694713
2
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
Cover
Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
•
Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC or external device to using the
monitor.
•
The latest User’s Manual is available for download from our web site:
http://www.eizo.com
2
Location of Caution Statement
<For USA-California Only>
CR Coin Lithium Battery contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
This product has been adjusted specically for use in the region to which it was originally shipped. If operated
outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that
EIZO monitor specications are subject to change without notice.
3
Notice for this monitor
This product is suited to general purposes like creating documents, viewing multimedia content.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until
the dew condensation disappears, otherwise it may cause some damage to the monitor.
4
Cleaning
Attention
Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or
panel, and also quality deterioration of the image.
Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
Note
The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with
water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according
to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
5
CONTENTS
CONTENTS
Cover ...................................................................... 1
Notice for this monitor ............................................ 3
CONTENTS ............................................................. 5
Chapter 1 Introduction ....................................... 7
1-1. Features ......................................................... 7
1-2. Controls and Functions ............................... 8
BeforeUsingRemoteControl......................... 9
Howtoinstallbattery................................... 9
ReceivableRangeofRemoteControl......... 9
1-3. EIZO LCD Utility Disk...................................10
Diskcontentsandsoftwareoverview............10
Touse“ScreenManagerProfor
LCD(DDC/CI)/EIZOScreenSlicer”.................10
1-4. Basic Operations and Functions ...............11
BasicoperationoftheSettingmenu..............11
Functions........................................................12
Chapter 2 Adjusting Screens .......................... 13
2-1. Compatible Resolutions/Formats ..............13
AnalogInput(D-Sub)..................................13
DigitalInput(DVI-D,HDMI:PCsignal).......13
DigitalInput(HDMI:videosignal)...............13
2-2. Setting the Resolution ................................14
Windows7..................................................14
WindowsVista............................................14
WindowsXP................................................14
MacOSX....................................................14
2-3. Adjusting Color ............................................15
Toselectthedisplaymode(ColorMode).......15
Toperformadvancedadjustments................16
Adjustablesettingsineachmode..................16
Toadjustbrightness“Brightness”..................17
Toadjustblacklevel“BlackLevel”.................17
Toadjustcontrast“Contrast”..........................18
Toadjustthecolorsaturation“Saturation”.....18
Toadjusthue“Hue”........................................19
Toadjustcolortemperature“Temperature”...19
TosetContrastEnhancer
“ContrastEnhancer”....................................... 20
Toreduceimageblur“PowerResolution”..... 20
Toadjustgamma“Gamma”...........................21
Toadjustgain“Gain”......................................21
Tosetoverdriveintensity“Overdrive”........... 22
2-4. Screen Adjustment ..................................... 22
DigitalSignalInput........................................ 22
AnalogSignalInput....................................... 22
2-5. Screen Size Changing ................................ 26
AnalogInput(D-Sub)/DigitalInput
(DVI-D,HDMI:PCsignal)............................. 26
DigitalInput(HDMI:videosignal)................. 27
Tosetthescreenratio“Overscan”............ 27
Chapter 3 Setting Monitor ............................... 28
3-1. Adjusting Volume........................................ 28
Toturnthevolumeup/down.......................... 28
Tomutethesoundtemporarily...................... 28
3-2. Switching sound source for HDMI signal
input “Source” ............................................. 28
3-3. To adjust the sound level “Sound Level” .. 29
3-4. Enabling/Disabling DDC/CI
communication “DDC/CI.......................... 29
3-5. Locking Buttons “Key Lock” ..................... 29
3-6. Setting the EIZO Logo Display “Logo” .... 30
3-7. Setting Language “Language” .................. 30
3-8. Changing the HDCP authentication
setting for HDMI signal input ..................... 30
3-9. Resetting the Monitor to the Default
Settings .........................................................31
Toresetthecoloradjustments“ColorReset”31
Toresetalladjustmentstothedefault
settings“Reset”..............................................31
Chapter 4 Power Saving Functions ................ 32
4-1. Setting Power Saving “Power Save” ........ 32
Monitor.......................................................... 32
AudioOutput................................................. 33
4-2. Setting Power Indicator “Power
Indicator..................................................... 33
4-3. Enabling/Disabling Automatic
Brightness Adjustment “Auto EcoView. 34
4-4. Checking the power saving level .............. 34
4-5. Enabling/Disabling Auto Power-OFF
“Off Timer (min)......................................... 34
Chapter 5 Connecting Cables ......................... 36
5-1. Connecting Multiple External Devices ..... 36
Toswitchamonginputsignals...................... 36
Chapter 6 Troubleshooting .............................. 37
Chapter 7 Reference ........................................ 41
7-1. How to Attach the Optional Arm ................41
7-2. Attaching the Stand base .......................... 42
7-3. Displaying Monitor Information
“Information” ............................................... 42
7-4. Specications ............................................. 43
7-5. Glossary ....................................................... 46
7-6. Preset Timing .............................................. 48
6
CONTENTS
Appendix .............................................................. 49
Trademark ............................................................... 49
License .................................................................... 49
ENERGY STAR ........................................................ 49
TCO .......................................................................... 50
FCC Declaration of Conformity ............................ 50
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monitor ......................51
Hinweis zur Ergonomie : ........................................51
LIMITED WARRANTY ............................................. 52
China Measures for RoHS Compliance in
ChinaRoHS .........................................................61
7
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 23″ wide format LCD
• Applicable to the resolution of 1920 × 1080.
• Panel with a wide eld of view adopted
VA panel with 178º horizontal and vertical viewing angles.
• HDMI connector × 2
-
Applicable to the PC input signal using HDMI input, allowing three different digital signal inputs from a PC.
• The Color Mode function allows the user to select the display mode optimum to the displayed image.
-
The Paper mode reproduces an easy-on-the-eyes display that looks just like printed paper.
See To select the display mode (Color Mode)” (page 15).
• ContrastEnhancer function
Automatically adjusts the contrast according to the image, enabling the display of high contrast and sharp animated
images.
See To set ContrastEnhancer “ContrastEnhancer” (page 20).
• Power Resolution function
You can reduce image blur by enhancing its outline.
See To reduce image blur “Power Resolution”” (page 20).
• Two dedicated gamma modes (“Power1/“Power2”) suitable for game images implemented
The images will be sharpened by increasing the halftone (Power1) and low-tone (Power2) contrasts.
See To adjust gamma “Gamma”” (page 21).
• A variety of Screen Size can be selected, such as dot by dot (image is displayed without scaling the input
signals), Letterbox, Overscan (change of the display area of the input image)
See 2-5. Screen Size Changing” (page 26).
• The software “ScreenManager Pro for LCD (DDC/CI)” to adjust the screen using the mouse and keyboard
is included.
See “1-3. EIZO LCD Utility Disk” (page 10).
• Remote control enables easy operation, setting and adjustment of the monitor.
See “1-2. Controls and Functions” (page 8).
• Color sheets (in three colors) to be pasted at the bottom of the monitor included
Select your desired color to add an accent to the monitor.
See “Setup Guide”.
• HDCP (High-bandwidth Digital Content Protection)
• Built-in stereo speakers and headphone jack
See “1-2. Controls and Functions” (page 8).
8
Chapter1Introduction
1-2. Controls and Functions
Monitor
PowerManager
Menu
Color
Sound
Screen
Monitor Settings
Information
14
12
13
1 2 3 4 5 6 107 8 9 11
1. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction(page34).
2. Remote control
detector
Receivesthesignalfromtheremotecontrol.
3.
button
Switchesinputsignalsfordisplay(page36).
PC1(DVI)→PC2(D-SUB)→HDMI1→HDMI2
4.
/ button Displaysthevolumeadjustmentmenutovolumeupordown.
5.
button Turnsthepoweronoroff.
6. Power indicator
Indicatesthemonitor’soperationstatus.
Blue: Operating
Orange: Powersavingmode
Red Poweroff
OFF: Mainpoweroff
7. Main power switch Turnsthemainpoweronoroff.
8. Power connector Connectsthepowercord.
9. Input signal connector
Left:HDMIconnector×2(HDMI1,HDMI2)/Center:DVI-Dconnector/
Right:D-Submini15-pinconnector
10. Stereo mini jack Connectsthestereominijackcable.
11. Headphone jack Connectstheheadphones.
12. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
13. Stand
*2
Usedtoadjusttheangleofthemonitorscreen.
14. Speaker Outputsaudiosource.
*1
Seepage11forhowtouse.
*2
Anoptionalarm(oranoptionalstand)canbeattachedbyremovingthestand(see“7-1.HowtoAttachtheOptional
Arm”(page41)).
