612699
12
Verklein
Vergroot
Pagina terug
1/94
Pagina verder
<CR> [ repeat the last command ]
Sending a single carriage return character causes
the ELM327 to repeat the last command that it
performed. This is typically used when you wish to
obtain updates to a value at the fastest possible rate -
for example, you may send 01 0C to obtain the engine
rpm, then send only a carriage return character each
time you wish to receive an update.
AL [ Allow Long messages ]
The standard OBDII protocols restrict the number
of data bytes in a message to seven, which the
ELM327 normally does as well (for both send and
receive). If AL is selected, the ELM327 will allow long
sends (eight data bytes) and long receives (unlimited
in number). The default is AL off (and NL selected).
AMC [ display Activity Monitor Count ]
The Activity Monitor uses a counter to determine
just how active the ELM327's OBD inputs are. Every
time that activity is detected, this counter is reset,
while if there is no activity, the count goes up (every
0.655 seconds). This count then represents the time
since activity was last detected, and may be useful
when writing your own logic based on OBD activity.
The counter will not increment past FF (internal logic
stops it there), and stays at 00 while monitoring.
12 of 94
ELM327
ELM327DSJ Elm Electronics – Circuits for the Hobbyist
www.elmelectronics.com
AT Command Summary (continued)
CAN Specific Commands (continued)
D0, D1 display of the DLC off*, or on
FC SM h Flow Control, Set the Mode to h
FC SH hhh FC, Set the Header to hhh
FC SH hhhhhhhh Set the Header to hhhhhhhh
FC SD [1 - 5 bytes] FC, Set Data to [...]
PB xx yy Protocol B options and baud rate
RTR send an RTR message
V0, V1 use of Variable DLC off*, or on
J1939 CAN Specific Commands (protocols A to C)
DM1 monitor for DM1 messages
JE use J1939 Elm data format*
JHF0, JHF1 Header Formatting off, or on*
JS use J1939 SAE data format
JTM1 set Timer Multiplier to 1*
JTM5 set Timer Multiplier to 5
MP hhhh Monitor for PGN 0hhhh
MP hhhh n “ “ and get n messages
MP hhhhhh Monitor for PGN hhhhhh
MP hhhhhh n “ “ and get n messages
AT Command Descriptions
The following describes each AT Command that the
current version of the ELM327 supports:
AMT hh [ set the Act Mon Timeout to hh ]
When the Activity Monitor Count (ie time) exceeds
a certain threshold, the ELM327 decides that there is
no OBD activity. It might then give an ACT ALERT
message or switch to Low Power operation, depending
on how the bits of PP 0F are set. The threshold setting
is determined by either PP 0F bit 4, or by the AT AMT
value, should you provide it. The actual time to alarm
will be (hh+1) x 0.65536 seconds. Note that a value of
00 is accepted for AMT, but is used to block all Activity
Monitor outputs.
AR [ Automatically set the Receive address ]
Responses from the vehicle will be acknowledged
and displayed by the ELM327, if the internally stored
receive address matches the address that the
message is being sent to. With the auto receive mode
in effect, the value used for the receive address will be
chosen based on the current header bytes, and will
automatically be updated whenever the header bytes
are changed.
The value that is used for the receive address is
determined based on such things as the contents of
the first header byte, and whether the message uses
physical addressing, functional addressing, or if the
user has set a value with the SR or RA commands.
Auto Receive is turned on by default, and is not
used by the J1939 protocol.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elm-327

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elm 327 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elm 327 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info