- 6 -
Auto functions
Below modes are controlled by ICU. Users cannot adjust power and temperature.
Water mode
Default power: 2000W
Induction cooker will be turned off automatically after water boiled, maximum working time is 30 minutes.
Users place the pot with water on the induction cooker and choose “Water”, the induction cooker will
complete the water boiling process.
Milk mode
Default power: 800W
Induction cooker will be heating with 800W, intermittent heating, when milk temperature reaches 60-70℃,
it will stop heating but still keep the milk warm. If less than 60℃, it will start to heat again. The whole
process is 20 minutes.
Soup mode
Default power: 1600W
Induction cooker will be heating with 1600W for 15 minutes, and then heating with 800W (intermittent
heating) for 105 minutes, and then turn off automatically.
Users put enough water and the soup materials into the pot and choose the soup function, the induction
cooker will complete soup cooking process.
Rice mode （A multi-layer pot should be used.）
Default power: 1000W (working around 45 minutes)
Induction cooker will be heating with 1000W for 5 minutes, and then stop heating for 3 minutes, and then
heating with 1000W for 6 minutes, and then turn to 800W intermittent heating for 31minutes.
The whole process is 45minutes.
Note: The actual cooking time and temperature will differ according to the amount of food, surroundings
and containers used.
TIMER/PRESET FUNCTION
Timer (3 hours) – only for hot pot mode and fry mode:
Press the Timer button and then the buttons “＋” & “－” to increase or reduce one minute at a time. Long
press the “＋” or “－” to adjust the time 10 minutes at a time. Press the “＋”, timer increases from 0 hour;
press the “－”, timer reduces from 3 hours. After the setting, time flashes on the display screen for several
seconds, the appliance will confirm your time setting and the digital display switches between the
power/temperature and count-down time. To cancel the timer, press the Timer button again. The indicator
on the Timer button will go out.
Preset (24 hours) – only for water mode, milk mode, soup mode and rice mode:
Press the Timer button to set the start time. Press “＋”, time increases by one minute; press “－”, time
increases by one hour. You can set the appliance to start working in your set time (from 0:01 to 23:59). After
the setting, time flashes on the display screen for several seconds, the appliance will confirm your time
setting and the digital display switches between the power and count-down time. To cancel the preset,
press the “Timer” button and its indicator goes out, then the appliance starts to work immediately.
Note: Only when the “Timer” indicator illuminates, the timer or preset function can be set. Only when the
time flashes on the screen, you can adjust the time. If the appliance confirmed the set time or you changed
the operation mode, you need to reset the timer or preset.
Overheat Protection:
The appliance is equipped with overheat protection. If the pot or pan gets too hot, the appliance will switch
