646322
13
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
3156 24
8
7
9
Installa on
GB
15
Connec ng the boiler
Connec ng the boiler
This chapter will explain how to
make all connec ons to the boiler
with regard to:
• Hydraulic connec ons
Condensate drain connec on
• Gas connec on
Flue gas connec on
Air intake connec on
• Electrical connec on
The boiler should always be con-
nected in such a way, that the system
applies to all relevant standards and
regula ons (European, na onal and
local).
Its the responsibility of the installer
to ensure that all standards and reg-
ula ons are respected.
Hydraulic connec ons (1,2,3,4)
The boiler should always be con-
nected in such a way, that water ow
through the boiler can be ensured at
all mes.
Connect the ow (1) and return (2)
connec on of the system without
applying undue strain to the boiler
connec ons.
The boiler contains a connec on
possibility for an (op onal) kit with
safety valve, ll/drain valve and an
expansion vessel connec on. The
safety valve must be connected to
the ow connec on (3) of the boiler,
the ll/drain valve and expansion
vessel connec on must be connect-
ed to the return connec on (4).
The (op onal) pump kit should be
mounted directly to the return con-
nec on (2) of the boiler, before con-
nec ng to the system.
Condensate connec on (5)
A er lling with water, the syphon
(included in delivery) should be in-
stalled to the connec on (5) at the
bo om of the boiler.
Connect the hose to the draining sys-
tem in the boiler room.
The connec on to the draining sys-
tem should always be done with an
open connec on, in order to avoid
a ooding of the boiler in case of a
blocked drain.
Gas connec on (6)
The gas connec on must be made by
an authorized installer in accordance
with the applicable na onal and local
standards and regula ons.
Connect the gas line from the system
without applying undue strain to the
gas connec on (6) of the boiler. A gas
cock should be mounted directly be-
hind the boiler.
ATTENTION: The Boiler is set for
G20-G25 gas type. To operate with
G31 gas type follow the procedures
described on page 30.
Electrical connec on
The electrical connec on must be
made by an authorized installer in
accordance with the applicable na-
onal and local standards and regu-
la ons.
For the power supply it’s necessary
to use a mains isolator switch with
a contact opening of at least 3 mm
within the boiler room (according to
clause 22.3 of the EN-IEC-60335-1).
This switch can be used to switch o
the power supply for maintenance
purposes.
The boiler must be connected with a
power cord type H05V2V2-F.
All cables should be lead through the
cable glands (7 - 9) at the bo om of
the boiler into the electro panel (8).
Connect all wires to the terminals ac-
cording to the wiring diagram of the
boiler, see pages 25-26
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elco THISION L EVO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elco THISION L EVO in de taal/talen: Engels als bijlage per email.

De handleiding is 8,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info