16
electrolux
Ice-cube production
This appliance is equipped with one or
more trays for the production of ice-
cubes.
These are insert on the sides of the
upper freezer drawer.
Pull out the upper freezer drawer.
Extract the ice-tray.
Pull out the tap.
Fill with water to the limit indicated.
“MAX”.
Refit the tap and insert the tray in the
appropriate place.
To remove the ice cubes rotate the tray
with the ice needles towards the top and
hit on a rigid surface.
To semplify the release of the ice needles
it is recommended to keep the closed
tray under if possible luke warm water for
a few seconds.
Do not use metallic instruments to
remove the trays from the freezer.
Excessive temperature
alarm
An increase in the temperature in a
compartment (for example due to an
power failure)
is indicated by:
• flashing temperature;
• flashing of the symbol ;
• sounding of buzzer.
When normal conditions are restored:
• the acoustic signal shuts off;
• flashing of the symbol ;
• the temperature value continues to
flash;
When you press key "E" to de-activate
the alarm, the highest temperature
reached in the compartment appears
on indicator for some seconds. Then it
returns on the normal operation
showing the temperature of the
selected compartment.
During the alarm phase, the buzzer
can be switched off by pressing key E.
