5.4 Configuring your wireless router (1)
When configuring the router and its security, we assume you will be using the device
as a wireless router. Make sure your wireless router is connected to your computer
using a UTP network cable.
1. Open your web browser (e.g. Internet Explorer, Opera or Firefox).
2. Type ‘http://192.168.8.1’ in the address bar.
3. Press the ‘Enter’ key or click ‘Go to’.
4. Click ‘Wireless Wizard’.
5. You will now be asked for a ‘Username’ and a ‘Password’. Fill out ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
6. The wizard appears in a pop-up screen. Click ‘Next’.
7. Choose you country/region and click ‘Next’.
8. Fill out the desired name for your wireless network in the field ‘SSID’. (Use the
‘Check SSID’ option to ensure this name is not already in use.)
9. Click ‘Next’.
10. The router will automatically scan for a suitable wireless channel.
11. As a choice, the most suitable wireless channel will appear on your screen.
12. Select the same channel you have chosen for your signal booster.
13. Click ‘Next’.
14. You will see a brief summary with the settings you have made so far. Click
‘Next’ to continue.
15. Choose ‘WPAPSK/WPA2PSK’ and click ‘Next’.
16. Choose ‘AES’ and click ‘Next’.
17. Fill out the same password in the field ‘Network Key’ you have chosen for your
signal booster.
18. Click ‘Next’.
19. Click ‘Apply and Set 5GHz Wireless Network’.
20. The wizard will now repeat above steps for the 5GHz band.
21. Click ‘Finish’ when the 5GHz settings are complete.
22. The wizard will now save the settings and will close the screen automatically.
