753497
12
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
12
ENGLISH
1. Please Read First!.....................12
2. Safety .........................................12
2.1 Specified conditions of use .........12
3. Operating Elements ..................13
3.1 Powerbox
(welding power source)...............13
3.2 SDV (separate wire feed unit).....13
3.3 SWK
(separate watercooling unit)........13
3.4 Control unit..................................13
3.5 Control unit for default
machine settings .........................14
4. Installation .................................14
5. Transport ...................................14
5.1 Crane hoisting.............................14
6. Preparing for Operation............14
6.1 Manual arc welding .....................14
6.2 Gas-shielded arc welding............14
6.3 Threading the electrode
wire in..........................................15
6.4 Connect the gas cylinder.............16
7. Default Machine Settings .........16
7.1 Control unit for default
machine settings .........................16
7.2 Charateristics curves...................16
7.3 Gas type......................................16
7.4 Pulsed MIG/MAG ........................16
7.5 MIG/MAG ....................................16
7.6 Manual arc welding .....................16
7.7 FBZ Burnback time .....................16
8. Operation ...................................17
8.1 Control unit..................................17
8.2 Gas-shielded arc welding............17
8.3 Manual arc welding .....................17
8.4 Shutting down .............................17
9. Maintenance ..............................17
10. Available Accessories..............17
11. Repairs.......................................18
12. Environmental Protection ........18
13. Troubles.....................................18
13.1 Error messages...........................18
13.2 General faults..............................18
14. Technical Specifications ..........19
15. Available Accessories..............59
Read these instructions before use.
Pay special attention to the safety
information.
If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
machine!
Dispose of the packing in an envi-
ronmentally friendly manner. Take
to a proper collecting point.
Keep these instructions for refer-
ence on any issues you may be
uncertain about.
If you lend or sell this machine be
sure to have the instructions go with
it.
All legal regulations pertaining to the
operation of electric arc welding
machines must be observed.
The following information should be
observed as well for a safe and risk-free
handling of the welding machine!
Danger! Electric potential!
Use the machine indoors and in dry
environment only.
Connect the machine only to an
properly earthed out.
If in doubt check with a qualified
electrician!
Danger! Electric potential!
Service and repairs to the machines
must only be made by qualified electri-
cians.
Unplug before removing the machine’s
cover.
Danger!
Wear sufficient protective clothing when
welding.
Always use a welding visor and welder’s
gloves to protect against flying sparks
and arc radiation.
Danger!
All metal fumes are detrimental to
health!
When working indoors ensure sufficient
ventilation and extraction in order to not
exceed the max. permissible workplace
pollutant concentration.
Fumes of lead, cadmium, copper, zinc
and beryllium are especially harmful!
Caution!
Never weld earthed metal.
Welding earthed metal may cause possi-
ble damage to the protective earth con-
ductors by stray currents.
Caution!
Always attach the earth cable directly to
the weld metal and as close as possible
to the welding spot.
Caution!
Special care is required when working
near computers, electronically controlled
equipment or in the proximity of mag-
netic data media (sound recording
tapes, floppy disks, data recording
tapes, credit cards, etc.).
The arc start can cause misfunction of
this type of equipment or data loss.
2.1 Specified conditions of
use
The following components
Powerbox (welding power source)
SDV (separate wire feed unit)
SWK (separate watercooling unit,
optional available for models 232/
302 EP at extra cost)
together constitute are complete welding
machine for professional and industrial
use.
Note:
The componenents, connected to
each other and ready to run are referred
to as "welding machine" in these instruc-
tions.
Their most important features:
Secondary-switched inverter for
gas-shielded arc welding
Integrated manual arc welding mode
Gas-shielded arc welding with pre-
programmed charateristics curves
Integrated charateristics curve for
MIG brazing
4-roller drive with tachometer-con-
trolled motor for precise and reliable
wire feed
Integrated softstart for operating
modes MIG/MAG and pulsed MIG/
MAG
Water cooling for high shielding gas
welding power.
This welding machine is intended for
welding FE-metals, alloyed steels, non-
ferrous heavy metals and aluminium.
It conforms to all relevant regulations at
the time of delivery.
This welding machine is intended for
operation by professional arc weldors or
specialists with similar qualification.
Permissible welding processes:
MIG and pulsed MIG (Metal-Inert-
Gas),
for aluminium and aluminium alloys
MAG and pulsed MAG (Metal-
Active-Gas)
for steel or stainless steel
Manual arc welding
for steel
MIG brazing
for electro-galvanized steel plates.
For TIG welding it must be ensured that
the shielding gas cover is not blown
away by air draft.
Table of Contents
1. Please Read First!
2. Safety
Xs0014e.fm Operating Instruction ENGLISH
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elektra Beckum Mig Mag 232EP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elektra Beckum Mig Mag 232EP in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info