729080
12
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
23
Additional Base Station Features
Broadcast
A. Broadcasting from Base to Handset
1.
Broadcast to all handsets
a.
Press key on the base station to intercom
all registered handsets.
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage.
c.
The Broadcast LED will light up
d.
Press the key again and return to IDLE
mode
B. Broadcasting from Handset to Base
1.
Broadcast to all
Bases (DuraFon
PSL
-
BU)
a.
Press and hold the key on the handset to
broadcast all handsets and bases.
b. Start to speak the message to be broadcasted once
you hear the “beep” sound; the speakerphone of
the base will be opened up
.
c.
The Broadcast LED
on the bases
will light up
d.
Press the key again and return to IDLE
mode
Intercom Call
A. Intercom/2-Way from Base to Handset
1.
Press key on the base station to intercom all
registered handsets. The first handset to answer will
establish a voice link with the base.
2.
The INTERCOM LED will flash until a handset responds.
3. The base unit will page for 15 seconds, then terminate the page if
no handset responds.
4.
Before a handset answers, the INTERCOM can be cancelled from the
base by pressing again. However, once a handset answers,
only the answering handset can end the call.
11
From BASE 00
Volume: 2
SILENT
11
From BASE 00
Volume: 2
SILENT
11
Incoming page
From Ext#90
SILENT
24
Notes:
1. Due to for comply with existing DuraFon-HC, the display
does not match the behavior. For example, the intercom
call from base to handset, it displays “from Ext #90” instead
of “from Base xx”.
2. No support line detection feature in DuraFon PSL-BU base.
Even you set “Line Det” from an administrator handset
(Handset 10 or 11) via pressing MENU- 9 – 1 –enter base
ID(00–07)- 3 to enable Line Det.
3. In DuraFon PSL-BU base, no support “Auto Attendant.
4. In DuraFon PSL-BU base, no support “3-way Conference”.
5. In DuraFon PSL-BU base, no support “Announced call
transfer
6. In DuraFon PSL-BU base, no support “ call waiting” from
other telephone lines, due to it is only single line.
7. In DuraFon PSL-BU base, no support “Broadcast through
PBX”
Administrator Features
Handsets 10 and 11 are designated administrators. Both have the same
authority to perform base station administrative functions from their
handset menu selections. No password is required.
1.
Supports both DTMF and Pulse dialing(For DuraFon PRO
only
)
a. From an administrator handset (Handset 10 or 11 ), press
MENU- 9 1 –enter base ID(00–07)- 1 to select Tone or Pulse
dialing m
ode.
b.
Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO
only
)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
-
2
to select flash key timing
b.
9
-
level (100 ms
-
900 ms) timing selecti
ons, default=
6
00 ms
.
c. The default value (600 ms) works in most areas. Changing this
setting may result in Flash function not working. Change only
when you are certain the new value will work.
3.
Call Transfer
to PBX Extensi
on(For DuraFon PRO
only
)
a. When the DuraFon PRO is installed behind a PBX system, you
can pre
-
program the feature code of call transfer function.
b.
Need to adjust the Flash time to match your PBX setting.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Engenius DuraFon PSL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Engenius DuraFon PSL in de taal/talen: Engels als bijlage per email.

De handleiding is 1,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info