6 | ENGLISH
1. Click on ‘Alarm Settings’ in the menu.
2. Click ‘Edit’ to setup or change the settings of the absence alarm.
3. First setup the PIN settings for this alarm.
a. By default a PIN code 1234 is enabled using the alarm. In certain
situations, you do not want to use a PIN code, so you can disable this
by clicking on the checkbox. For most situations, this is not
recommended.
b. You can change the PIN code by clicking on ‘Change PIN’. A new
page will appear. First enter the ‘Old PIN’ (1234 by default), then enter
the ‘New PIN’. Confirm the new PIN code in the field ‘Repeat PIN’.
Click ‘Save’ to save the settings and automatically go back to the
previous page.
4. Select the Alarm Sensors. You can select one or more sensors to be used in for
this absence alarm.
5. Determine which sensors will be mounted in an entry and/or exit route from
outside your house to the e-Centre screen.
For example if you are going to mount the e-Centre in your living room and have
a door sensor on the front door and back door together with a motion sensor in
the living room, you should enable these sensors, because these sensors are
located in the route to the e-Centre.
a. Sensors with the option ‘Entry/Exit’ enabled will trigger the entry time
and exit time first before firing the alarm. Enable this option for sensors
used on the ground floor.
b. Sensors without the option ‘Entry/Exit’ enabled will fire the alarm
directly. Use this for sensors used on a second or third floor for
example.
6. Set one or more Alarm Events. You can let the e-Centre execute a selected
scene on one of the alarm events. Below a list of the events and a example
a. Alarm not available: If you want the e-Centre to execute a scene if the
alarm is not available, select the desired scene.
b. Alarm armed: Once the alarm is armed the e-Centre can execute the
scene ‘All off’ to switch off all lights, for example.
c. Alarm fired: Once the alarm is fired the e-Centre can execute the
scene ‘All on’, to switch on all lights to scare off the intruder.
d. Alarm disarmed: If you disarm the alarm (by entering the correct PIN
code) the e-Centre will execute this scene.
e. Entry time: During the entry time the e-Centre can execute this scene.
For example, use a scene to enable the lights in your hallway. This
allows you to find your way to the e-Centre when entering your house.
f. Exit time: During the exit time the e-Centre can execute this scene. For
example, use a scene to enable the lights in your hallway. This allows
you to find your way to the door when exiting your house.
7. Set the time settings.
a. Entry Time: This is the time in seconds you need to enter your house
from the (front) door to the e-Centre and to disable the alarm. It is
