. The walkie icon
will disappear from the display.
Broadcasting to all UHF walkie-talkie handsets in range:
1.
Ensure that all handsets share the same setting for
Channel/ Frequency/Code.
2.
Press the PTT (push-to-talk) key. The LCD will
display the selected channel. The handset is now
ready to transmit to all handsets within
communication coverage.
3.
Start to speak immediately; the speakerphone of
destination handsets will be activated.
4.
Release the PTT key to end the broadcast.
Redial
1.
Press REDIAL (left soft key).
10
PA paging
to Ext. # 12
1
10
TX
10 1
DuraFon PRO
REDIAL MENU
~28~
2.
The LCD display will show the last phone number dialed. To dial this number,
press DIAL (left soft key).
3.
Use the Up/Down key to scroll through the last 10 phone numbers dialed.
Select a number and press DIAL.
Note:
Intercom numbers (handset IDs) are not stored in the last 10 numbers
dialed log.
Receiving a Telephone Call
When an incoming call arrives, the ringer will ring or vibrate unless the ringer has
been turned off.
If the handset is on the charger cradle (ringer will be temporarily switched to
“Ring” if it had previously been set to “Vibrate”), lift the handset and start
conversation.
If the handset is not on the cradle, press any key (except or the SILENT soft
key) to answer.
Notes:
1. Press SILENT (left soft key) to ignore the call. Unlike turning
off the ringer (from the handset menu), the SILENT key
operation is valid only for the current call.
2. If caller ID service is available, the LCD will display the
incoming call information. If the LCD shows “Private” or
“Unknown,” the caller’s information may have been blocked
by the caller or the originating phone company.
3. During the call, press to activate the speakerphone.
Receiving an Intercom Call
When an intercom call arrives, the ringer will ring or vibrate unless the ringer has
been turned off. Press to answer the intercom call.
~29~
If the handset is on the charger cradle (ringer will be temporarily switched to
“Ring” if it has been set to “Vibrate”), lift the handset and start conversation.
If the handset is not on the cradle, press any key (except or the SILENT soft
key) to answer.
Notes:
1. The LCD displays the caller’s handset ID.
2. Press SILENT (left soft key) to ignore the call. Unlike turning off
the ringer, the SILENT key operation is valid only for the current
call.
3. During the call, press to activate the speakerphone.
Ending a Call
To end a telephone or intercom call, press or place the handset into the
charger cradle.
Adjusting Receiver (Earpiece) Voice Volume
Voice volume can only be adjusted during a call.
There are 6 volume levels; the default setting is 3. Use the
Up/Down key to adjust.
The new setting remains effective for all future calls until
changed.
Adjusting Speaker Volume
The speaker volume can only be adjusted with the
Power/Volume knob.
Rotate the knob clockwise to increase and counterclockwise
to decrease volume.
10 1
DuraFon PRO
UNHOLD OPTION
10
00:00:10
Volume:4
MUTE HOLD
~30~
Placing a Call Hold
When a call is in progress, it can be put on hold by pressing
HOLD (right soft key).
To return to the conversation, press UNHOLD.
Notes:
1. A call placed on hold can only be retrieved by the handset that
puts it on hold.
2. The handset LCD indicates that a call is on hold. An alert tone
(double beep) every 30 seconds reminds the handset user that
a call is on hold.
3. If the operation (e.g., call transfer) after putting a call on-hold
fails, the held call may be dropped.
4. You can power off the handset (e.g., to change the battery)
while a call is on hold. When power is restored, press UNHOLD
(left soft key) to terminate the hold state.
Mute
After a link is established, you can press OPTION (left soft key) and then 0 to mute
the handset microphone.
When mute is active, the caller on the other end will not hear your voice, but still
can speak to you.
To leave the mute state, press UNMUTE (left soft key). Mute is effective only for
the current call.
Do Not Disturb (Silent Ring)
Enter the key sequence MENU— 4 — 1 , then select “Off.”
Press SAVE to confirm your choice. This will turn off the ringer
until it is turned on again from the menu.
To temporarily silence the ringer when an incoming call arrives,
press SILENT (left soft key).
10
Sounds: 
1. Ring Volume
2. Ring Tone
10 1
You have a
Call on hold
UNHOLD OPTION
10
Ring Volume: 
Off
SAVE
~31~
KeyGuard
To prevent accidental dialing, you can press MENU (right soft
key), then 1 to select KeyGuard. The handset keypad will be
locked. No key entry will be accepted while KeyGuard is active
except the Power on/off key.
To unlock the keypad, press UNLOCK (left soft key), then,
within 2 seconds, press the 1 to unlock.
KeyGuard remains in effect until the handset is unlocked or
powered off.
To View Missed Call(s)
To view missed incoming call(s), press the VIEW soft key to
enter the call logs.
You must subscribe to caller ID service from a local telecom
company to use this feature.
To Call Back from Call Log
While reviewing missed incoming call(s), you can call back directly by
pressing .
The displayed CID (customer identification number) in most cases will
be a 10-digit number (3-digit area code followed by 7-digit telephone
number). If the area code is unnecessary for calling back, you can follow
this procedure to adjust the callback number:
1.
Press FORMAT once to remove the 3-digit area code.
2.
Press FORMAT twice to add “1” in front of the original
displayed number.
3.
Press FORMAT three times to return to the original displayed
number.
(The CID default is 10 digits. When a user presses the FORMAT
key, the number will rotate between its 7-digit, 11-digit, and 10-
digit forms.)
11
DuraFon PRO
UNLOCK
10
Press 1 to
confirm
unlock
10
You have 1
missed call
VIEW MENU
~32~
After choosing a number, press to call back.
Battery Recharge and Replacement
Charge the battery when any of the following happen:
●
Phone beeps twice every two seconds.
●
Battery icon is empty.
●
Phone does not respond when a key is pressed.
●
LCD and backlighting become dim.
●
Talk range shortfall is experienced.
You can replace the handset battery while a call-in-progress is on hold.
Battery talk time and standby time vary depending on the talk/standby pattern and
the operating distance. Putting the handset back to charger cradle as often as
possible is recommended for best performance. Use only the manufacturer-
provided battery and charger!