Settingmenu
*1
9
Chapter1Introduction
Remote Control
4
6
7
32
12
13
8
5
1
10
9
11
1. OFF TIMER Setsthetimeuntilthemonitorpower-off.
2. DISPLAY Displaysthecurrentinputport.
3. SCREEN SIZE Changesthescreensize.
4. POWER Turnsthepoweronoroff.
5. INPUT SELECT Switchesinputsignalsfordisplay.
PC
PC1(DVI)→PC2(D-SUB)
HDMI
HDMI1→HDMI2
6. MUTE Mutessoundtemporarily.
7. VOLUME +/- Adjuststhevolume.
8. MENU Displays/ExitstheSettingmenu.
9. RETURN Returnstothepreviousmenuinmenuoperation.
10.
/ / /
• Choosesandincreases/decreasesadjustmentsettings
foradvancedadjustmentusingtheSettingmenu.
•
/ :Displaysthebrightnessadjustmentmenu(page
17).
11. ENTER
Determinesanitemonthemenuscreen,andsaves
valuesadjusted.
12. MODE Changesthecolormode.
13. EcoView Displays/ExitstheEcoViewmenu.
Before Using Remote Control
How to install battery
1. While pushing the tab toward the arrow (1), pull out the
battery case (2).
(1)
(2)
2. Insert a battery with the positive side up. (Battery model
number: CR2032)
3. Insert the battery case until it clicks.
Receivable Range of Remote Control
Use the remote control inside of the range as below.
5m
5m
20°
20°
7m
5m
30°
30°
7m
5m
10
Chapter1Introduction
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk
contents and the overview of the software programs.
Disk contents and software overview
The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt le on the disk
for software startup procedures or le access procedures.
Item Overview
Windows
Macintosh
AReadme.txtle
Screenadjustmentpatternles Usedwhenadjustingtheimageofanalog
signalinputmanually.
ScreenManagerProforLCD(DDC/
CI)
Softwareforadjustingthescreenusingthe
mouseandkeyboard
ThissoftwaredoesnotrunonaPC
connectedviatheHDMIinput.
-
EIZOScreenSlicer Softwarethatdividesascreenandlaysout
multiplewindowsefciently.
-
User’sManualofthismonitor(PDFle)
To use “ScreenManager Pro for LCD(DDC/CI)/EIZO ScreenSlicer
For the installation and use of “ScreenManager Pro for LCD(DDC/CI)/EIZO SceenSlicer, refer to the
respective User’s Manual on the disk.
11
Chapter1Introduction
1-4. Basic Operations and Functions
Basic operation of the Setting menu
1.
Displaying the Setting menu
1. Press on the remote control. The Setting menu appears.
PowerManager
Menu
Color
Sound
Screen
Monitor Settings
Information
2.
Adjusting/Setting
1. Choose a menu to adjust/set with , , and then press . The Sub menu appears.
Color
Color Mode
Black Level
Hue
Saturation
Contrast
Return
Color Reset
Advanced Settings
Brightness
Temperature
[       ]
[       ]
[       ]
[       ]
[       ]
[       ]
[       ]
80
50
75
0
0
Off
User1
2. Choose an item to adjust/set with , , and then press . The adjustment/ setting menu appears.
60
Brightness
3. Adjust/set the selected item with , , , , and then press .
3.
Exiting
1. Press .
Note
To go back to the previous menu, press .
12
Chapter1Introduction
Functions
The following table shows all the Setting menus adjustment and setting menus.
Main menu Setting Reference
Color
*1
ColorMode 2-3.AdjustingColor”(page15)
Brightness
BlackLevel
Contrast
Saturation
Hue
Temperature
AdvancedSettings ContrastEnhancer
PowerResolution
Gamma
Gain
Overdrive
ColorReset
Screen AutoScreenAdjust
*2
2-4.ScreenAdjustment”(page22)
AutoRangeAdjust
*2
Clock
*2
Phase
*2
Position
*2
ColorSpace
*3
Smoothing
Sound Source
*3
3-2.Switchingsoundsourcefor
HDMIsignalinput“Source””(page28)
SoundLevel 3-3.Toadjustthesoundlevel
“SoundLevel””(page29)
PowerSave 4-1.SettingPowerSaving“Power
Save””(page32)
PowerManager PowerSave
MonitorSettings DDC/CI 3-4.Enabling/DisablingDDC/CI
communication
DDC/CI”(page29)
KeyLock 3-5.LockingButtonsKeyLock”
(page29)
Logo 3-6.SettingtheEIZOLogoDisplay
Logo””(page30)
PowerIndicator 4-2.SettingPowerIndicator“Power
Indicator””(page33)
Language 3-7.SettingLanguage“Language””
(page30)
Reset 3-9.ResettingtheMonitortothe
DefaultSettings”(page31)
Information “7-3.DisplayingMonitorInformation
“Information””(page42)
*1
Theadjustment/settingsavailableonthe“Color”menudependontheselectedColormode.Theabove
tableshowsthesubmenuswhentheUser1orUser2modeisselected.
*2
Thesefunctionscanbeadjustedwithanaloginput.
*3
ThisfunctionisavailablewithHDMIsignalinput.
13
Chapter2AdjustingScreens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions/Formats
The monitor supports the following resolutions and signal format.
Analog Input (D-Sub)
Resolution Applicable Signals
Vertical Scan
Frequency
Dot Clock
640×480 VGA,VESA,CEA-861 upto75Hz
148.5MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA upto75Hz
1024×768 VESA upto75Hz
1280×720 CEA-861 60Hz
1280×960 VESA 60Hz
1280×1024 VESA upto75Hz
1680×1050 VESACVT,VESACVTRB 60Hz
1920×1080* CEA-861 60Hz
Digital Input (DVI-D, HDMI: PC signal)
Resolution Applicable Signals
Vertical Scan
Frequency
Dot Clock
640×480 VGA,CEA-861 60Hz
148.5MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA 60Hz
1024×768 VESA 60Hz
1280×720 CEA-861 60Hz
1280×960 VESA 60Hz
1280×1024 VESA 60Hz
1680×1050 VESACVT,VESACVTRB 60Hz
1920×1080* CEA-861 60Hz
A graphics board in conformance with the VESA and CEA-861 standards is required.
*
Recommended resolution
Digital Input (HDMI: video signal)
• Video signal
-
VGA / 525i (480i)/525p (480p)/1125i (1080i)/750p (720p)/1125p (1080p): 60 Hz
-
625i (576i)/625p (576p)/1125i (1080i)/750p (720p)/1125p (1080p): 50 Hz
• Audio signal
-
2ch linear PCM (32 kHz / 44.1 kHz / 48 kHz)
14
Chapter2AdjustingScreens
2-2. Setting the Resolution
When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change
the resolution, follow the procedure below.
Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Screen resolution”.
3. On the “Screen Resolution” dialog box, select the monitor.
4. Click “Resolution” to select the desired resolution.
5. Click the [OK] button.
6. When a conrmation dialog box is displayed, click [Keep changes].
Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the
“Resolution” eld.
5. Click the [OK] button.
6. When a conrmation dialog box is displayed, click [Yes].
Windows XP
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Properties”.
3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired
resolution for “Screen resolution” under “Display”.
4. Click the [OK] button to close the dialog box.
Mac OS X
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions”
eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution, close
the window.
15
Chapter2AdjustingScreens
2-3. Adjusting Color
To select the display mode (Color Mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode Purpose
User1 Selectoneoftheseusermodestodeneadesiredsetofparametersettings.
User2
sRGB SuitableforcolormatchingwithsRGBcompatibleperipherals.
Paper Producesaprintedpapereffectbydecreasingcontrastandcolortemperature.
Game Suitablefordisplayinggameimages.
Cinema Suitablefordisplayingmovie-likeimages.
Color Mode
User1
Displaysthecurrentmode.
Procedure
1. Press
on the remote control.
The mode name appears at the center of the screen.
2. The mode among the list is highlighted in turn each time is pressed.
You can switch the current mode with or while the mode menu is being displayed.
→User1→User2←→sRGB←→Paper←→Game←→Cinema←
Note
The Setting menu and the Mode menu cannot be displayed at the same time.
“ScreenManager Pro for LCD (DDC/CI)” allows you to select the Color mode automatically according to the
application used (see “Chapter 3 Auto Fine-Contrast” in the “ScreenManager Pro for LCD (DDC/CI)” User’s
Manual).
16
Chapter2AdjustingScreens
To perform advanced adjustments
The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each
mode.
Attention
The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
Perform the range adjustment rst when adjusting color for analog signals (see To adjust color gradation
automatically “Auto Range Adjust”” (page 25)).
The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.
Make ne color adjustment visually when matching colors on multiple monitors.
Note
The value shown in “K” is available only as reference.
