741463
19
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
DS80KP92-001 19
4.1 PROTOCOL AND BAUD RATE CONFIGURATION ON KEYBOARD
Entering the password, on the keyboard, press the button ENTER: the keypad display will show PTZ Setup
On the keyboard, press the button ENTER; the keypad display will show ADDRESS: 001
With the numeric keyboard (1÷9) , enter the three digits of the PTZ address of the dome connected, to change
protocol type and baud rate default configuration of this dome. After selecting the address, press the button
ENTER to confirm; the keyboard display will show PROTOCOL: PELCO D
Move the joystick to the right to change the protocol type and the keyboard will be displayed PROTOCOL:
PELCO D (protocol used in Elkron products
)
Press ENTER to confirm; the keyboard buzzer will confirm that the change has been successfully executed and
the keyboard display will show SETUP SUCCESS
Move the joystick down or up to select the baud rate and on the keypad will display the value BAUD
RATE:9600
To change the baud rate value move the joystick left or right
Press ENTER to confirm; the keyboard buzzer will confirm that the change has been successfully executed and
the keyboard display will show SETUP SUCCESS
After all the configurations have been completed, press the button Esc for 3 times to go back to Dome
management mode.
NOTE:
If the same protocol type or the same baud rate value must be configured for all the addresses, when the keyboard
display shows ADDRESS: 001 move the joystick up or down until the display shows ADDRESS: 0-255, then select the
desired protocol type and the baud rate value.
4.2 SYSTEM PARAMETERS CONFIGURATION
On the keyboard, press the button ENTER: the keypad display will show PTZ Setup
Move the joystick down; the keyboard display will show SYSTEM SETUP
Move the joystick down; the keyboard display will show:
o PW SETUP: the setup password can be changed (that is, it is possible to configure the new password
replacing the default password “8888” to change keyboard parameters).
o DEFAULT SETUP: restore factory settings.
o SOUND SET: enable/disable buttons sound.
o KEYBOARD ID SET: set of keypad ID, reserved for future uses.
o LOCK SET: enable/disable keypad lock.
NOTE:
When LOCK is enabled and a password is used, this will be asked at every Power On to manage the Dome.
4.3 LEARN SETUP
Reserved for future uses.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron 80KP9200133 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron 80KP9200133 in de taal/talen: Duits, Engels, Italiaans als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info