~33~
Walkie-Talkie Mode
Channel :
1
2
10
End/PTT
To save and exit
MODE
Set FREQ:
1
2
10
End/PTT
To save and exit
0
2
10
End/PTT
To save and exit
Up/Down or number
to select Channel 1~5
Up/Down or numbers
To select Frequency
number 1~56
Up/Down or numbers
To select Code 0~121
MODE
MODE
2
10
End/PTT
To save and exit
Mic. Gain:
2
1 - 3
MODE
MODE
Up/Down or number
To select microphone gain
3= High sensitivity
2= Medium sensitivity (default)
1= Low sensitivity, for noise
enviornments
2
10
VOX On/Off
Off
End/PTT
To save and exit
Up/Down
To select VOX sensitivity
Off = Deactivate VOX (default)
High = High sensitivity
Medium = Medium sensitivity
Low = Low sensitivity, for noise
enviornments
REDIAL MENU
2
10
DuraFon PRO
1
FREQ
MODE
2
10
Scan Cannel
Off
End/PTT
To save and exit
Up/Down
To select the channel to be scan
Off = Deactivate scan (default)
1
Right soft key
To activate/deactivate the scan action
~34~
To program Walkie-Talkie mode:
1.
Press the “Mode” key.
2.
Press the Up/Down key to scroll the channel selection. Channels 1 to 5 are
used for UHF band, while channel 6 is used for digital band.
3.
Press the “Mode” key to enter the desired frequency number setting. You
can enter using number keys directly (1–56), or use the Up/Down key to
scroll to the frequency number.
4.
Press the “Mode” key to enter the desired Code number setting. You can
enter using the number keys directly (0–121), or use the Up/Down key to
scroll to the code number.
5.
Press the “Mode” key to set the desired microphone gain setting. Use the
Up/Down key to scroll to the gain level (1–3).
3= High sensitivity
2= Medium sensitivity (default)
1= Low sensitivity, for noisy environments
6.
Press the “Mode” key to select the VOX sensitivity (setting for headset
only). Use the Up/Down key to scroll to the VOX activate gain level (1-3).
3= High sensitivity
2= Medium sensitivity
1= Low sensitivity, for noisy environments
Off= Deactivate VOX (default)
7.
Press the “Mode” key to enter the scan channel setting. Use the Up/Down
key to scroll to the desired channel. Use the left soft key to
activate/deactivate the scan. If the LCD displays “Off” on the right side,
scan is deactivated (default).
8.
Press the “End” or PTT key to store and exit the two-way programming
mode.
Advanced Operations
Handset Registration (Register to PRO base only)
Upon first use of a handset, you must register the handset to the base station.
(The handset ID is 00 before registering to the base station.)
It is possible to change a handset’s ID. Such a change is useful for promoting a
handset from a user to an administrator (ID 10 or 11) (or vice versa) or
differentiating two handsets with the same handset ID.
Registration
1.
Press MENU— 6 to enter the registration mode
~35~
2.
Press and hold the base’s REG (Registration) button for 2 seconds until the
L1, L2, L3, and L4 LEDs come on.
3.
Press 1 on the handset to complete the registration process. The base
station will assign a handset ID between 10 and 99. The assigned ID will
be displayed on the handset LCD, indicating successful registration.
4.
Repeat these steps for all additional handsets.
Notes:
1. The first two handsets registered will be given IDs 10 and 11,
which gives them administrator privileges.
2. Base 00 is a primary base. All handsets must register to Base
00.
De-registration
You can de-register a handset from a base. De-registration will reset the handset ID
to 00, erase the system security code, and free up the old ID for future registration.
After deregistration, the handset will not be able to use the base to make or receive
phone calls, nor can it use the intercom to reach other handsets.
1.
Press MENU (right soft key) on the handset.
2.
Press 6 on the handset to enter the handset registration menu.
3.
Press and hold the base’s REG button for 2 seconds until L1, L2, L3, and L4
LED come on
4.
Press 2 on the handset to complete the de-registration process. Upon
successful de-registration, the handset will display ID “00.”
Notes:
3. The base has a 30-second registration timeout (starting from
depression of the REG button). The handset has a 12-second
registration timeout (starting from the time registration or de-
registration option has been selected). The base and handset
will automatically exit registration mode after timeout.
4. Repeat registration or de-registration process if unsuccessful.
Advanced Registration (Register to PRO base only)
Advanced registration functions can be performed with administrator handsets (ID
10 and 11) only.
Administrator handsets can be used for advanced registration functions as long as
~36~
they are within range of the base station. The base station does not need to be in
registration mode.
De-register a handset ID by administrator:
1.
Make sure that the administrator handset is within the coverage range of the
base station.
2.
Press administrator handset’s MENU (right soft key)
3.
Press 9 to enter the handset administration menu.
4.
Press 1 to enter the system setting menu.
5.
Press 2 and enter the two-digit handset ID to be cleared.
6.
Upon successful de-registration, the handset LCD will display “Done.” If
unsuccessful, it will show “Message not received, try again”.
Obtain a specific handset ID:
If a particular handset ID is preferred over sequentially assigned IDs, the
administrator can “tell” the base what the next ID assignment should be.
1.
Press the administrator handset’s MENU (right soft key).
2.
Press 9 to enter the handset administration menu.
3.
Press 1 to enter the system setting menu.
4.
Press 5 and enter the two-digit handset ID to be assigned next by the base.
5.
If successful, the handset LCD will display “Done;” otherwise it will show
“Message not received, try again.”
6.
If the handset ID is already in use by another handset, the administrator will be
alerted. In that case, the administrator can choose another ID or ask the
handset having the desired ID to vacate by de-registering with the base.
7.
Perform registration of the appropriate handset immediately after
programming the ID to ensure that the ID is not assigned to another handset.
Remotely register a handset:
1.
If the base is installed in the ceiling or other unreachable location,
administrator handsets can perform remote registration.
2.
Press the administrator handset MENU (right soft key)
3.
Press 6 to enter registration mode.
4.
Press 3 until the L1, L2, L3 and L4 LED come on.
5.
Proceed with the handset registration process for additional handsets.
Notes:
1. De-registration by the administrator will disable a handset’s ability to use the
base station to make or receive phone calls. This also frees up the ID for future
registration.
2. Handsets de-registered by the administrator can still make intercom calls to
~37~
other handsets.
Handset Group Subscription
Up to seven handset groups (01-07) can be defined and registered to the PRO base.
Individual handsets can decide which group(s) they want to join.