Using the “ScreenManager Pro for LCD (DDC/CI)” allows you to perform the color adjustment by using the mouse
and keyboard of your PC. (Refer to “Chapter 4 Color Adjustment” in the User’s Manual for “ScreenManager Pro for
LCD (DDC/CI)”.)
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
For instructions on how to adjust or set each function, refer to subsequent pages.
: Adjustable -: Not adjustable
Function
Color Mode
User1
User2
sRGB Paper Game Cinema
Brightness
BlackLevel - -
Contrast - -
Saturation - -
Hue - -
Temperature -
AdvancedSettings ContrastEnhancer - -
PowerResolution - -
Gamma - - -
Gain - - - -
Overdrive - - -
ColorReset
17
Chapter2AdjustingScreens
To adjust brightness “Brightness”
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD
back panel).
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Brightness” in the “Color” menu, and press
.
The “Brightness” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
While the Setting menu is not displayed, or on the remote control is available for adjustment.
If you feel that the image is too bright even if the brightness is set to 0 or that the image is too dark even if the
brightness is set to 100, adjust the contrast.
To adjust black level “Black Level”
You can adjust the black level of images.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Black Level” in the “Color” menu, and press
.
The “Black Level” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
After completing black level adjustment, readjust the contrast as appropriate.
18
Chapter2AdjustingScreens
To adjust contrast “Contrast
The brightness of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Contrast” in the “Color” menu, and press
.
The “Contrast” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
In the contrast of 50, every color gradation is displayed (for PC input signal only).
When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
Perform the contrast adjustment in the following cases.
- When you feel the image is too dark even if the brightness is set to 100 (Set the contrast to higher than 50.)
- When you feel the image is too bright even if the brightness is set to 0 (Set the contrast to lower than 50.)
To adjust the color saturation “Saturation”
This function allows you to adjust color saturation.
Adjustable range
-50 to 50
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Saturation” in the “Color” menu, and press
.
The “Saturation” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Attention
Using this function may make some color gradations unavailable for display.
Note
The minimum value (-50) changes the screen to monochrome.
19
Chapter2AdjustingScreens
To adjust hue “Hue”
This function allows you to adjust hue.
Adjustable range
-50 to 50
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Hue” in the “Color” menu, and press
.
The “Hue” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Attention
Using this function may make some color gradations unavailable for display.
To adjust color temperature “Temperature”
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame
temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 4000K-10000K (specied by every 500K unit, including 9300K)
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Temperature” in the “Color” menu, and press
.
The “Temperature” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
“Gain” allows you to perform more advanced adjustment (see “To adjust gain “Gain”” (page 21)).
If you set to “Off, the image is displayed in the preset color of the monitor (Gain: 100 for each RGB).
When gain is changed, the color temperature is changed to “Off.
20
Chapter2AdjustingScreens
To set ContrastEnhancer “ContrastEnhancer
This function allows you to set whether to automatically adjust the contrast according to the darkness or
brightness of a scene, for example.
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “ContrastEnhancer” in the “Advanced Settings” menu, and press
.
The “ContrastEnhancer” menu appears.
4. Select “Enable” or “Disable” with or .
5. Press
to exit the adjustment.
Note
Setting “Enable” allows you to display high contrast and sharp images.
To reduce image blur “Power Resolution”
You can reduce image blur by enhancing its outline.
Adjustable range
Off, 1, 2, 3
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Power Resolution” in the “Advanced Settings” menu, and press
.
The “Power Resolution” menu appears.
4. Use or for adjustment.
5. Press
to exit the adjustment.
Note
If you keep pressing the or button for two seconds or more while “Power Resolution” is displayed, the
monitor enters the demo mode. To return to normal display, keep pressing
or for at least two seconds.
- Left half of screen: Power Resolution On
- Right half of screen: Power Resolution Off
21
Chapter2AdjustingScreens
To adjust gamma “Gamma”
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the
variation rate is not proportional to the input signal. To keep the balance between the input signal and the
brightness of the monitor is called as “Gamma correction”.
Adjustable range
1.8, 2.0, 2.2, 2.4, 2.6, 2.8, Power1, Power2
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Gamma” in the “Advanced Settings” menu, and press
.
The “Gamma” menu appears.
4. Use or for adjustment.
5. Press
to exit the adjustment.
Note
Choosing “Power1” will help to sharpen halftone images by increasing their contrast.
Choosing “Power2” will help to make dark images visible by increasing the low-tone contrast.
To adjust gain “Gain”
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of
“white” by adjusting gain.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Gain” in the “Advanced Settings” menu, and press
.
The “Gain” menu appears.
4. Adjust gain with or for each of red, green, and blue.
5. Press
to exit the adjustment.
Attention
Using this function may make some color gradations unavailable for display.
Note
The value of gain changes with that of color temperature.
When gain is changed, the color temperature is changed to “Off.
22
Chapter2AdjustingScreens
To set overdrive intensity “Overdrive”
This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image
lags by setting it to “Enhanced” when displaying animated images.
Adjustable range
Enhanced, Standard, Off
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Overdrive” in the “Advanced Settings” menu, and press
.
The “Overdrive” menu appears.
4. Use or for adjustment.
5. Press
to exit the adjustment.
Attention
The overdrive function is disabled in the following cases:
- The vertical scan frequency of input signals is more than 60 Hz
- The screen size is “Normal” (excluding the case that the display resolution is 1920 x 1080) or “Letterbox”
2-4. Screen Adjustment
Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 26).
When performing more advanced adjustment, see “2-3. Adjusting Color” (page 15) and subsequent pages.
Analog Signal Input
Attention
The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 ×
600 (SVGA).
The self adjustment (or automatic screen adjustment) function works correctly when an image is fully displayed over
the Windows or Macintosh display area. They do not work properly in the cases below:
- When an image is displayed only on a part of the screen (command prompt window, for example)
- When a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position and
screen size correctly according to the PC to be used.
Note
The Self Adjust function works when all of the following conditions are satised:
- When a signal is input into the monitor for the rst time or when a resolution or vertical/horizontal scan frequency
not used before is set
If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
23
Chapter2AdjustingScreens
Setting Procedures
1.
Perform the auto adjustment.
To adjust ickering, screen position, and screen size automatically “Auto Screen
Adjust
Procedure
1. Choose “Screen” in the Setting menu, and press
.
2. Choose “Auto Screen Adjust” in the “Screen” menu, and press
.
3. Select “Yes” with
or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming“1.Performtheautoadjustment.”(page23),
performtheadjustmentsaccordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayed
correctly,goto5.Adjustingcolorgradation.”(page25).
2.
Prepare to use analog screen adjustment patterns.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern les”.
Note
For details and instructions on opening the “Screen adjustment pattern les”, refer to the Readme.txt le.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
To adjust ickering, screen position, and screen size automatically “Auto Screen
Adjust
Procedure
1. Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Choose “Screen” in the Setting menu, and press .
3. Choose “Auto Screen Adjust” in the “Screen” menu, and press
.
4. Select “Yes” with
or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming3.Performtheautoadjustmentagain
withtheanalogscreenadjustmentpatterndisplayed.”(page23),performtheadjustmentsaccordingto
theproceduresonthefollowingpages.Ifthescreenisdisplayedcorrectly,goto5.Adjustingcolor
gradation.”(page25).
24
Chapter2AdjustingScreens
4.
Choose “Screen” from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
To eliminate vertical bars “Clock”
Procedure
1. Choose “Clock” in the “Screen” menu, and press
.
The “Clock” menu appears.
2. Adjust the clock with or to eliminate vertical bars.
Press or slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, ickering or bars appear on the screen after adjustment, proceed to “Phase” to remove ickering or
blurring.
To remove ickering or blurring “Phase”
Procedure
1. Choose “Phase” in the “Screen” menu, and press
.
The “Phase” menu appears.
2. Adjust the phase with or to minimize ickering or blurring.
3. Press
to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars “Clock”.
(Clock → Phase → Position)
Attention
Flickering or blurring may not be eliminated depending on your PC or graphics board.
25
Chapter2AdjustingScreens
To correct the screen position “Position”
Note
Since the number of pixels and the pixel positions are xed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose “Position” in the “Screen” menu, and press
.
The “Position” menu appears.
2. Adjust the position with / / / .
3. Press
to exit the adjustment.
4. Close Pattern 1.
5.
Adjusting color gradation.
To adjust color gradation automatically “Auto Range Adjust
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Choose “Screen” in the Setting menu, and press .
3. Choose “Auto Range Adjust” in the “Screen” menu, and press
.
The “Auto Range Adjust” menu appears.
4. Select “Yes” with or , and press .
The output range is set automatically.
5. Close Pattern 2.
27
Chapter2AdjustingScreens
Digital Input (HDMI: video signal)
The screen size can be changed with the “Screen Size” function.
