- 13 -
• Press the added device (3),
you will now be asked for
the password (4) of the
main user.
Note
With limited rights there is
no access via configuration
to advanced settings.
10. Removing device
• Removing a device from the
app is very easy. Open the
app and slide to the left,
press delete and the device
will be removed from the
app.
11. Reset
If the pairing of the ELRO Intercom app fails and you are convinced that you are using the
correct WiFi signal (2.4Ghz) with associated password, it is recommended to reset the
monitor. Proceed as follows:
- Press the key with the key for at least 5 seconds, the monitor will start the reset procedure.
- When the reset procedure is in operation you will hear: "Reset parameter is succesfull, the
system is about to restart". This means: "Reset parameter is successful, the system is about
to restart".
- Then wait until the monitor reports with the text: "Please setup network by your mobile
application". This means: "Please setup network by your mobile application". Mobile
application refers to your Android or iOS smartphone/tablet.
- You can now try again to connect the app to the WiFi monitor.