For example, if group 1 is the Customer Service group, group 2 is the Sales group, and
group 3 is the Marketing group. If handset 11 wants to receive incoming rings for all
Sales and Marketing related calls, handset 11 will need to “subscribe” to group 2 and
group 3.
Group Selection:
1.
Press MENU—5 to enter the handset Settings menu.
2.
Press 2 to enter the Group Selection menu.
3.
Press the ADD soft key and enter a two-digit group
number (01-09) to add membership in a group.
4.
Repeat for all desired groups.
Delete group selections by pressing the DELETE soft key and
entering the group number.
Notes:
1. The handset can change group affiliations at any time.
2. The base (administrator) is not responsible for group
assignments. Consequently, it cannot de-subscribe a handset
from a group.
Call Transfer (Register to PRO base only)
While a telephone call is in progress, you can place the call on hold and transfer the
call to another handset.
Press the HOLD soft key to put the call on hold.
Press the OPTION soft key to enter the feature list.
Press 2 and enter a two-digit handset ID to call another handset extension.
10
Settings: 
1. Dial Prefix
2. Group Selection
10
Groups
ADD DELETE
~38~
Un-announced Call Transfer:
Press before the destination handset answers. The call is automatically
transferred to the destination handset.
Announced Call Transfer:
1.
Speak to the destination handset.
2.
Press the XFER soft key or to end the announcement. The call is then
transferred to the destination handset.
Notes:
1. If the destination handset does not answer after handset paging
timeout, the call is routed back to the originating handset.
2. The above described call transfer” process is for DuraFon PRO handset-
to handset call transfers.
3-Way Conferencing (Register to PRO base only)
While a telephone call is in progress, you can place the call on hold and bring in
another phone line or another handset for a 3-way conference.
1.
Press HOLD (right soft key) to put the current call on hold.
2.
Press OPTION (right soft key) to enter selection menu.
3.
3-Way Conferencing with a second handset:
a.
Press 2 and enter a two-digit handset ID to call another handset
extension.
b.
After the second handset answers, press CONF (left soft key).
c.
Two handsets and one phone line can now talk simultaneously. Any one
party can drop out of the 3-way conferencing, leaving the remaining two
parties still connected.
4.
3-Way Conferencing with a second phone line:
a.
Press 1 and enter a phone number to call another phone line.
b.
After the second line answers, press CONF (left soft key).
c.
One handset and two phone lines can now talk simultaneously.
●
If one phone line hangs up, the handset continues talking to the
remaining phone line.
~39~
●
If the user presses , the 2nd phone line will be dropped. The
handset and the first phone line continue conversation.
Notes:
1. 3-way conferencing between 3 handsets is not supported.
2. Unlike 3-way conferencing provided by the phone company, 3-way
conferencing involving 2 phone lines will take up two physical lines, leaving
only two lines left available for other handsets. The handset must have access
to a second line.
Base Select (Register to PRO base only )
A handset can manually select the desired base station before
accessing an outbound line.
1.
Press MENU (right soft key).
2.
Press 5 to enter the handset Setting menu.
3.
Press 3 to enter Base Select mode.
4.
Use the Up/Down key to scroll between on and off.
5.
Make a selection (default = off), and press SAVE (left soft key).
Notes:
1. When Base Select is on, you must a enter 2-digit Base ID after pressing .
2. The handset must be in range of the base station to initiate this procedure.
Call Waiting (Register to PRO base only)
A handset on an active call can be informed of the arrival of a new incoming phone
call.
For example: Handset 15 has an active call on Line 1. A new call comes in on Line 4.
The call is sent to handset 15 (because the caller enters extension number “15”
when prompted, or the call is set to be routed to handset 15 when AA is disabled).
The base station recognizes that handset 15 is busy. Instead of announcing to Line
4 that handset 15 is busy, the base sends an alert to handset 15.
Upon receiving the alert, the handset sounds an audible double-beep alert and the
LCD displays “New call on Line 4.”
~40~
Handset 15 can:
a. Ignore the new call; continue talking to Line 1.
b. Press Switch to switch to Line 4.
c. Subsequent pressing of will toggle between Line 1 and Line 4.
d. Pressing while talking to either line will terminate that call and
automatically connect to the remaining line.
Notes:
1. This built-in call waiting is separate from the call waiting feature available from
the local phone company. The phone company provides call waiting switching
on one phone line, while DuraFon’s call waiting functions on two separate
phone lines.
2. This feature only works for 2 lines. If a third phone call comes in for the same
handset, the call will not be routed to the handset.
3. When establishing service with a local phone company, it is recommended to
order the “hunt group” feature for all your lines rather than the call waiting
feature.
Auto Attendant (AA) (Register to PRO base only)
When enabled by the administrator, an automated attendant will greet an
incoming telephone call.
The caller will be prompted by the greeting message to enter a two-digit
extension number (handset ID) or press 0 for operator.
The greeting message is user-programmable. The handset ID that is
designated as the operator is also user programmable.
●
Default greeting/main outgoing message (OGM): “Please enter the
extension number or press 0 for the operator.”
●
Default operator: handset 10.
If the caller enters an invalid ID (no registered handset with that ID), the AA
will ask for another handset ID with the announcement (OGM2): “The
extension you entered is invalid, please try another extension or press 0 for
the operator”.
If there is no entry timeout, the AA will announce (OGM3): “Please hold;
your call is being transferred to the operator,” and automatically ring the
~41~
operator handset.
If the destination handset does not answer (busy, power off, or out of range)
after handset paging timeout, the AA prompts the caller for another
extension number by announcing (OGM5): “The extension you’ve entered is
busy or not available. Please enter another extension number or press 0 for
the operator”
If the 2nd try is still not successful, the AA will announce (OGM4): “Sorry,
nobody can answer your call right now. Please try again later, goodbye,”
then disconnect the call.
When the DURAFON PRO base station is connected to wired PBX
extension lines, calls addressed/routed to the AA operator can be sent back
to the operator of the wired PBX system. From an administrator handset, a
user can program up to 10 keys/digits to transfer the calls back to the wired
PBX. This feature can only be enabled and pre-programmed by an
administrator handset (handset ID 10 or 11). Consult with the wired PBX
manual for operation instructions and the correct key sequence for transfer
calls to the operator from an extension.
Notes:
1. Intercom calls are not routed by the Auto Attendant.
2. Routing messages OGM 2,3,4 and 5 are not user programmable.
3. The timeout for entering an extension number is 5 seconds.
4. Calls can be routed to either a handset ID or an extension number of the wired
PBX system. There can be only one operator for the AA, which is either a
DURAFON PRO handset or the wired PBX operator.