Setting Function Screen Display
Auto Themonitorautomaticallychangesthescreen
sizeaccordingtotheaspectratioandresolution
informationfromtheexternaldevice.Thiscanbeset
onlyforHDMI(SDSignal)input.
FullScreen Displaysanimageinfullscreen.Imagesare
distortedinsomecasesbecausetheverticalrateis
notequaltothehorizontalrate.
Enlarged Displaysanimageinfullscreen.Insomecases,
ablankhorizontalorverticalborderappearsto
equalizetheverticalrateandthehorizontalrate.
Letterbox DisplaysLetterboxof16:9infullscreen.Exceptfor
Letterbox,theupperandlowerpartsoftheprojected
imagearecut.ThiscanbesetonlyforHDMI(SD
Signal)input.
Normal
*1
Theimageisdisplayedwithoutscalingtheinput
signals.
*1
When“ScreenSize”is“Normal,“Overscan”isxedat“Off.
Procedure
1. Press
on the remote control.
Each time you press , the size changes.
Attention
Selecting “Normal” may make some color gradations unavailable for display.
To set the screen ratio “Overscan”
In order to hide distortion or noise at the image’s edge, the display area of the input image can be changed so
that peripheral images are not displayed.
Setting Function
On Displaysaninputimageinthescreenbytrimmingtheverticalandhorizontalpartsofthe
image.
Off Displaysmostoftheinputimage.
Procedure
1. Press
on the remote control.
The “Screen Size” menu appears.
2. Select “Overscan” with .
3. Use
or for adjustment.
4. Press
to exit the adjustment.
Attention
When “Screen Size” is “Normal”, “Overscan” is xed at “Off.
29
Chapter3SettingMonitor
3-3. To adjust the sound level “Sound Level”
The input sound level can be adjusted.
The volume difference may occur depending on the kinds of input signals, since the average sound level of the
external device differs.
Adjustable range
-1 to 1
Procedure
1. Choose “Sound” in the Setting menu, and press
.
2. Choose “Sound Level” in the “Sound” menu, and press
.
The “Sound Level” menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
For example, if the volume difference of PC1 and PC2 input signals becomes large, you can reduce the volume
difference between them by raising the “Sound Level” of the lower volume side.
3-4. Enabling/Disabling DDC/CI communication
“DDC/CI”
This function allows you to enable/disable the DDC/CI communication (see “7-5. Glossary” (page 46)).
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “DDC/CI” in the “Monitor Settings” menu, and press
.
The “DDC/CI” menu appears.
3. Select “Enable” or “Disable” with or .
4. Press
to exit the adjustment.
Note
HDMI input does not support DDC/CI communication.
3-5. Locking Buttons “Key Lock”
This function allows you to lock the buttons on the monitor.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Key Lock” in the “Monitor Settings” menu, and press
.
The “Key Lock” menu appears.
3. Select “On” with or .
4. Press
to exit the adjustment.
Note
The following operations are available even if the buttons are locked:
- Turning on or off the monitor with the Power button
Does not lock the remote control operation.
30
Chapter3SettingMonitor
3-6. Setting the EIZO Logo Display “Logo
When the monitor is turned on, the EIZO logo appears on the screen. You can choose to display or not to
display the EIZO logo.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Logo” in the “Monitor Settings” menu, and press
.
The “Logo” menu appears.
3. Select “On” or “Off” with or .
4. Press
to exit the adjustment.
3-7. Setting Language “Language
This function allows you to select a language for the Setting menu or displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese/Simplied Chinese/Traditional Chinese
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Language” in the “Monitor Settings” menu, and press
.
The “Language” menu appears.
3. Choose a language with or .
4. Press
to exit the adjustment.
3-8. Changing the HDCP authentication setting for
HDMI signal input
The external device cannot be authenticated successfully according to your external device and the screen
cannot be displayed. In this case, follow the procedures below to change the HDCP from the normal to extended
state.
Procedure
1. Press
on the remote control or on the monitor to turn OFF the monitor power.
2. Press
on the monitor for ve seconds or more.
The setting changes and the monitor power is turned on.
Note
The current setting status can be identied based on the color used to display the input port or signal error.
Setting Input port Signal Error
Normal
HDMI1
HDMI1
Signal Error
Extended
HDMI1
HDMI1
Signal Error
31
Chapter3SettingMonitor
3-9. Resetting the Monitor to the Default Settings
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and
Full Reset for resetting all settings to the defaults.
Attention
After resetting, you cannot undo the operation.
Note
Regarding the default setting, see “Main Default Settings” (page 44).
To reset the color adjustments “Color Reset
This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Color Reset” in the “Color” menu, and press
.
3. Select “Yes” with
or .
4. Press
.
The color adjustments revert to the default settings.
To reset all adjustments to the default settings “Reset
This function resets all adjustments to the default settings.
Attention
The reset operation cannot return the HDCP authentication setting (“3-8. Changing the HDCP authentication setting
for HDMI signal input” (page 30)) to the default setting.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Reset” in the “Monitor Settings” menu, and press
.
3. Select “Yes” with
or .
4. Press
.
All adjustments revert to the default settings.
32
Chapter4PowerSavingFunctions
Chapter 4 Power Saving Functions
4-1. Setting Power Saving “Power Save”
Monitor
This function allows you to specify whether to set the monitor into the power saving mode, depending on the
state of an external device connected to it. When the monitor has shifted to the power saving mode, the
images on the screen are not displayed.
Attention
Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
Power consumption varies even when the stereo mini jack cable is connected.
Note
The monitor changes to the power saving mode about 15 seconds after the signal input ceases to be detected.
Procedure
1. Choose “PowerManager” in the Setting menu, and press
.
2. Choose “Power Save” in the “PowerManager” menu, and press
.
The “Power Save” menu appears.
3. Select “Enable” or “Disable” with or .
4. Press
to exit the adjustment.
Power Saving System
Analog Signal Input
This monitor complies with the VESA DPM standard.
PC Monitor Power Indicator
On Operating Blue
Powersaving
mode
STAND-BY
SUSPENDED
OFF
Powersavingmode Orange
PowerOff Powersavingmode Orange
Digital Signal Input
When the external device connected is a PC
This monitor complies with the DVI DMPM standard.
PC Monitor Power Indicator
On Operating Blue
Powersavingmode Powersavingmode Orange
PowerOff Powersavingmode Orange
When the external device connected is not a PC
Ext. Device Monitor Power Indicator
PowerOn Operating Blue
PowerOff Powersavingmode Orange
34
Chapter4PowerSavingFunctions
4-3. Enabling/Disabling Automatic Brightness
Adjustment “Auto EcoView
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably by using the Auto EcoView function.
Attention
Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press
on the remote control.
The “EcoView” menu appears.
2. Select “On” or “Off” with or .
3. Press
to exit the adjustment.
Note
As “Brightness” in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.
4-4. Checking the power saving level
The EcoView menu allows you to check Power Reduction, CO2 Reduction, and Eco Performance Level. The
more indicators light up representing the Eco Performance Level, the higher the power saving level attained.
Indicator
Procedure
1. Press
on the remote control.
The “EcoView” menu appears.
4-5. Enabling/Disabling Auto Power-OFF “Off Timer
(min)
This function allows you to set the time to power off the monitor automatically.
Adjustable range
Disable, 30, 60, 90, 120, 150, 180
Procedure
1. Press
on the remote control.
Each time you press , the set time changes.
35
Chapter4PowerSavingFunctions
Canceling Off Timer
1. Press
until “Disable” appears.
Checking the remaining time
1. Press
when the Off Timer is set.
The time to turn off the power appears.
Extending the time of the Off Timer
1. Press
while the remaining time is displayed.
Each time you press , the time is extended.
36
Chapter5ConnectingCables
Chapter 5 Connecting Cables
5-1. Connecting Multiple External Devices
The product has multiple connections to external devices and allows you to switch to one of the connections for
display.
Attention
Do not use dual link cables.
Connection examples
DVI-HDMIconvertercable
(Commerciallyavailableproduct)
D-Submini
15-pinconnector
DVIconnector
Signalcable
(suppliedFD-C39)
Signalcable
(MD-C87option)
HDMIcable
*1
(Commerciallyavailableproduct)
HDMI
connector
AnalogDigital
(DVI)
Digital
(HDMI)
D-Sub
connector
Toext.device1
Toext.device2
Toext.device3,4
HDMIconnector
or
DVIconnector
DVI-Dconnector
To switch among input signals
Press or on the remote control to change the input signal.
When the signal is switched, the active input port name appears at the top right corner of the screen.
PC2(D-SUB)
Note
on the monitor also can change the input. (see 1-2. Controls and Functions” (page 8)).
*1
UseaproductabletohandleHighSpeed.
