13
|
ENGLISH
6. Click ‘Enable’ at the channel your PTZ camera is connected to.
7. Make sure the ‘Pelco-D’ protol is selected at the same channel the PTZ camera is
connected to.
8. Make sure the ‘Baud rate’ is set to the same baud rate as your PTZ camera is set
to. Refer to the manual of camera for more details.
9. Make sure the correct ‘Address’ is selected at ‘Address’.
10. Click ‘Apply’.
8. Click ‘OK’ at the ‘successfully saved’ screen.
11. Click ‘Exit’ until you are at the main menu.
12. Click ‘Log out’ and log out.
6.5 Checking the PTZ camera
1. Now you have connected a PTZ camera, the cameras image and function(s) of
the PTZ camera can be tested.
2. Click the ‘P.T.Z’ icon at the lower right part of the screen.
3. Fill out the password you have set during the wizard and click ‘Login’ or do not fill
out a password if you have not used the wizard or if you do not have set a
password and click ‘Login’.
4. A new screen appears with several new icons and new functions. If you have
connected the PTZ camera properly and the ‘Baud rate’ settings are correct, you
will be able to use the PTZ functions. For Example: If your camera has Pan/Tilt
options, you can use the directional buttons onscreen to move the camera’s
image. Use the ‘Zoom+’ button to zoom in. Use the ‘Zoom-’ button to zoom out
etc.
6.6 Adjusting the surveillance recorder’s resolution
It is possible to change the screen resolution. Use the following steps to change the
resolution:
1. Make sure the surveillance recorder is completely started and you see the image
of the surveillance recorder on screen.
2. Click ‘Start’.
3. You need to login using an admin account. Fill out the password you have set
during the wizard and click ‘Login’ or do not fill out a password if you have not
used the wizard or if you do not have set a password and click ‘Login’.
4. Click ‘Basic’.
5. Select ‘VGA resolution’ at the right side of the screen.
6. Select the desired resolution.
7. Click ’Apply’.
8. Click ‘OK’ at the ‘Successfully saved’ screen.
9. Click ‘Exit’ until you are at the main menu.