5. Call routing is limited at two transfers. That is, if both the 1st and the 2
nd
handsets do not answer, and the operator does not answer, the call will be
terminated.
nced Operations
AA Configuration by Administrator (Register to PRO base only)
An administrator can change the following AA settings:
●
Record/playback a new main greeting message.
●
Set the number of rings before AA picks up a call.
●
Turn on/off the AA line-by-line.
●
Set the designated handset ID for AA disabled line(s). When AA is
disabled for a particular line, that line can be dedicated to either an
individual handset ID (10-99) or a group ID (01-07), which can then use
that line for incoming and outgoing calls.
~42~
●
Designate a handset to serve as operator. This handset will answer un-
routable calls or calls during which the caller chooses “Operator.”
Change AA Parameters (Register to PRO base only)
1.
From an administrator handset (handset 10 or 11), press MENU
(right soft key).
2.
Press 9 to enter the administration menu.
3.
Press 3 to enter the AA setting menu.
4.
Press 1 and follow instructions to record a new greeting message.
5.
Press 2 to play back the current greeting message.
6.
Press 3 to set the number of rings allowed before the AA picks up a call. Use
the Up/Down key to choose between 2 and 9 rings.
7.
Press 4 to turn AA On/Off. This can be done separately for each phone line
by using the Up/Down key to scroll through Line 1 to Line 4, and press On or
Off soft key to turn AA On/Off. If turning off the AA may be useful when the
line is not used by a group of people, or when an external answering
machine is to be attached to the line.
8.
Press 5 and select from the following two options to set an operator
handset for the AA:
a.
Handset: assign a specific handset as operator by entering a two-digit
handset ID (default=Handset 10) as operator for all calls addressed to the
operator when AA is on.
b.
PBX: transfer calls to be answered by the operator back to the
designated wired PBX operator. System administrators must know the
proper programming and call transfer feature code (available from the
user manual of the wired PBX system) in order to perform this function
correctly.
Example: route a call back to the PBX system by pressing “ — 7 — 0
— 1 — 8 — 3 — 0 .” (Press the Flash, then the call transfer code “70,”
immediately followed by the extension number “1830.” Confirm the set
up using the SAVE (left soft key).
Notes:
1. Only an administrator can change AA settings.
2. Because AA settings are stored on the base station, the handset must be in
range of the base to make changes.
3. The maximum recording time for the greeting message is 128 seconds.
4. Allowing each line’s AA to be turned on or off separately is useful if different
lines are used for different purposes.
5. When AA is disabled, the line can be dedicated to either an individual handset
~43~
ID or a group ID.
6. The operator can be any individual handset or a group; it doesn’t need to be
an administrator handset (handsets 10 and 11).
7. The minimum number of rings before the AA picks up cannot be lower than
two for the purpose of receiving the Caller ID message.
Line Dedication (Register to PRO base only)
Line dedication function can be performed by administrator handsets (IDs 10 and
11) only.
(By default all incoming calls will ring all handsets.)
Press MENU— 9 — 2 — 2 for the Line Dedication setting.
The LCD will first show line 1 and line status. If you wish to dedicate line 1 to a
specific handset or group, you need to press OK. To select lines 2–4 use
the
Up/Down key
.
After choosing a line, the display will read YES and NO. Select YES, to enter the
appropriate handset ID or group ID. If you choose NO, it will go back to Line Setting
menu.
Notes:
1. When entering the line dedication setting, the LCD will show the current selected
line and status. If the line is already dedicated to a specific handset or group, the
display will indicate the handset or group ID. If the line isn’t dedicated to a
specific handset yet, the display will read “ALL HS.”.
2. When setting up line dedication, make sure the handset or group ID is correct to
avoid losing calls sent to a DuraWalkie handset or invalid ID.
3. Handsets dedicated to a port will receive calls from non-dedicated lines as well as
the handset’s dedicated line. Use line dedication for separate groups on other
lines to further manage calls.
Line Selection (Register to PRO base only)
Press MENU— 5— 8 while the phone is in standby to enter the Line Select menu.
Use the Up/Down key to switch between On and Off settings; the default is Off.
If Line Selection is set to On, the handset LCD display will prompt a user placing a
~44~
call (with or by entering a phone number and pressing
)
to “Select Line”
and will show available options (1–4). Select from one of the available lines (i.e.
press 1 to select line 1 and press 2 to select line 2).
This feature is also supported when selecting a second line during call conferencing.
Change System and Line Settings by Administrator (Register to PRO
base only)
Several system parameters can be changed by the administrator..
From an administrator handset (10 or 11):
1. Press MENU (right soft key).
2. Press 9 to enter the administration menu.
3. Press 1 to enter the system setting menu.
a. Dial Tone:
Press 1 to set up the dial tone to be either “Tone” or “Pulse.” Press 1 to
choose “Tone” or press 2 to choose “Pulse.”
b. Flash Time:
Press 2 to set up the flash time from 100ms, 200ms, to 900 ms (9 levels to
choose from.) For example, press 2 if the desired flash time is 200ms.
c. Line Detect:
Press 3 to set up the line detect to be either “On” or “Off.” Press 1 to
choose “On” or press 2 to choose “Off.”
d. Clear Handset ID:
Press 4 and enter a two-digit handset ID when prompted to clear this ID
for later assignment.
e. Set Next Handset ID:
Press 5 and enter a two-digit handset ID when prompted. This is the ID
that will be given out by the base to the next handset registering with the
base.
4. Press 2 to enter the Line Setting menu.
a. Enter the Base ID (00–07) to access base.
b. Press 1 to enter the broadcast setting menu.
Press OFF (right soft key) to disable broadcasting function
Press ON (left soft key) to enable broadcasting function.
c. Press 2 to enter Line Dedication setting.
Select the base’s line and press CHANGE (right soft key)
Line Dedicate confirm:
Press NO (right soft key) to go back to the Line Setting Menu.
Press YES (left soft key) then enter the extension number.
~45~
Note:
De-registration by the administrator will disable a handset’s ability to use the
base station to make or receive phone calls. This also frees up the ID for future
registration.
Phonebook Operations (Register to PRO base only)
1.
