4 | ENGLISH
• Mounting materials
• Ground Cable
2.0 Using the EM6015
During the following chapters we will explain how to setup the EM6015 and how to
install the cameras. It is recommended to setup the EM6015 and install the cameras
at your desk before installing and mounting the DVR kit at the desired location. This
way, you can easily setup the DVR and check whether the cameras are working
correctly.
2.1 Connect the EM6015 to your television or monitor
1. Take the EM6015 out of the packaging.
2. Connect the EM6015 to a monitor which has a VGA connection. Also, you can
connect the EM6015 to a special security monitor which has a BNC connection. If
you connect the EM6015 to a television which has a cinch connection, then you
can use an optional BNC to cinch converter. (You can also use the EM6015
without the use of a monitor, then you can view the EM6015’s images through
your network using a computer).
3. Connect a video cable to a BNC ‘VIDEO-OUT’ connection of the EM6015, or
connect a video cable to the VGA connection of the EM6015.
4. Connect the other end of the video cable to a BNC connection of your monitor, or
connect the cable to the VGA connection of your monitor.
2.2 Connecting the mouse to the EM6015
1. Take the mouse out of the packaging.
2. Connect the USB mouse to the USB port on the EM6015 with the name ‘USB
MOUSE’.
2.3 Connecting the EM6015 to your network
1. Connect a network cable to the ‘RJ45’ port of the EM6015.
2. Connect the other side of the network cable to your modem, router or switch.
2.4 Connecting the EM6015 to the power grid
1. Connect the plug of the power supply to the DVR.
2. Connect the small plug of the power cable to the power supply.
3. Connect the plug of the power cable to the wall outlet.
4. Use the on/off button to start the DVR. The on/off button needs to be set to ‘1’.
5. During the following boot of the DVR, it can take up till 90 seconds before you will
see an image.
