Press “OK”.
There will appear a QR code on the screen of your Smartphone/Tablet.
Now press the “WPS” button on your Easy Pro View camera and check if the
Status LEDs are blinking.
Now lineup the QR-code displayed on the screen of your Smartphone/Tablet
facing the camera with a distance between 10~20cm.
Once the QR code is accepted the status LEDs will light up (the EM6250HD and
the EM6270 will also confirm with a beep).
The camera will now reboot and connect to your WiFi network.
If the camera ID has not yet been added to the camera list of the APP you will be
prompted to add the camera to the camera list (if preferred you can change the
camera name in the pop-up screen).
2.8.2 Connecting to Wi-Fi using the WPS button.
1. Disconnect the Ethernet cable from the camera.
2. Press the WPS button on the camera.(1 second)
3. Press the WPS button on your modem/router.(please refer to the manual of the
modem router for information about how to start WPS synchronization)
4. The blue LED will start blinking (Camera is synchronizing the wireless encryption
settings with your modem/router). The synchronization is ready when the Blue
status LED continuously lit.
2.8.3 Connecting to Wi-Fi using the App.
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Start the App “Easy Pro View”.
3. Select the “Camera settings” menu by pressing the arrow next to the camera you
would like to configure.
4. (if prompted Login with username: (default “admin”)
Password: (default “leave blank”)
5. Select “Network”
6. “Wi-Fi Network”
7. Enable Wi-Fi
8. A list of available wireless networks will be displayed.
9. Select the wireless network you want to connect to (if not displayed press
“refresh”)
10. Enter the wireless encryption key and press “ok”
11. Disconnect the Ethernet cable to connect to the wireless network.
2.8.4 Connecting to Wi-Fi using the PC (windows).
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Install the software on the CD-ROM
3. Start “Easy Pro View”
4. Right click on “camera ID” in the auto search list and click “web configure”
5. Login with username: (default “admin”)
Password: (default “leave blank”)
