471126
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
INSTRUCTION ON MOUNTING AND USEGB
123 4 5 6 7
21.Slide the bottom section of the chimney down until it
completely covers the suction unit and slots into the
housing provided on top of the hood.
22.Turn the mains power on again at the central electrical
panel and check for correct hood operation.
Carry out the SET-UP of the control panel, if necessary.
To do this consult the Functioning  SET UP paragraph
in the following pages.
Electrical connection
The electrical tension must correspond to the tension noted
on the label placed inside the cooker hood. Connect the
electrical plug, where provided, to the an easily accessible
outlet in conformity with local standards in force.
Where an electrical plug is not provided (for direct connection
to electrical network) place a standards approved bipolar
switch with an aperture distance of not less than 3mm
(accessible) from the contacts.
Description of the hood - Fig. 1
1. Control panel
2.Grease filter
3. Grease filter release handle
4. Halogen lamp
5. Vapour screen
6. Telescopic chimney
7. Air outlet (used for filter version only)
8. Sensor
Operation
Model with electronic controls
Main Functions
1 - ON-OFF lamp button
2 - Led signal for anti-grease filter saturation (See the relative
cleaning instructions for anti-grease filters).
3 - Led signal for active carbon filter saturation (See the
relative cleaning instructions for active carbon filters).
4 - Led signal for automaticoperation
5 - ON-OFF button for automaticoperation
6 Functions signal (Led Display).
7 - ON/OFF Knob and suction power selection.
List of Functions
To switch the cooker hood to (ON) depress knob 7
The operation of button 5 is enabled and the wording
Sensor will appear, the cooker hood will set at
Manual Stand-By.
To switch the cooker hood to (OFF) depress knob 7
again; if the cooker hood is set in the automatic
operation mode then depressing knob 7 once will launch
the cooker hood to manual Stand-By depressing the
knob again will switch the cooker hood to (OFF).
Attention! When the cooker hood is switched (OFF) all the
functions are disabled.
To switch on the lamps depress button 1.
To switch off the lamps depress button 1 again.
To increase the suction speed rotate knob 7 clockwise
and set the desired speed (1, 2, 3 or intensive).
Attention
The intensive suction speed is timed for 5 minutes after
which the cooker hood returns to the 2
nd
speed.
The led number (1, 2 or 3) will appear on the Display,
which is equivalent to the suction speed set plus a red
led will also appear when the suction speed is set at
intensive.
The other display leds will turn on alternatively in
proportion to the suction power setting.
To decrease the suction speed rotate the knob
anticlockwise (Intensive, 3, 2, 1, Stand-by)
Filter Saturation Signal
The cooker hood is provided with an electronic device
which signals the necessity to clean and/or replace the
filters (Grease or Active Carbon).
Attention!
The saturation signal device for the active carbon
filter is disabled, the enabling (or disabling) function is
performed in the SET-UP operation (see instructions at
the bottom of the page).
Grease filter saturation signal
The LED signal 2 will turn on.
Active Carbon filter saturation signal
The LED signal 3 will turn on.
Attention! The signal will not appear when the cooker hood
is switched (OFF) or in stand-by mode.
Reset the Filter saturation signal (to be carried out ONLY
after having cleaned and/or replaced the filters):
Set the cooker hood to stand-by depress button 7 until
the sound of the beep and upon the turning off of the
wording sensor.
Automatic Operation
The cooker hood always sets at manual operation,
depressing button 5 the cooker hood sets to automatic
operation: the wording Sensor turns on (from white
to orange); the cooker hood starts up and regulates the
speed only if the sensors, of which the cooker hood is
equipped, detect any variations in the environment
conditions. The led signals for function 6 will turn on in
sequence at a speed that varies the suction speed that
it sets automatically on the basis of the sensors readings.
Depressing button 5 again and rotating knob 7 the cooker
hood returns to manual operation.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elica Artica AST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elica Artica AST in de taal/talen: Engels als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info