37
Chapter6Troubleshooting
Chapter 6 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
No picture
Problem Possible cause and remedy
1. No picture
• Powerindicatordoesnotlight.
• Checkwhetherthepowercordisconnectedproperly.
• Turnthemainpowerswitchon.
• Press
ontheremotecontrol(or onthe
monitor).
• Turnoffthemainpower,andthenturnitonagaina
fewminuteslater.
• Powerindicatorislightingblue. • Increase“Brightness”,“Contrast,or“Gain”inthe
Settingmenu(see“Toperformadvancedadjustments”
(page16)).
• Powerindicatorislightingorange. • Checkwhetherthesignalcableisconnectedproperly.
• Checkwhethertheexternaldeviceisturnedon.
• Operatethemouseorkeyboard.
• Switchtheinputsignal.
• IfanexternaldeviceispluggedintotheHDMIport,
changetheHDCPauthenticationsetting.Poweroff
onceandthenpress
onthemonitorforve
secondsormoretochangethesettingandthenturn
onthepoweragain.(see3-8.ChangingtheHDCP
authenticationsettingforHDMIsignalinput”(page30)).
2. The message below appears. Thismessageappearswhenthesignalisnotinput
correctlyevenwhenthemonitorfunctionsproperly.
Example:
PC2(D-SUB)
Signal Error
• Themessageshowsthattheinputsignalisoutofthe
speciedrange.
• Whentheanalogsignal(D-Sub)/digitalsignal(DVI-D,
HDMI:PCsignal)isinput,takethemeasuresbelow:
-
CheckwhetherthePCisconguredtomeetthe
resolutionandverticalscanfrequencyrequirements
ofthemonitor(see2-1.CompatibleResolutions/
Formats”(page13)).
-
RebootthePC.
-
Selectanappropriatedisplaymodeusingthe
graphicsboard’sutility.Refertothemanualofthe
graphicsboardfordetails.
38
Chapter6Troubleshooting
Imaging problems (for both digital and analog)
Problem Possible cause and remedy
3. The screen is too bright or too dark. • Use“Brightness”or“Contrast”intheSettingmenuto
adjustit.(TheLCDmonitorbacklighthasalimitedlife
span.Whenthescreenbecomesdarkorbeginsto
icker,contactyourlocaldealer.)
• TurnontheAutoEcoViewfunction.Themonitor
detectstheenvironmentalbrightnesstoadjustthe
screenbrightnessautomatically.
4. Characters are blurred. • CheckwhetherthePCisconguredtomeetthe
resolutionandverticalscanfrequencyrequirements
ofthemonitor(see2-1.CompatibleResolutions/
Formats”(page13)).
• Use“Smoothing”intheSettingmenutoadjustit(see
Tomodifyblurredcharacters/lines“Smoothing””
(page26)).
5. Afterimages appear. • AfterimagesareparticulartoLCDmonitors.Avoid
displayingthesameimageforalongtime.
• Usethescreensaverorpowersavefunctiontoavoid
displayingthesameimageforextendedperiodsof
time.
6. Green/red/blue/white dots or defective
dots remain on the screen.
• ThisisduetoLCDpanelcharacteristicsandisnota
failure.
7. Interference patterns or pressure marks
remain on the screen.
• Leavethemonitorwithawhiteorblackscreen.The
symptommaydisappear.
8. Noise appears on the screen. • IntheSettingmenu,set“Overdrive”to“Off”(seeTo
setoverdriveintensity“Overdrive””(page22)).
• WhenenteringthesignalsofHDCPsystem,the
normalimagesmaynotbedisplayedimmediately.
9. The screen is whitish or blackish. • Use“ColorSpace”ofthe“Screen”submenu(forthe
HDMIinput),“BlackLevel”(seeToadjustblacklevel
“BlackLevel””(page17)),and“Contrast”(seeToadjust
contrast“Contrast””(page18))intheSettingmenuto
adjustit.
Imaging problems (for digital only)
Problem Possible cause and remedy
10. The color shown on the display is not
correct (for HDMI input).
• Changethecolorspaceofthevideosignalin“Screen”
-“ColorSpace”undertheSettingmenu.
11. The screen ashes (for HDMI input) • Transmittablesignalsdifferonthecategoryofthe
HDMIcable.CheckwhetherthecablesupportHigh
Speed.
40
Chapter6Troubleshooting
Other problems
Problem Possible cause and remedy
15. The “Smoothing” on the Setting menu
“Screen” cannot be selected.
• Youcannotchoose“smoothing”whenthescreenis
displayedinthefollowingresolutionsorsettings.
-
Theresolutionis1920×1080
-
ScreenSizeis“Normal”
16. The auto adjustment function does not
work.
• Thisfunctiondoesnotworkduringdigitalsignalinput.
• ThisfunctionisintendedforuseontheMacintosh
andonAT-compatiblePCrunningWindows.Itdoes
notworkproperlywhenanimageisdisplayedonly
onapartofthescreen(commandpromptwindow,for
example)orwhenablackbackground(wallpaper,etc.)
isinuse.
• Thisfunctiondoesnotworkcorrectlywithsome
graphicsboards.
17. No audio output. • Checkwhetherthestereominijackcableisconnected
properly.
• Checkwhethervolumeissetto0.
• Checkthecurrentexternaldeviceandaudioplayback
softwaretoseewhethertheyareconguredcorrectly.
• IfHDMIinputisused,checkthecurrentexternal
deviceandthe“Source”settingintheSettingmenu
(see3-2.SwitchingsoundsourceforHDMIsignal
input“Source””(page28)).
18. “ScreenManager Pro for LCD (DDC/CI)”
does not run.
• “ScreenManagerProforLCD(DDC/CI)”doesnotrun
whenaPCisconnectedtotheHDMIinput.
19. Will not change to the power saving mode • Whenalltheconditionsbelowaremet,themonitor
doesnotchangetothepowersavingmodeevenif
PowerSave”issetto“Enable”:
-
“PowerSave”forSoundissetto“SoundOn”(Audio
Output”(page33))
-
Inthemutestate(“Tomutethesoundtemporarily”
(page28))
Inthesecases,resetthemute.
41
Chapter7Reference
Chapter 7 Reference
7-1. How to Attach the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web
site for the corresponding optional arm (or optional stand). http://www.eizo.com
Attention
When attaching an arm or stand, follow the instructions of their user’s manual.
When using another manufacturer’s arm or stand, conrm the following in advance and select one conforming to the
VESA standard. Use the M4 × 12 mm screws supplied with this product.
- Clearance between the screw holes: 100 mm × 100 mm
- Thickness of plate: 2.6 mm
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.
When using an arm or stand, attach it to meet the following tilt angles of the monitor.
- Up 4, down 45° (horizontal display, and vertical display rotated 90 degrees clockwise)
Connect the cables after attaching an arm or stand.
The monitor and arm or stand are heavy. Dropping them may result in injury or equipment damage.
Procedure
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Remove the Stand base.
Turn the xing screws for the Stand base to detach it.
3.
Attach the arm or stand to the monitor.
Secure the monitor to the arm or stand using the screws specied in the user’s manual of the arm or stand.
42
Chapter7Reference
7-2. Attaching the Stand base
The once removed the Stand base can be attached to the monitor again with the following procedures.
Procedure
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Attach the Stand base.
Hold the Stand base with the arrow “ ” facing upward, align the two holes (a) of the Stand base with the two
tabs (b) at the bottom of the monitor, and snap the tabs into the holes.
b
a
3.
Turn the supplied screw in the “LOCK” direction to lock the Stand base.
Tightenscrew,thenpressknobflat.
7-3. Displaying Monitor Information “Information
This function allows you to display the model name, serial number, usage time, resolution, and input signal.
Procedure
1. Choose “Information” in the Setting menu, and press
.
The “Information” menu appears.
Attention
The usage time is not always “0” when you purchase the monitor due to factory inspection.