You can store up to 90 entries in the phonebook. Each entry can contain a
phone number or handset ID (up to 28 digits) and a name (up to 14 characters).
(On a DuraWalkie, each entry can store 2 digits; a handset ID or a group ID.)
2.
To access the phonebook, press MENU followed by 2 or scroll with the
Up/Down key when the handset is in standby mode.
3.
To add a new entry:
a.
Press the ADD soft key.
b.
Enter a phone number when LCD prompts “Number?” Use the DELETE soft
key to delete the last digit entered. Press SAVE when the number is
complete.
c.
A prompt will appear requesting a name corresponding to the phone
number.
(1)
Press SAVE to save the phone number without a name. All records
without a name will be placed on top of the list, in the order in which
they are entered.
(2)
To enter the name, press the corresponding keypad number one or
more times according to the order of the character on the key.
(3)
Use DELETE to delete the last character entered. When completed,
press SAVE to confirm your selection.
Notes:
1. When entering a phone number, the cursor automatically advances to the
next digit field. Use the Up/Down key to move the cursor backward or
forward to insert or delete.
2. When entering a name, the cursor automatically advances to the next
character field if you press a different key for the next character. If you need
to enter consecutive characters from the same key, you can wait for the cursor
to advance or use the Up/Down key to move the cursor backward or forward
manually. Also use the Up/Down key to move the cursor to insert or delete.
~46~
3. By default, all letters are entered in the upper case. Use ＊ to toggle between
upper and lower cases.
4. A “Pause” entry represents a 2.8 second delay in dialing the following digits,
which is useful when calling a sequence of segmented numbers (e.g., access
code, credit card number, auto-attendant entries, etc.) Pause is entered by
pressing ＊ twice (the LCD displays P). Entering pause twice (PP) will result in
5.6 seconds pause in the dialing.
4.
Entries are alphabetically sorted and stored as a list in ascending order (A
to Z) from the top of the list.
a.
If the phonebook is entered from the menu, the first entry displayed is
from the top of the list.
b.
If the phonebook is entered by pressing “Down.” the first entry
displayed is from the top of the list.
c.
If the phonebook is entered by pressing “Up,” the first entry displayed
is from the bottom of the list.
5.
The first line of the LCD display shows the name and the second line shows
the phone number. If the phone number is longer than 14 digits, press
OPTION and select Option 3 to view the complete number.
6.
To search for a record:
a.
Use the Up/Down key to enter Phone Book mode.
b.
Press a key that corresponds to the first character of the name you are
looking for.
c.
For example, to search for “EnGenius,” press 3 once.
d.
Use the Up/Down key to locate the exact record you are looking for.
7.
To erase a phonebook entry:
a.
Use the Up/Down key or the alphabetical search method to locate the
record to be erased.
b.
Press OPTION to enter the editing menu.
c.
Press 1 to erase the designated phone entry.
d.
The LCD will ask, “Are you sure?” Press YES to confirm your change.
8.
To edit a phonebook entry:
a.
Use the Up/Down key or the alphabetical search method to locate the
record to be edited.
b.
Press OPTION to enter the editing menu.
c.
Press 2 to edit the designated phone entry.
9.
Dial from display:
~47~
a.
Press or to dial the phone number or handset ID displayed.
10.
To transfer a phonebook:
To transfer a phonebook, both parties first have to enter phonebook
transfer mode:
a.
Press OPTION— 4 or use the Up/Down key when the handset is in
phonebook mode.
b.
Sending the phonebook: press 1 to enter sending mode.
(1) Either press TX ALL (left soft key) to transfer all phonebook entries
to another handset(s), or press TX ONE (right soft key) to transfer
one entry to another handset(s).
(2) Press the 2-digit handset ID or group ID of the recipient(s), then
select phonebook entry or entries to be transferred.
Re : “00” means all handsets
(3) During phonebook transfer, the LCD will display “Sending” a and 2-
digit countdown indicating the number of phonebook entries
waiting to be sent.
c.
Receiving the phonebook: press 2 to enter receiving mode.
(1) When the handset enters receiving mode, the LCD will show
“Ready”.
(2) When the handset is ready to receive the phonebook, the LCD will
display “Get phonebook from Ext. # : xx.”
(3) As each entry is received, the handset will beep.
(4) A 2-digit countdown on the LCD will indicate the number of
phonebook entries waiting to transmit.
Interference on a wireless network may cause errors in phonebook
transmission. If this occurs, the LCD will display the message:
“Error! Bookmark not defined.”
~48~
Notes:
Character Table:
Key
Characters and Orders
1
‘ + , . ＊ ( ) & 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
＊
Toggle case when in character editing
＊ P (Pause) when in number editing
#
Space – when in character editing
# when in number editing
~49~
Programmable PBX Options (Register to PRO base only)
When the DuraFon PRO base unit is installed behind a PBX
system, it is feasible to pre-program some PBX features along
with their feature codes into the system.
Up to nine frequently used PBX feature codes can be pre-
programmed.
To name and enter PBX feature codes:
1.
Press MENU (right soft key) while the handset is in standby.
2.
Press 5 followed by 9 to enter the “PBX Options”
menu.
3.
Press ADD to edit a PBX feature to be programmed.
4.
Key in the name of the PBX features (see procedures for
editing a phonebook entry; e.g., PBX Transfer.
Press SAVE to confirm your entries.
5.
Key in the feature code of the corresponding
PBX feature; e.g.,“Flash*70”. Press SAVE to confirm
the entry.
6.
The first PBX feature and the corresponding
feature code you enter will appear on the LCD
screen. (In the LCD display, “F” represents the Flash signal.)
7.
Press OPTION to Erase or Edit the PBX
feature you program into the system.
8.
Repeat the same operation to edit the second and
even the third PBX feature that you will use
frequently.
To use pre-programmed PBX features during a call:
1.
Press OPTION while the handset is in
talk mode .
2..
Press the number of the function
you want to perform; e.g., press 1 to perform “PBX
Transfer” function.
3.
Press to return to standby mode.
10
Settings: 
8. Line Select
9. PBX Options
10
Empty
ADD
10
Feature Name?
Caps = *
SAVE DELETE
10
Feature Code?
SAVE DELETE
10
PBX Transfer
F*70
ADD OPTION
10
00:00:16
Volume:4
OPTION HOLD
11
1. PBX Transfer
0. Mute
~50~
Notes:
1. This feature will be especially useful if the DuraFon PRO base
unit is connected to a PBX system.
