Handleiding Emtec H510 (pagina 13 van 74) (Nederlands, Duits, Engels, Frans, Italiaans)

473755

Verklein

Vergroot

Pagina terug

1/74

Pagina verder

2524

Select the device you want to learn keys for. In this example we

only have a TV, Cable Box and Satellite Receiver set up, so the rest

are grayed out, but you can still select any of the devices to learn

commands for. In this case we selected TV.

Some typical “extra” keys are already set up, (depending on the

Mode you selected), the rest of them are called L6, L7, L8, etc., 27

keys in total. (You can rename them later). Press the Side Key that

you want to learn a command under. (Note can choose one that

already has a name, so as to “learn over it” and then later rename it).

Let’s select L7.

Note: “Triple tap” name entry works in a similar fashion to text entry on a cell phone. Tap

each numeric key to cycle through ALL caps, numbers, and lower case letters. E.G., repeatedly

pressing the number 2 key cycles through A, B, C, 2, a, b, c. Pressing the 9 key cycles

through W, X, Y, Z, 9, w, x, y, z. A “space” can be selected with the 0 (zero) key. The number

1 key selects 1 . @ ? ! - & : and back to 1. And you can backspace an entry with the key to the

left of the 0 (zero) key. Press OK (or the Enter “E” key) to confirm your new name.

Next point the remote you want to learn commands from at the bottom

of the H510 remote, and press OK when you’re ready. (See Tips on

Learning on page 21).

Next press the key (on the other remote) for the function you want

to learn. Hold the key pressed until the screen says that the command

was successfully learned. Note for some types of key you might

need to hold the key pressed, but for other types a quick press is

sufficient. Experiment a bit. If keys you learn are sent multiple times

try learning them with just a quick press.

You can change the label for the key (in this case L7) .

If you select Change Label, by pressing Side Key K9, you can change

the name to anything you want. For example you’ll likely want to

rename it with the name of the function that you learned.

After you select Change Label you see the screen to the right. You

enter the new name for the key using the numeric keys on the remote,

in a similar fashion to typing in text on a cell phone. See next page.

E.G. in this example we pressed the 3 key on the remote to enter the

letter D. Then we pressed the 8 key repeatedly until the letter V was

displayed. Then we waited a second and pressed 3 to select D. Then

we pressed the 0 (zero) key twice until we selected a space. We

continued this process until we had “DVD Zoom” displayed.

Then we pressed OK to save the new label for the key we had learned.

The next time you set the remote to the mode that you learned this

key under you’ll see a screen where you can select this, and any

other functions you’ve learned under that mode.

Pressing the MODE key and then selecting a device type shows the “extra” keys and learned

keys for that mode. Note, you can learn keys from any kind of remote under any mode. You

could for example learn the power keys for your TV, and your audio system and extra keys

for your DVD player under the DVD mode. Then when you press the MODE key and select

DVD, you’ll be able to turn on your TV, turn on your audio system, and control your DVD

player, all from the Side Keys on this one screen.

Troubleshooting

The Favourites you set up don’t operate your device.

• Make sure you selected the correct device (TV, Cable, Sat, etc., when you set up each

favourite. See Add/Edit Favourites page 14 to change the device type for your favourite(s).

• Change the key Transmit Time, see Display Options on page 18.

The Remote’s hard keys do not operate your product.

• Make sure the remote is set to the correct Mode by pressing the MODE key follow by the

appropriate Side Key for the device mode you desire.

• Program the remote with a new code.

• The remote may not contain the code for your device. Try learning the codes you need

from your old remote.

• Install new batteries.

The remote does not operate some features of your product.

• Program the remote with a new code.

• The remote may not be able to operate all features of your product or key names might be

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Emtec H510 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info