7 |
ENGLISH
4. Press ‘HDMI 2’ if you want to switch to the second HDMI device.
5. Press ‘Component’ if you are using component cables.
6. Press ‘AV’ if you are using SCART or composite to SCART cables.
5.0 Connecting a digital receiver (HDMI only)
Since the EM7100 receiver unit is equipped with a HDMI-OUT connection, it is also
possible to connect a digital receiver to the EM7100 receiver unit. This is ideal if the
digital receiver is equipped with a surround sound system.
1. Connect the HDMI cable to the ‘HDMI-OUT’ connection of the EM7100 receiver
unit.
2. Connect the other side of the HDMI cable to the HDMI input connection of your
digital receiver.
3. If correct, your digital receiver is also equipped with a HDMI output. Connect
another HDMI cable to the HDMI output connection of your digital receiver.
4. Connect the other side of this HDMI cable to the HDMI connection of your
television.
5. The television should now be able to display the main menu of your media player
or media device while your digital receiver can use the digital signals for the
(surround) sound system.
6.0 Frequently asked questions
Q: The EM7100 wireless receiver is equipped with a HDMI Out port. Which
sound formats are supported?
A: The EM7100 has HDMI 1.1 compliant HDMI ports. This means DTS 5.1 and
AC3 5.1 are supported streams. However, bear in mind that you need a
(certified) digital DTS receiver to playback DTS sound streams (if your
media player or media device cannot decode DTS to PCM sound). In some
cases you need to setup the media player or media device to use the DTS
or AC3 sound system. Refer to the manual of you media player or media
device.
Q: I do have other wireless N devices in my house. It seems the wireless signal
of the EM7100 is not sufficient enough to stream my HD content. Is it
possible to change the wireless signal of the EM7100 in order to prevent my
other wireless N devices interfering the wireless signal of the EM7100?
A: Yes. It is possible to change the wireless channel of the EM7100: Press the
‘WiFi CH 1/WiFi CH 2’ button on the remote control for approximately 5
seconds. The wireless channel will be changed and the EM7100 system
will be rebooted.
Q: How can I reset the EM7100?