2. Only the “Mute” function will be displayed if you have not
preprogrammed any PBX features into the system.
3. The DuraFon PRO’s programmable PBX options may not function
with all PBX/Key systems due to the diversity of various
proprietary systems.
Broadcast through PBX (Register to PRO base only)
DuraFon PRO and DuraWalkie both have the broadcast function,
enabling them to broadcast to another handset without going through
the base station as long as the handsets are registered to the same
system However, when setting up a multi-base system, the broadcast
feature may not be available due to the coverage range. In that case,
you can use “Broadcast through PBX” to broadcast.
From an administrator handset (handset 10 or 11):
1.
Press MENU(right soft key).
2.
Press 9 to enter the administration menu.
3.
Press 2 to enter the Line Setting menu.
a.
Enter Base ID (00–07) to access base.
b.
Press 1 to enter Broadcast settings.
(1) Press the Up/Down key to select L3 or L4 (The current
status will be displayed on the LCD.)
(2) Press CHANGE to enter the setting mode; the base ID will
be displayed on the LCD.
(3) Press On (left soft key) to enable the broadcast function.
Press Off (right soft key) to disable the broadcast function.
(4) After enabling broadcast, press On (left soft key) to enable
the AA. Press Off (right soft key) to disable the AA.
(L3 and L4 can each be set as broadcast lines. Repeat the
steps above to enable the second broadcast line.)
When calling through line 3 or 4, the caller will be prompted by the
greeting message to enter a two-digit extension number (01 –07 for
group ID; 10–99 for handset ID; 00 for all).
●
The greeting message is “Please enter the extension
~51~
number.”
●
If there is no entry after 5 seconds, the broadcast will be
pushed to all handsets.
Notes:
1. Lines 3 and/or 4 can be reserved for the broadcast function.
2. For a single broadcast port, reserve line 3 for broadcast and dedicate (see pg.
46) line 4 to a non-existent handset (e.g., 99).
3. With a base unit configured with a single broadcast port, lines 1 and 2 may be
used as standard telephone ports or lines.
4. For dual broadcast ports, reserve lines 3 and 4 for broadcast and dedicate lines
1 and 2 to a non-existent handset (e.g., 99).
5. Broadcast is limited to 30 seconds.
~52~
UHF Frequencies and Codes
1
These freqency display numbers are equivalent to Motorola CLS/CPL
frequency positions. Each bandwidth uses 12.5KHz.
Display
Number
Frequency
(MHz)
1
464.5000
2
464.5500
3
467.7625
4
467.8125
5
467.8500
6
467.8750
7
467.9000
8
467.9250
9
461.0375
10
461.0625
11
461.0875
12
461.1125
13
461.1375
14
461.1625
15
461.1875
16
461.2125
17
461.2375
18
461.2625
19
461.2875
Display
Number
Frequency
(MHz)
20
461.3125
21
461.3375
22
461.3625
23
462.7625
24
462.7875
25
462.8125
26
462.8375
27
462.8625
28
462.8875
29
462.9125
30
464.4875
31
463.5125
32
464.5375
33
464.5625
34
466.0375
35
466.0625
36
466.0875
37
466.1125
38
466.1375
Display
Number
Frequency
(MHz)
39
466.1625
40
466.1875
41
466.2125
42
466.2375
43
466.2625
44
466.2875
45
466.3125
46
466.3375
47
466.3625
48
467.7875
49
467.8375
50
467.8625
51
467.8625
52
467.9125
53
469.4875
54
469.5125
55
469.5375
56
469.5625
2
These intererence eliminator codes display numbers are equivalent to
Motorola CLS/CPL. display numbers. “0” disables interference elimiator codes.
Display
Number
Code
(Hz)
1
67.0
2
71.9
3
74.4
4
77.0
5
79.7
6
82.5
7
85.4
8
88.5
9
91.5
10
94.8
Display
Number
Code
(Hz)
11
97.4
12
100.0
13
103.5
14
107.2
15
110.9
16
114.8
17
118.8
18
123.0
19
127.3
20
131.8
Display
Number
Code
(Hz)
21
136.5
22
141.3
23
146.2
24
151.4
25
156.7
26
162.2
27
167.9
28
173.8
29
179.9
30
186.2
~53~
Display
Number
Code
(Hz)
31
192.8
32
203.5
33
210.7
34
218.1
Display
Number
Code
(Hz)
35
225.7
36
233.6
37
241.8
38
250.3
Display
Number
Digital
Code
39
023
40
025
41
026
42
031
43
032
44
043
45
047
46
051
47
054
48
065
49
071
50
072
51
073
52
074
53
114
54
115
55
116
56
125
57
131
58
132
59
134
60
143
61
152
62
155
63
156
64
162
65
165
66
172
Display
Number
Digital
Code
67
174
68
205
69
223
70
226
71
243
72
244
73
245
74
251
75
261
76
263
77
265
78
271
79
306
80
311
81
315
82
331
83
343
84
346
85
351
86
364
87
365
88
271
89
411
90
412
91
413
92
423
93
431
94
432
Display
Number
Digital
Code
95
445
96
464
97
465
98
466
99
503
100
506
101
516
102
532
103
546
104
565
105
606
106
612
107
624
108
627
109
631
110
632
111
654
112
662
113
664
114
703
115
712
116
723
117
731
118
732
119
734
120
743
121
754
~54~
Menu Operations (Register to
PRO base only)
Main menu
Sub-menu
1.KeyGuard
2.PhoneBook
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
4.Key Tone
1.Dial Prefix
2.Group Select
3.Base Select
4.Clear
5.Naming
6.Contrast
7.Backlight
8.Line Select
9.PBX Options
0.Language
#.Walkie-Talkie
*.Name Tag
6.Registration
7.BC/INT Type
5.Settings
4.Sound
3.Call Logs
9.Admin
8.Multi-base
Select Mode:
1.Add Base
Admin:
1.System
2.Line Setting
3.Auto Attndnt
1.Register
2.Deregister
3.Remote REG
1.WT On/Off
2.PA On/Off
~55~
1. Press MENU (right soft key) while the phone is in standby.
2. Press 1 to lock keypad (see KeyGuard).
3. Press 2 to view, search, erase, edit and transfer the phonebook (see
Phonebook).
