Image 3 – Connections EM7380
1. Power connection: Connection for the power cable (5V)
2. Optical S/PDIF connection: Audio connection to connect to your digital receiver.
3. Composite connections: Used to connect to an analogue television (Yellow is
the video, red and white are audio connections). Or connect the red and white
connections to an analogue receiver.
4. HDMI connection: HDMI 1.4 also knows as HDMI High speed connection. Used
to connect to your HD television or HDMI receiver.
5. Gigabit LAN: Connection used to connect to your (Gigabit) network.
6. USB 2.0 host ports: Used to connect USB devices such as a USB hard disk,
USB memory sticks etc.
7. USB 3.0 host port: Used to connect USB (3.0 )devices such as a USB (3.0)
hard disk, USB (3.0) memory sticks etc.
8. e-SATA port: Used to connect e-SATA devices such as an e-SATA hard disk.
9. Restore: Can be used while performing a firmware update.
4.0 Mounting a SATA hard disk (EM7385)
The following steps describe how to connect a SATA hard disk into the media player.
The EM7385 uses a hard disk locking mechanism which makes it very easy to mount
a hard disk.
1. Take the EM7385 out of the packaging.
2. Open the hard disk slot on the side by pressing the two sliders two each other.
3. Slide out the hard disk locking mechanism.
4. Place a SATA hard disk in the hard disk locking system. The sticker on the hard
disk needs to be on top (facing towards you) and the connections of the hard disk
faces outside the hard disk locking mechanism.
5. If correct, the two screw holes of the hard disk locking mechanism (one at each
side) are exactly aligned with the screw holes of the hard disk itself.
6. Fix the screws into position.
