600925
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
HYSTERESIS
MIN TIME ON
MIN TIME ON
PI ZONE
PRE SWITCH MOdE
SUMMER MOdE
Odd-EVEN MOdE
HEATING
TEMP CORRECT
6
(factory setting of 2 min.)
MINIMUM SWITCH-ON TIME
(factory setting of 2 °C)
PI-CONTROL BAND
Set the interval by turning the “ “ button, and confi rm with the “ “ button.
Select within the range of 1 to 5 minutes. The setting is given by the
heating system type, and depends on the PI-control time period selection.
Setting according to the table is recommended.
Set the value by turning the “ “ button, and confi rm with the “ “ button.
TThis value determines the temperature at which the PI-control starts functioning. For example, the
desired temperature is 22 °C, the proportional band is 1.5 °C. Up to 20.5 °C, the source heats fully.
When this value is reached, the PI-control starts. The PROPORTIONAL band can be set within the
range of 0.5 to 3.0 °C (by 0.1 °C).
Set the PI band by turning the “ “ button, and confi rm with the “ “ button.
5
SETTING HYSTERESIS PARAMETERS
(factory setting of 0.5 °C)
(factory setting of 2 min)
HYSTERESIS
MINIMUM SWITCH-ON TIME
6
SETTING PI-CONTROL PARAMETERS
(factory setting of 10 min.)
PI-CONTROL INTERVAL
Select according to the object’s thermal inertia. The optimum setting usually falls within the range of
10 to 15 min. The adjustable range is 5 min to 20 min (by 1 min).
Here you can set the minimum switch-on time of the boiler in minutes at hysteresis. Select within the
range from 1 to 5 minutes according to the type of the heating system used (see the table).
Set from 0.1 to 6 °C. According to the value preset, the thermostat switches on at the temperature:
T switching = T required - HYSTERESIS
Set the hysteresis by turning the “
“ button, and confi rm with the “ “ button.
Set the value by turning the “
“ button, and confi rm with the “ “ button.
Heating type
Minimum source
switch-on time
Electric heating
1
Plate radiators
2 (3)
Cast iron radiators
4
Floor heating
5
7
This function guarantees you the required temperature at the required time. You need not consider when
to switch the heating on in order to be warm when getting up in the morning without heating unnecessarily
long in advance. You just program the time at which you want the desired temperature. Within two opera-
ting days, the program ascertains the thermal constants of the room and then it switches the heating on
in advance suffi ciently. The preliminary switch-on time is limited to 2 hours.
PRELIMINARY SWITCH-ON OF HEATING
Set YES/NO by turning the “ “ button and press the “ “ button to confi rm.
(NO set by default)
8
In this mode, you are not allowed to switch the heating on. It can particularly be used in the summer
period, when you need not heat. After you enable this mode, the “ “ symbol appears on the display.
Note: The anti-freeze protection (3 °C) is still enabled. In this mode, you cannot change the temperature
or set the holiday mode!
SUMMER MODE
Set YES/NO by turning the “ “ button and press the “ “ button to confi rm.
(NO set by default)
9
If you choose “YES”, the PrU and PrL programs will alternate automatically according to the current week
(even/odd). This setting is suitable, for example, for shift operation (the requirements on thermal comfort
in the object change every week).
EVEN-ODD WEEK SELECTION
(NO set by default)
Set YES/NO by turning the “ “ button and press the “ “ button to confi rm.
10
Setting the thermostat function.
HEATING = the output relay (for heating systems) switches if the current temperature drops below the desired value
COOLING = the output relay (for cooling systems) switches if the current temperature rises above the desired value
HEATING / COOLING SELECTION
(HEAT set by default)
Set HEAT/COOL by turning the “ “ button and press the “ “ button to confi rm.
11
This is used for correcting the temperature measured by the thermostat. The setting can only be done
after 12 hours of operation, when the internal sensor temperature has settled. Measure the room
temperature with a thermometer; if it is different from the temperature on the thermostat,
set the correction within the range of -5 °C do +5 °C.
TEMPERATURE CORRECTION
Set the correction by turning the “ “ button and press the “ “ button to confi rm.
(0 °C set by default)
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elektrobock PT 32 GST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elektrobock PT 32 GST in de taal/talen: Engels als bijlage per email.

De handleiding is 3,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elektrobock PT 32 GST

Elektrobock PT 32 GST Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info