4. Press 3 to view the last 10 numbers called, received, or missed. Records can
be erased or edit/saved to the phonebook.
a. Press 1 to view the last 10 phone numbers dialed, starting from the most
recent. Use the Up/Down key to scroll through the list. Press OPTION
(right soft key) for options:
Press 1 and confirm to erase the current record.
Press 2 to edit and save or save without editing into the
phonebook.
Press 3 to view the complete number if the phone number is
longer than 14 digits.
b. Press 2 to view the last 10 phone numbers received, starting from the
most recent. Use the Up/Down key to scroll through the list. Press OPTION
(right soft key) for options:
Press 1 and confirm to erase current record.
Press 2 to view the arrival date and time of the call.
Press 3 to edit and save or save without editing into the
phonebook.
c. Press 3 to view the last 10 phone numbers received but not answered,
starting from the most recent. Use the Up/Down key to scroll through the
list. Press OPTION (right soft key) for options:
Press 1 and confirm to erase current record.
Press 2 to view the arrival date and time of the call.
Press 3 to edit and save or save without editing into the
phonebook.
The two-digit index on the upper right corner of the LCD display shows the call log
location in ascending order, with 01 being the most recent call.
While viewing any of the three call logs, press DIAL (left soft key) to dial the
phone number.
Notes:
1. Only phone numbers are stored in the three call logs. Intercom calls are not
recorded.
~56~
2. Caller ID service is required from your local phone company in order to
receive phone numbers, names and time stamps on incoming calls. The
Received and Missed Call Logs will register no incoming calls if caller ID
service is not available.
3. The caller ID feature may not be supported by all PBX or Key systems’ analog
ports, check with your equipment provider
5. Press 4 to set sound-related settings:
a. Press 1 to select ringer volume: Use the Up/Down key to scroll through six
options: Low, Medium, High, Vibrate, Vibrate and Ring, Off. Press SAVE
(left soft key) to save selection. The default setting is High.
b. Press 2 to select ringer tone: Use the Up/Down key to scroll through four
options: 0, 1, 2, and 3. Press SAVE (left soft key) to save selection. The
default setting is 0.
c. Press 3 to select the key volume when a key is pressed: Use the Up/Down
key to scroll through 3 options: High, Low, and Off. Press SAVE (left soft
key) to save selection. The default setting is Low.
d. Press 4 to select the key tone: Use the Up/Down key to scroll through four
options: 0, 1, 2, and 3. Press SAVE (left soft key) to save selection. The
default setting is 0.
6. Press 5 to change handset settings:
a. Press 1 to set the dialing prefix:
Use the Up/Down key to scroll and select on or off for the dialing prefix
feature. The default setting is Off.
If “On” is selected, the handset is prompted to enter a prefix, up to 14
digits.
To enter a prefix, use DELETE (right soft key) and the Up/Down key to
edit.
When the dialing prefix feature is turned on, for each outgoing phone
call (except during redial or dialing by pressing
)
the LCD will ask
the user whether to use the dialing prefix. The current prefix will be
displayed. Press YES (left soft key) add the prefix to the beginning of
the number or NO (right soft key) to leave it out..
This feature is especially useful for access code, calling card, and credit
card calls.
b. Press 2 to select a group. See Handset group Subscription.
c. Press 3 to turn Base Select on or off. The default setting is Off. See Base
Select.
d. Press 4 to clear the call logs and phonebook:
Press 1 and confirm to delete the entire phonebook.
~57~
Press 2 and confirm to clear the three call logs (Called, Received, and
Missed).
e. Press 5 to edit the name of a customer or line:
e-1. Press 1 to change the power-up LCD display. (Show, for example, the
customer name or other greeting message.
e-2. Press 2 to change the name of a line. When a call comes in, the LCD
will indicate the originating line.
Use the Up/Down key to move the cursor backward or forward to
insert (the character to the left of the cursor) or delete (the character
above the cursor, or to the left of the cursor if the cursor is to the right
of the last character).
Enter characters using the character table and method discussed in
the Phonebook section of this manual.
Press SAVE (left soft key) to save the change.
f. Press 6 to change the LCD display contrast:
Use the Up/Down key to scroll through values 1 to 8. Choose one that
is most suitable to you. The default setting is 6.
Press SAVE (left soft key) to save the setting.
g. Press 7 to change the LCD backlight setting:
Use the Up/Down key to scroll through three options: On, Off, and 20
Seconds. The default setting is 20 seconds (the backlight will
automatically turn off after 20 seconds of inactivity).
Press SAVE (left soft key) to save the setting.
h. Press 8 to change the line selection setting:
Use the Up/Down key to toggle between On and Off. The default
setting is Off. When line selection is off, the call will default to the first
available line.
Press SAVE (left soft key) to save setting.
i. Press 9 to change the PBX options:
Press ADD to edit a PBX feature. Key in the name of the PBX features
just like editing a phonebook entry.
Press SAVE (left soft key) to save the setting.
Press OPTION and 1 followed by entering PBX options mode to erase
the PBX option.
Press OPTION and 2 followed by entering PBX options mode to edit
the PBX option.
Press OPTION and 3 followed by entering PBX options mode to
transfer the PBX options to other handset(s).
To transfer PBX Options, both parties have to enter the PBX Option mode:
~58~
Sender:
(1) Press 1 to enter sending mode.
(2) Either press TX ALL (left soft key) to transfer all PBX options to
another handset(s), or press TX ONE (right soft key) to
transfer a specific entry to another handset(s).
(3) Press 2-digit handset ID or group ID, then select all PBX
options or a specific entry to be transferred(“00” means all
handsets)
While the PBX options are transmitting, LCD shows “Sending”, a 2-digit
countdown on the LCD indicates the number of PBX options in the
queue.
Recipient:
(1) Press 2 to enter receiving mode.
(2) Once the handset is in receiving mode, the LCD shows
“Ready”.
(3) When you start to receive PBX options, the LCD shows “Get
PBX options from Ext. # : x ㎜ x.”
While the PBX options are transmitting, a 2-digit countdown on the
LCD indicates the number of PBX options in the queue.
j. Press 0 to change Language:
Use the Up/Down key to scroll through options: English and
Portuguese. Default = Portuguese, meaning the LCD display shows in
English.
Press SAVE (left soft key) to save setting.
k. Press # to set Walkie-Talkie operation:
(1) Press 1 to enable/disable PTT key for UHF WT (walkie-talkie)
(2) Press On (left soft key) to turn on the UHF WT function which could
receive and transmit the broadcast via UHF band. Press Off (left soft key)
to turn off the UHF WT function. The PTT key is used for digital band.
