3
|
ENGLISH
1.1 Functions and features
Turn your living room into a movie theatre! The EM7167 delivers outstanding movie
and sound quality and takes full advantage of your (Full) HD television. You can use
the USB and cardreader interface to play your media, or make use of a built-in SATA
hard disk. Thanks to the HDMI 1.3 support, you will be able to enjoy your movies in
crystal clear Full HD. Your audio experience will be state-of-the-art too, thanks to the
EM7167’s support for stereo sound, AC3, WMA, AAC and DTS (down mix). If you
want to enjoy the sound experience through your digital receiver, simply connect the
HDMI or Toslink cable to your digital receiver and start enjoying.
1.2 Packing contents
The following parts need to be present in the packing:
• EM7167 media player
• Power supply
• HDMI cable
• Break-out cable (AV to composite)
• USB cable
• Remote control
• User Manual
2.0 Mounting a hard disk
It is possible to mount a SATA hard disk into the EM7167. Use the following steps to
do so.
1. Take the EM7167 out of the packaging.
2. Turn the unit so you can see screws at the back.
3. Use the Philips screwdriver to take the screws out.
4. Carefully turn the media player and slide out the front of the media player.
5. You will see a SATA connection on the board you have just taken out of the
casing.
6. Position the SATA hard disk in such a way the SATA connector on both the
board and hard disk are aligned.
7. Slide the hard disk towards the SATA connection on the board. If correct, the
hard disk will ‘click’ into position.
8. Use the Philips screwdriver to fix the hard disk screws.
9. Slide the board back into the casing.
10. Fix the screws at the back of the casing.
3.0 Connecting the EM7167 to your television
Now you have mounted a hard disk, you can connect the EM7167 to your television.
Use the following steps to connect the EM7167 to you television