43
Chapter7Reference
7-4. Specications
LCDPanel Size 23.0-inch(580mm)
Type TFTcolorLCD,VA
Surfacetreatment Anti-GlareHardCoating
Surfacehardness 3H
Viewingangles Viewingangles:Horizontal178°,vertical178°(CR≥10)
DotPitch 0.2655mm
ResponseTime Black-white-black:Approx.25ms
Gray-to-gray:Approx.7ms(Overdrivesetting:Enhanced)
Contrastratio 3000:1(whenContrastEnhancersettingis“On”10000:1)
HorizontalScan
Frequency
Analog 31-81kHz
Digital DVI 31-68kHz
HDMI 15-68kHz
VerticalScan
Frequency
Analog 55-76Hz(non-interlace)
Digital DVI 59-61Hz(non-interlace)
(VGATEXT:69-71Hz)
HDMI 49-61Hz(VGATEXT:69-71Hz)
Applicablevideosignalformats
VGA/525i(480i)/525p(480p)/1125i(1080i)/750p(720p)/1125p(1080p):60Hz
625i(576i)/625p(576p)/1125i(1080i)/750p(720p)/1125p(1080p):50Hz
Applicableaudiosignalformats 2chlinearPCM(32kHz/44.1kHz/48kHz)
Resolution 1920Dots×1080Lines
Max.DotClock 148.5MHz
Max.DisplayColor Approx.16.77millioncolors(1064.33millioncolors/10bitLUT)
DisplayArea(H×V) 509.76mm×286.74mm(20.1inch×11.3inch)
PowerSupply 100-120VAC±10%,50/60Hz0.75A
200-240VAC±10%,50/60Hz0.45A
Power
Consumption
ScreenDisplayOn 45Worless(Speakerworking)
43Worless(Speakernotworking)
Powersavingmode 1.0Worless(forD-Subsinglesignalinput,whenstereominijack
cableisnotconnected)
PowerOff 0.17Worless
MainPowerOff 0W
InputSignalConnector D-Submini15-pin
DVI-Dconnector(ApplicabletoHDCP)
HDMITypeA
*1
×2
AnalogInputSignal(Sync) Separate,TTL,positive/negative
AnalogInputSignal(Video) Analog,Positive(0.7Vp-p/75Ω)
DigitalSignalTransmission TMDS(SingleLink)
Videosignalmemory(Max.) D-Subinput:45types,DVI-Dinput:10types,
HDMI1input:10types,HDMI2input:10types
AudioOutput Speakeroutput:0.5W+0.5W(8Ω,THD+N:1%orless)
Headphoneoutput:2mW+2mW
LineInput Inputimpedance:44kΩ(typ.)
Inputlevel:2.0Vrms(Max.)
Plug&Play VESADDC2B/EDIDstructure1.3
*1
HDMICEC(ormutualcontrol)isnotsupported.
44
Chapter7Reference
Dimensions
(Width)×
(Height)×
(Depth)
Mainunit 549mm(21.6inch)×403mm(15.9inch)×212mm(8.3inch)
Mainunit(withoutstand) 549mm(21.6inch)×393mm(15.5inch)×58mm(2.28inch)
Mass Mainunit Approx.6.9kg(15.2lbs)
Mainunit(withoutstand) Approx.6.1kg(13.4lbs)
Movablerange Tilt:20°Up,-5°Down
Environmental
Conditions
Temperature Operating:5°Cto35°C(41°Fto95°F)
Transportation/Storage:-20°Cto60°C(-4°Fto140°F)
Humidity Operating:20%to80%R.H.(nocondensation)
Transportation/Storage:10%to90%R.H.(nocondensation)
AirPressure Operating:700to1,060hPa
Transportation/Storage:200to1,060hPa
Main Default Settings
ColorMode D-Sub/DVI-Dinput:User1
HDMIinput:Game
OffTimer Disable
ScreenSize D-Sub/DVI-Dinput:Fullscreen
HDMI(PCsignal/HDsignal)input:Fullscreen
HDMI(SDsignal)input:Auto
AutoEcoView On
Smoothing 3
SoundLevel 0
Sound-PowerSave SoundOff
PowerManager-PowerSave Enable
DDC/CI Enable
KeyLock Off
Logo On
PowerIndicator Enable
Language English
45
Chapter7Reference
Outside Dimensions
Unit:mm(inch)
18.6
(0.73)
511.8(20.1)
549(21.6)
38
(1.5)
365(14.4)
486(19.1)
32(1.26)
58
(2.28)
180(7.1)
171(6.7)
212(8.3)
62
(2.44)
14(0.55)
14(0.55)
20°
216(8.5)
224.5(8.8)100(3.9)224.5(8.8)
113(4.4)100(3.9)152(6)
403(15.9)
18.6
(0.73)
288.8(11.4)57.6
(2.27)
TILT
214(8.4)
Accessories
CleaningKit EIZO“ScreenCleaner
Signalcable(D-Submini15-pin) MD-C87
For the latest information about the accessories, refer to our web site.
http://www.eizo.com
46
Chapter7Reference
7-5. Glossary
Clock
The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the
graphics system in use, when the analog signal is converted to a digital signal for image display. This is
called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
Color Space
Color space is a method to specify and express the color. There are YUV and RGB, etc. YUV expresses the
color by using the luminance (Y), the color difference of R (U) and the color difference of blue (V). RGB
does it by using the gradation of 3 colors of Red (R, Green (G) and Blue (B).
DDC/CI (Display Data Channel/Command Interface)
VESA provides the standardization for the interactive communication of the setting information, etc.
between a PC and the monitor.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors.
One is a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and
analog signal inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active
Off (power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by
the light passing through the panel color lter. Red, green and blue are the three primary colors. All the
colors on the screen are displayed by combining these three colors. The color tone can be changed by
adjusting the light intensity (volume) passing through each color’s lter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a
high-contrast image.
HDCP (High-bandwidth Digital Content Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc.
This helps to transmit the digital contents safely by coding the digital contents sent via the DVI or HDMI
connector on the output side and decoding them on the input side.
Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not
applicable to HDCP system.
47
Chapter7Reference
HDMI (High-Denition Multimedia Interface)
HDMI is a digital interface standard, developed for consumer electrical appliance or AV device. This
standard is issued on the basis of the DVI standard which is one of an interface specication for the
connection between a PC and a monitor. The projected image, sound and control signal without compressed
enable to be transmitted with one cable.
Overdrive
This technology enhances response speed by increasing the potential difference at the time of motion of
liquid-crystal pixels, and it is used for liquid-crystal TV sets and others in general. It provides clear-cut
three-dimensional display with little image lag, by improving response speed of the intermediate graduation
range that frequently appears in moving images.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is
made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted
correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that
range adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specied size, which are illuminated to form images. This
monitor consists of 1920 horizontal pixels and 1080 vertical pixels. At a resolution of 1920 × 1080, all pixels
are illuminated as a full screen (1:1).
sRGB (Standard RGB)
International standard for color reproduction and color space among peripheral devices (such as monitors,
printers, digital cameras, scanners). As a form of simple color matching for the Internet, colors can be
displayed using tones close to those of the transmission and reception devices.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The
screen becomes reddish at a low temperature, and bluish at a high temperature, like the ame temperature.
5000K: Slightly reddish white
6500K: White referred to as daylight-balanced color
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
TMDS is one of the signal transmission methods for the digital interface.
48
Chapter7Reference
VESA DPM (Video Electronics Standards Association - Display Power
Management)
VESA specications achieve increased energy efciency for computer monitors. This involves
standardization of signals sent from the computer (graphics board).
DPM denes the status of signals transmitted between the computer and monitor.
7-6. Preset Timing
The following table shows factory preset analog signal timing:
Attention
Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting
menu.
If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen display
may still be incorrect even after the adjustment.
When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the Setting
menu.
Resolution
Applicable
Signals
Frequency Polarity
Dot Clock:
MHz
Horizontal:
kHz
Vertical: Hz Horizontal Vertical
640×480 VGA/CEA-861 25.18 31.47 59.94 Negative Negative
720×400 VGATEXT 28.32 31.47 70.09 Negative Positive
640×480 VESA 31.50 37.50 75.00 Negative Negative
800×600 VESA 40.00 37.88 60.32 Positive Positive
800×600 VESA 49.50 46.88 75.00 Positive Positive
1024×768 VESA 65.00 48.36 60.00 Negative Negative
1024×768 VESA 78.75 60.02 75.03 Positive Positive
1280×720 CEA-861 74.25 45.00 60.00 Positive Positive
1280×960 VESA 108.00 60.00 60.00 Positive Positive
1280×1024 VESA 108.00 63.98 60.02 Positive Positive
1280×1024 VESA 135.00 79.98 75.03 Positive Positive
1680×1050 VESACVT 146.25 65.29 59.95 Negative Positive
1680×1050 VESACVTRB 119.00 64.67 59.88 Positive Negative
1920×1080 CEA-861 148.50 67.50 60.00 Positive Positive
49
Appendix
Appendix
Trademark
VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United
States and other countries.
Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft
Corporation in the United States and other countries.
Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are
registered trademarks of Apple Inc.
Acrobat, Adobe, Adobe AIR, and Photoshop are registered trademarks of Adobe Systems Incorporated in the
United States and other countries.
PowerPC is a registered trademark of International Business Machines Corporation.
Pentium is a registered trademark of Intel Corporation in the United States and other countries.
AMD Athlon and AMD Opteron are trademarks of Advanced Micro Devices, Inc.
GRACoL and IDEAlliance are registered trademarks of International Digital Enterprise Alliance.