Notes:
1. Different PBX makers use different analog codes to control PBX
function, like call transfer, call park, etc.; Please refer to your PBX
maker’s manual for this information.
2. Errors may occur in PBX options and phonebook entries transferred
wirelessly due to interference. Please re-enter manually if problems
occur with an entry.
~59~
(3) Press 2 to turn Broadcast On/Off:
Press On (left soft key) to turn on the broadcast function (including the
broadcast of handset to handset and base to handset).
Press Off (left soft key) to turn off the broadcast function. When
Broadcast setting is “Off”, there is an icon indicated in the display, side
of the battery icon.
(4) Press * to turn Name Tag On/Off:
Press On (left soft key) to turn on the name tag function, when
receiving the incoming calls, the LCD will show the name which stored
in phonebook.
Press Off (left soft key) to turn off the name tag function.
7. Press 6 to register or de-register a handset: See Handset Registration.
8. Press 7 to set up the intercom or broadcast via repeater (see Repeater Setup).
9. Press 8 to add new bases. From an administrator handset (Handset 10 or 11)
you can add new bases 01–07. Maximum number of bases is eight (including
master base 00). Before adding a new base, the handset must be registered to
the master base (Base ID =00).
a.
Press REG button on new base.
b.
Use Handset 10 or 11 to Add base: Press MENU— 8 — 1.
c.
Enter 01–07 (base ID).
10. Press 9 to change system and Line setting: See System and Line Setting.
~60~
Technical Specifications
General Specifications
Phone Mode
Walkie-Talkie
Mode
Frequency Range
902–928 MHz
461–469.5 MHz
Channel Number/Capacity
50
5 for UHF;
1 for 900 MHz
Channel Spacing
400 kHz
12.5 kHz
Number of System ID
65,535
NA
PL Codes
NA
38
DPL Codes
NA
83
Multiple Access
Frequency
Hopping TDMA
FDMA
Duplex
Time Division
Duplex (TDD)
Half Duplex
Frequency Hopping Rate
100 per second
NA
TDD Frame Length
10 ms
NA
Number of Slots/Frame
8
NA
Channel Coding
½ rate
Convolutional +
CRC
NA
User Data Rate
128 kbps Duplex
NA
Antenna Gain
0 dBi
2 dBi
Antenna Connector
Reverse SMA
Average Battery Life
90 hours
(Walkie Off)
27 hours
(5/5/90)
Power Source
3.7V/2300 mAh Li-Ion Battery
Charge Current
850 mA
Charge Time
4 hours
Regulation Compliance
FCC Part 15
FCC Part 68
RSS-210
CS03
FCC Part 90
Operating Temperature
-10–+60 °C
Charging Temperature
0–+40 °C
Storage Temperature
-40–+70 °C
Humidity
0 % –95 %
IP Rating
IP55
Dimensions without Antenna (H x W x D)
142 x 60 x 38mm
Weight
256.5 g
Notes:
~61~
1. NA = Not Applicable.
2. The manufacturer reserves the right to change designs and specifications without
notice.
~62~
Index
2
2-WAY INTERCOM, 15
3
3-Way Conferencing, 38
A
Adjusting Receiver (Earpiece)
Voice Volume, 29
Administrator Features, 18
B
Battery, 6, 11, 14, 17, 21, 22,
23, 31, 60
Broadcast, 15, 18, 23, 26, 27,
45, 50, 51, 52, 59, 60
Broadcast through PBX, 50
Broadcasting a group of
handsets, 26
Broadcasting an individual
handset, 27
C
Call Conferencing, 18
Call Hold, 17
Call in-progress, 14
Call timers, 17
Call transfer, 18, 19, 37, 38
Call Waiting, 15, 39, 40
Caller ID, 16, 17, 28, 43, 56
Cardiac pacemaker, 4
Charger Features, 21
D
De-registration, 35, 45
DND, 17
Do Not Disturb (Silent Ring), 30
DTMF, 18
E
Electric shock, 5
Equipment Checklist, 11
F
FCC, 7, 8, 9, 64
FDA, 4
Flash time, 19, 44
G
Group ID, 15, 43, 47, 59
H
Handset and charger
installation, 22
Handset charging slot, 21
Handset features, 14, 16
Handset Group Subscription,
36, 57
Handset ID, 14, 27, 28, 29, 34,
35, 36, 37, 38, 40, 41, 42, 43,
50
Handset Registration, 22, 34,
60
Handset to Handset Calls, 26
Hearing Aid, 4
I
Idle mode, 23
K
KeyGuard, 30, 31, 56
Key tone, 17
L
Line Dedication, 43
Line Indicator, 14
Line Selection, 44
M
Multiple handset registration,
16
P
Phonebook, 45
R
Registration, 34
Regulatory Information, 7
REN, 64
Ringer, 15
RSSI, 14
S
Safety Instructions, 4, 6
~63~
Speaker phone, 14
T
Technical Specifications, 61
Three Call Logs, 17
To Call back from Call Log, 31
To View Missed Call(s), 31
Two-Digit Address Index, 14
V
Vibrator, 16
~64~
FCC Part 68 Statement
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of DuraFon PRO base station is a label that
contains, among other information, a product identifier in the format US:
SNIW403BFS2. If requested, this number must be provided to the telephone
company.
Applicable connector jack Universal Service Order Codes (“USOC”) for the
Equipment is RJ11C.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. For products approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format US: SNIW403BFS2. The digits
represented by 0.3 are the REN without a decimal point (e.g., 03 is a REN of 0.3).
If this DURAFON-UHF-HC causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may
be required. But if advance notice isn't practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens
the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this DuraFon-UHF-HC, for repair or warranty
information, please contact:
~65~
Company: EnGenius Technologies, Inc.
Address: 1580 Scenic Ave., Costa Mesa, CA 91709
Tel no.: 714-432-8668
If the equipment is causing harm to the telephone network, the telephone company
may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for
information.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this equipment does not disable your alarm equipment. If
you have questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
WHEN PROGRAMMING EMERGENCY NUMBERS AND (OR) MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or late
evenings.
… 23 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Engenius DuraFon-UHF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Engenius DuraFon-UHF in de taal/talen: Engels als bijlage per email.

De handleiding is 2,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info