741416
10
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
10 DS80HP8A-001F
<
<
N
N
O
O
T
T
E
E
>
>
If 5 short beeps are heard when arming/disarming, it means that the Tamper switch was not completely pressed. Make
sure that the Tamper switch is set correctly and then repeat the control unit check.
Replacing the batteries
Step 1: Deactivate the tamper function on the control unit. If the siren is installed on MP500/xx, access “Maintenance
mode (see the instruction manual of the control unit for details). The siren will generate an acoustic signal to
indicate that the Tamper switch is off.
Step 2: Remove the cover fixing screw on the bottom and carefully extract the external container.
Step 3: Remove the LED cover by loosening the two screws which fix it.
Step 4: Move the power switch to the OFF position.
Step 5: The battery housing is a large size compartment with a cover fixed by means of four screws. Remove the four
screws and remove the cover from the housing.
Step 6: Remove the flat batteries and press the Tamper switch twice to discharge the device.
Step 7: Insert new batteries in the battery housing.
Step 8: After having inserted all the batteries, move the power switch to terminal BT4. All the LEDs will blink once and the
buzzer will beep once.
Step 9: Reposition the LED cover and fix it with two screws.
Step 10: Reposition the battery housing cover and fix it with four screws. Be careful not to tighten the screws excessively.
Step 11: Reposition the upper cover by coupling it to the top of the base. Press the bottom of the upper cover onto the base
and tighten the screw of the bottom.
Step 12: Reactivate the tamper function on the control unit. If the siren is installed on MP500/xx, exit “Maintenance” mode
(see the instruction manual of the control unit for details).
Step 13: After replacing the batteries, the low battery indication disappears from the portal and app after the first Supervision
or in case of opening of the tamper switch after reactivating it. If Supervision is disabled or the tamper switch is not
opened after the expected time of one hour, the low battery indication will not disappear from the portal and app.
For this reason, Supervision must be enabled on the control unit.
Tamper switch
pin to be pressed
completely
against the wall
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron HP600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron HP600 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Elkron HP600

Elkron HP600 Snelstart handleiding - Deutsch, English, Français, Italiano - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info