ColorVision, ColorVision Spyder2 are registered trademarks of DataColor Holding AG.
Spyder3 is a trademark of DataColor Holding AG.
Eye-One, ColorMunki, and X-Rite are registered trademarks or trademarks of X-Rite Incorporated.
TouchWare is a trademark of 3M Touch Systems, Inc.
NextWindow is a registered trademark of NextWindow Ltd.
RealPlayer is a registered trademark of RealNetworks, Inc.
NEC is a registered trademark of NEC Corporation. PC-9801 and PC-9821 are trademarks of NEC
Corporation.
PlayStation is a registered trademark of Sony Computer Entertainment Inc.
PSP and PS3 are trademarks of Sony Computer Entertainment Inc.
ENERGY STAR is a registered trademark of the United States Environmental Protection Agency in the United
States and other countries.
HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and other countries.
EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiForce, RadiCS, RadiNET, Raptor, and
ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.
ColorNavigator, EIZO EasyPIX, EcoView NET, EIZO ScreenSlicer, i Sound, Screen Administrator, and
UniColor Pro are trademarks of EIZO NANAO CORPORATION.
All other company and product names are trademarks or registered trademarks of their respective owners.
License
A round gothic bold bit map font designed by Ricoh is used for the characters displayed on this product.
ENERGY STAR
As an ENERGY STAR Partner, EIZO NANAO CORPORATION has determined that this
product meets the ENERGY STAR guidelines for energy efciency.
50
Appendix
TCO
This product has acquired the TCO standard that relates to the safety, ergonomics, environment and so forth of
ofce equipment. For an overview of the TCO, refer to our web site.
http://www.eizo.com
FCC Declaration of Conformity
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZONANAOTECHNOLOGIESINC.
5710WarlandDrive,Cypress,CA90630
Phone:(562)431-5011
declare that the product
Tradename:EIZO
Model:FORISFS2331
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant
toPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiateradio
frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmful
interferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurin
aparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,
whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe
interferencebyoneormoreofthefollowingmeasures.
* Reorientorrelocatethereceivingantenna.
* Increasetheseparationbetweentheequipmentandreceiver.
* Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
* Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Changesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe
usersauthoritytooperatetheequipment.
Note
UsetheattachedspeciedcablebeloworEIZOsignalcablewiththismonitorsoastokeepinterference
withinthelimitsofaClassBdigitaldevice.
- ACCord
- ShieldedSignalCable(Enclosed)
Canadian Notice
ThisClassBdigitalapparatuscomplieswithCanadianICES-003.
CetappareilnumériquedeleclasseBestcomformeàlanormeNMB-003duCanada.
51
Appendix
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezi zierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1920 ×
1080, Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus
ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
Übermäßiger Schalldruck von Ohrhörern bzw. Kopfhörern kann einen Hörverlust bewirken.
Eine Einstellung des Equalizers auf Maximalwerte erhöht die Ausgangsspannung am Ohrhörer- bzw.
Kopfhörerausgang und damit auch den Schalldruckpegel.
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
[Begrenzung des maximalen Schalldruckpegels am Ohr]
Bildschirmgeräte: Größte Ausgangsspannung 150 mV
52
Appendix
LIMITED WARRANTY
LIMITED WARRANTY
EIZONANAOCORPORATION(hereinafterreferredtoasEIZO)anddistributorsauthorizedbyEIZO(hereinafter
referredtoasthe“Distributors
”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter
referredtoastheWarranty”),totheoriginalpurchaser(hereinafterreferredtoastheOriginal Purchaser
”)who
purchasedtheproductspeciedinthisdocument(hereinafterreferredtoastheProduct”)fromEIZOorDistributors,
thatEIZOandDistributorsshall,attheirsolediscretion,eitherrepairorreplacetheProductatnochargeiftheOriginal
PurchaserbecomesawarewithintheWarrantyPeriod(denedbelow)thattheProductmalfunctionsorisdamagedinthe
courseofnormaluseoftheProductinaccordancewiththedescriptionintheinstructionmanualattachedtotheProduct
(hereinafterreferredtoasthe“Users Manual”).
TheperiodofthisWarrantyislimitedto(i)five(5)yearsfromthedateofpurchaseoftheProduct;or,limitedtothe
expirationof(ii)30,000hoursofitsuseoftheProduct(hereinafterreferredtoasthe“WarrantyPeriod”);provided,
however,thattheWarrantyPeriodfortheLCDpaneloftheProductislimitedtothree(3)yearsfromthedateofpurchase
oftheProduct.EIZOandDistributorsshallbearnoliabilityorobligationwithregardtotheProductinrelationtothe
OriginalPurchaseroranythirdpartiesotherthanasprovidedunderthisWarranty.
EIZOandDistributorswillceasetoholdorstoreanypartsoftheProductuponexpirationofseven(7)yearsafterthe
productionofsuchpartsisdiscontinued.Inrepairingthemonitor,EIZOandDistributorswilluserenewalpartswhich
complywithourQCstandards.
TheWarrantyisvalidonlyinthecountriesorterritorieswheretheDistributorsarelocated.TheWarrantydoesnotrestrict
anylegalrightsoftheOriginalPurchaser.
NotwithstandinganyotherprovisionofthisWarranty,EIZOandDistributorsshallhavenoobligationunderthisWarranty
whatsoeverinanyofthecasesassetforthbelow:
(a) AnydefectoftheProductcausedbyfreightdamage,modication,alteration,abuse,misuse,accident,incorrect
installation,disaster,faultymaintenanceand/orimproperrepairbythirdpartyotherthanEIZOandDistributors;
(b) AnyincompatibilityoftheProductduetopossibletechnicalinnovationsand/orregulations;
(c) AnydeteriorationofdisplayperformancecausedbythedeteriorationofexpendablepartssuchastheLCDpanel
and/orbacklight,etc.(e.g.changesinbrightness,changesinbrightnessuniformity,changesincolor,changesin
coloruniformity,defectsinpixelsincludingburntpixels,etc.);
(d) AnydefectoftheProductcausedbyexternalequipment;
(e) AnydefectoftheProductonwhichtheoriginalserialnumberhasbeenalteredorremoved;
(f) AnydefectoftheProductcausedbyliquidleakingfrombattery;
(g) Anynormaldeteriorationoftheproduct,particularlythatofconsumables,accessories,and/orattachments(e.g.
batteries,buttons,rotatingparts,remotecontrol,cables,User’sManual,etc.);and
(h) Anydeformation,discoloration,and/orwarpoftheexterioroftheproductincludingthatofthesurfaceoftheLCD
panel.
ToobtainserviceundertheWarranty,theOriginalPurchasermustdelivertheProduct,freightprepaid,initsoriginal
packageorotheradequatepackageaffordinganequaldegreeofprotection,assumingtheriskofdamageand/orloss
intransit,tothelocalDistributor.TheOriginalPurchasermustpresentproofofpurchaseoftheProductandthedateof
suchpurchasewhenrequestingservicesundertheWarranty.
TheWarrantyPeriodforanyreplacedand/orrepairedproductunderthisWarrantyshallexpireattheendoftheoriginal
WarrantyPeriod.
EIZOORDISTRIBUTORSARENOTRESPONSIBLEFORANYDAMAGETO,ORLOSSOF,DATAOROTHER
INFORMATIONSTOREDINANYMEDIAORANYPARTOFANYPRODUCTRETURNEDTOEIZOORDISTRIBUTORS
FORREPAIR.
EIZOANDDISTRIBUTORSMAKENOFURTHERWARRANTIES,EXPRESSEDORIMPLIED,WITHRESPECTTO
THEPRODUCTANDITSQUALITY,PERFORMANCE,MERCHANTABILITYORFITNESSFORANYPARTICULAR
USE.INNOEVENTSHALLEIZOORDISTRIBUTORSBELIABLEFORANYINCIDENTAL,INDIRECT,SPECIAL,
CONSEQUENTIALOROTHERDAMAGEWHATSOEVER(INCLUDING,WITHOUTLIMITATION,DAMAGESFOR
LOSSOFPROFIT,BUSINESSINTERRUPTION,LOSSOFBUSINESSINFORMATION,ORANYOTHERPECUNIARY
LOSS)ARISINGOUTOFTHEUSEORINABILITYTOUSETHEPRODUCTORINANYCONNECTIONWITHTHE
PRODUCT,WHETHERBASEDONCONTRACT,TORT,NEGLIGENCE,STRICTLIABILITYOROTHERWISE,EVEN
IFEIZOORDISTRIBUTORSHAVEBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGES.THISEXCLUSION
ALSOINCLUDESANYLIABILITYWHICHMAYARISEOUTOFTHIRDPARTYCLAIMSAGAINSTTHEORIGINAL
PURCHASER.THE ESSENCE OFTHISPROVISIONISTOLIMITTHEPOTENTIALLIABILITY OF EIZOAND
DISTRIBUTORSARISINGOUTOFTHISLIMITEDWARRANTYAND/ORSALES.
