561011
14
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
Connection and starting
1
2
1.
Analogue RCA stereo input: This is the standard input for all common analogue sources in the consumer
electronics field. Here you can connect the source by means of the RCA cable (“D”, see p.1) which is part of
the accessory kit.
Sources which are connected to this input are mixed together with the signals coming from the inputs 4.)
and 5.).
2.
Analogue 3.5 mm TRS jack stereo input: This is the so called AUX input, which is especially suitable for
sources with a low output level such as headphone outputs from mp3-players, notebook PCs, small radios
etc.
Note: If you plug-in a TRS plug in this input, all other inputs will be muted (turned off).
3.
Binding posts for connecting the slave speaker: Connect the speaker cable which is part
of the scope of delivery to these 2 binding posts and connect it to the slave speaker. Take
care of connecting the “+” of the master speaker with the +” of the slave speaker. For a
better orientation, the 2 poles of the speaker cable are made of different materials. In
case you need a different length of the cable, you can use any commercially available
speaker cable.
4.
USB jack for direct connection of the AM 50 to a PC. Because of the USB interface which is implemented in
the AM 50, you can directly connect the master speaker to a PC. The AM 50 will log-in to the system as
standard stereo soundcard.
Note: If you would like to use this kind of connection, please make sure to choose an adequately loud
volume in the PCs system control and the correct audio output device.
5.
USB jack for connecting the ELAC wireless receiver, which is optionally available. If you own the ELAC
wireless set, you have the possibility to feed your AM 50 with audio signals wirelessly. Use one of the short
USB cables (within scope of delivery of the wireless set) to connect the wireless receiver to the AM 50
MASTER.
6.
Mains inlet. Connect the female plug of the power cord to this jack.
7.
Mains switch. To switch off the AM 50, please use this switch. No stand by current is
drawn out of the mains if the AM 50 is switched off.
Note: If you want to disconnect the AM 50 MASTER all-phase from the mains, you have
to pull out the mains plug.
8.
Mains fuse: In case this fuse is blown, please check first what the reason for blowing the
fuse was. You may contact a technician to assist. Only fuses of same type and value have
to be used.
9.
Voltage selector switch: You can adapt the operating voltage of the AM 50 to your local
energy supplier by means of the voltage selector switch. Only use this switch if the
selected mains voltage is not correct for your country.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elac AM 50 STEREO SET bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elac AM 50 STEREO SET in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info