If you have chosen a delayed start, the washing
machine will begin the countdown.
The display will show the duration of the programme
or the selected delay.
10. How to change an option or a
programme during its cycle
Before you make any change, you must pause the
machine by pressing the START/PAUSE button .
It is possible to change any phase before the
programme carries it out.
Changing a running programme is possible only by
cancelling it and selecting a new programme.
The machine will resume the cycle from the
beginning and the washing water in the tub will not
emptied out.
If it is necessary to drain the water in order to change
the programme in progress, proceed as follows:
• turn the programme selector dial to «O»;
• select programme ;
• press the START/PAUSE button again.
When the water has been drained, the display shows
a blinking zero and the light light on.
You may now select a new programme and press
the START/PAUSE button to start it.
11. Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running: the corresponding light
starts to flash.
Depress the same button to restart the programme.
12. Cancelling a programme
Turn the selector dial to O to cancel a programme
which is running. Now you can select a new
programme.
18
7. Select the required options
The light corresponding to the depressed button
illuminates.
8. Select the Delay Start
To delay starting of the programme, press the
DELAY start button. The figures corresponding to the
selected delay will be displayed for about 3 seconds,
after which the duration of the selected programme
will appear on the display.
During this period it is possible to load other laundry:
• depress START/PAUSE button;
• open the door;
• load the laundry;
• close the door and depress START/PAUSE button
again.
9. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing and the door pilot light illuminates.
The pilot light corresponding to the wash phase
which is running is on. The machine starts operating.
