5. Reference
27
5. Reference
5-1. Attaching an arm
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the
LCD monitor.
Note
•
If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers
before selecting.
-
Hole spacing on the arm mounting
100 mm x 100 mm (VESA compliant)
-
Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such
as a cable
-
TÜV/GS approved arm or stand
•
Please connect cables after attaching an arm stand.
Setup Procedure
1
Lay the LCD monitor down. Do not scratch the panel.
2
Remove the tilt stand by loosening the screws.
Unscrew the four screws securing the unit and the satand with the screwdriver.
3
Attach an arm stand to the LCD monitor securely.
Secure the monitor to the arm or stand using the screws specified in the user's manual of the arm
or stand.