DIAGRAM 4
To activate the sleep function
When radio on press snooze/sleep button (16), sleep “90” show on display with 2 second decrease sleep
timer 90 minute-off by press snooze/sleep button (16) each. (Diagram 4)
NOTE: Press power on/off button (14) to off sleep function.
Snooze function:
1. Press snooze / sleep button (16) to activate snooze function (bell alarm or radio alarm will stop) when
alarming.
2. Snooze interval is 9 minutes.
WORKING WITH AUDIO SOURCE
1. Use connective wire to join the audio source and the main unit together.
2. Adjust volume of the audio source in order to get a better amplifying effect.
REMARK: DO NOT set the audio source to too high volume to avoid overloading.
The output sound of the main unit will be eliminated and replaced once the “AUDIO IN” JACK (15) has
connected to other audio source.
The sound will resume once the connective wire is removed from jack.
If “audio in“ function is in use and broadcasting music, the alarm sound will insert into the music at the pre-set
wake up time.
To stop the sound, simply press the power on/off alarm off button (14).
RADIO OPERATION
- Press the power on/off button (14) to turn radio on.
- Select AM or FM band using the wave band switch (2).
- Select the station using the tuning control (8).
- Press the volume control button (3)/(4) to adjust volume as required.
- Press the power on/off button (14) to turn radio off.
Note:
- The AM band use an internal directional aerial. Rotate the radio for best reception.
- Ensure that FM cord antenna (7) is completely unrolled and extended for FM reception.
018.
SLEEP SET MODE
02-4556_EN 6/1/06 10:20 AM Page 08