53
Appendix
BEGRENZTE GARANTIE
EIZONANAOCORPORATION(imWeiterenalsEIZO“bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren
alsVertrieb(e)“bezeichnet)garantierendemursprünglichenKäufer(imWeiterenalsErstkäufer“bezeichnet),der
dasindiesemDokumentvorgegebeneProdukt(imWeiterenalsProdukt“bezeichnet)vonEIZOodereinemVertrieb
erworbenhat,gemäßdenBedingungendieserbeschränktenGarantie(imWeiterenalsGarantie“bezeichnet),dass
EIZOundderVertriebnacheigenemErmessendasProduktentwederkostenlosreparierenoderaustauschen,falls
derErstkäuferinnerhalbderGarantiefrist(weiteruntenfestgelegt)eineFehlfunktionbzw.BeschädigungdesProdukts
feststellt,diewährenddesnormalenGebrauchsdesProduktsgemäßdenAnweisungendeszumLieferumfangdes
ProduktsgehörendenBenutzerhandbuchs(imWeiterenals„Benutzerhandbuch“bezeichnet)aufgetretenist.
DieDauerderGarantieleistungbetgt(i)nf(5)JahreabdemErstverkaufsdatumdesProduktsoder(ii)30.000
BetriebsstundendesProdukts(imWeiterenalsGarantiefrist“bezeichnet);dieGarantiefristfürdasLCD-Paneldes
Produktsistjedochaufdrei(3)JahreabdemErstverkaufsdatumdesProduktsbeschnkt.EIZOunddieVertriebe
übernehmenüberdenRahmendieserGarantiehinaushinsichtlichdesProduktskeinerleiHaftungoderVerpichtung
demErstkäuferoderDrittengegenüber.
EIZOunddieVertriebeverpichtensich,ErsatzteilefürdasProduktübereinenZeitraumvonsieben(7)Jahrennach
EinstellungderProduktionderErsatzteilezulagernbzw.anzubieten.EIZOundseineVertriebspartnerverpichtensich,
beieineretwaigenReparaturdesMonitorsausschließlichProduktegemäßdenEIZO-Qualitätssicherungsstandardszu
verwenden.
Diese Garantie gilt nur in Ländern oder Gebieten, in denen sich Vertriebe befinden. Die gesetzlichen
GewährleistungsrechtedesErstkäufersgegenüberdemVerkäuferwerdendurchdieseGarantienichtberührt.
EIZOunddieVertriebebesitzenimRahmendieserGarantiekeinerleiVerpichtungindenfolgendenFällen:
(a) Produktdefekte, dieaufFrachtschäden,Modifikation,Nachgestaltung, Missbrauch,Fehlbedienung,Unfälle,
unsachgemäßeInstallation,Naturkatastrophen,fehlerhafteWartungund/oderunsachgemäßeReparaturdurcheine
andereParteialsEIZOunddieVertriebezurückzuführensind.
(b) EineInkompatibilitätdesProduktsaufgrundvontechnischenNeuerungenund/oderneuenBestimmungen,die
nachdemKaufinKrafttreten.
(c) JeglicheVerschlechterungderBildschirmleistung,diedurchVerschleteilewiedasLCD-Panelund/oderdie
Hintergrundbeleuchtungusw.hervorgerufenwerden(z.B.VeränderungenvonHelligkeitoderHelligkeitsverteilung,
VeränderungenvonFarbeoderFarbverteilung,PixeldefekteeinschließlichvondurchgebranntenPixelnusw.).
(d) Produktdefekte,diedurchexterneGeräteverursachtwerden.
(e) JeglicherDefekteinesProdukts,dessenursprünglicheSeriennummergeändertoderentferntwurde.
(f) Produktdefekte,diedurchAustrittvonBatterieüssigkeitverursachtwerden.
(g) NormaleAbnutzungdesProdukts,insbesonderevonVerbrauchsteilen,Zubehörteilenund/oderBeilagen(z.B.
Batterien,Tasten,drehbareTeile,Fernbedienung,Kabel,Benutzerhandbuchusw.);sowie
(h) Verformungen,Verfärbungenund/oderVerziehungenamProduktäußeren,einschließlichderOberächedesLCD-
Panels.
Bei InanspruchnahmederGarantieleistung ist derErstkäufer verpflichtet,dasProduktauf eigeneKosten und
inderOriginalverpackungbzw.einer anderen geeigneten Verpackung, die einen gleichwertigen Schutzgegen
Transportschädenbietet,andenörtlichenVertriebzuübersenden,wobeiderErstkäuferdasTransportrisikogegenüber
Schädenund/oderVerlustträgt.ZumZeitpunktderInanspruchnahmederGarantieleistungmussderErstkäufereinen
Verkaufsbelegvorweisen,aufdemdasKaufdatumangegebenist.
DieGarantiefristfüreinimRahmendieserGarantieausgetauschtesund/oderrepariertesProdukterlischtnachAblauf
derursprünglichenGarantiefrist.
EIZOODERDIEEIZO-VERTRAGSIMPORTEUREHAFTENNICHTFÜRZERSTÖRTEDATENBESTÄNDEODERDIE
KOSTENDERWIEDERBESCHAFFUNGDIESERDATENBESTÄNDEAUFJEGLICHENDATENTRÄGERNODER
TEILENDESPRODUKTS,DIEIMRAHMENDERGARANTIEBEIEIZOODERDENEIZO-VERTRAGSIMPORTEUREN
ZURREPARATUREINGEREICHTWURDEN.
EIZOUNDDIEEIZO-VERTRAGSIMPORTEURE GEBEN WEDEREXPLIZITE NOCHIMPLIZITE GARANTIEN
INBEZUGAUFDIESESPRODUKTUND SEINE QUALIT,LEISTUNG,VERKÄUFLICHKEITODEREIGNUNG
REINENBESTIMMTENZWECK.AUFKEINENFALLSINDEIZOODERDIEEIZO-VERTRAGSIMPORTEURE
VERANTWORTLICHFÜRJEGLICHEZULLIGE,INDIREKTE,SPEZIELLE,FOLGE-ODERANDERESCHÄDEN
JEGLICHERART(EINSCHLIESSLICH OHNEJEDEBEGRENZUNGSCHÄDEN BEZÜGLICHPROFITVERLUST,
GESCHÄFTSUNTERBRECHUNG,VERLUSTVONGESCHÄFTSINFORMATION ODER JEGLICHEANDEREN
FINANZIELLEN EINBUSSEN),DIEDURCHDIEVERWENDUNGDESPRODUKTESODERDIEUNFÄHIGKEIT
ZUR VERWENDUNG DES PRODUKTES ODERIN JEGLICHER BEZIEHUNG MIT DEM PRODUKT, SEI ES
BASIERENDAUFVERTRAG,SCHADENSERSATZ,NACHLAESSIGKEIT,STRIKTEHAFTPFLICHTODERANDEREN
FORDERUNGENENTSTEHEN,AUCHWENNEIZOUNDDIEEIZO-VERTRAGSIMPORTEUREIMVORAUSÜBER
DIEMÖGLICHKEITSOLCHERSCHÄDENINFORMIERTWURDEN.DIESERAUSSCHLUSSENTHÄLTAUCHJEDE
HAFTPFLICHT, DIEAUSFORDERUNGENDRITTERGEGENDENERSTUFERENTSTEHENKANN.ZWECK
DIESERKLAUSELISTES,DIEHAFTUNGVONEIZOUNDDENVERTRIEBENGEGENÜBERFORDERUNGENZU
BEGRENZEN,DIEAUSDIESERBESCHRÄNKTENGARANTIEUND/ODERDEMVERKAUFENTSTEHENKÖNNEN.
54
Appendix
GARANTIE LIMITÉE
EIZONANAOCORPORATION(ci-aprèsdénommé«EIZO
»)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés
«Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée«
Garantie
»),garantissentàl’acheteurinitial(ci-aprèsdénommé«Acheteur initial
»)duproduitspéciédanslaprésente(ci-après
dénommé«Produit »)achetéauprèsd’EIZOoudeDistributeursagréésEIZO,queEIZOetsesDistributeursauront
pouroptionderéparerouremplacergratuitementleProduitsil’Acheteurinitialconstate,pendantlaPériodedegarantie
(dénieci-dessous),qu’ilyaundysfonctionnementouqueleProduitasubiundommagedanslecadred’uneutilisation
normaleduProduitconformémentàladescriptiondumoded’emploiquiaccompagneleProduit(ci-aprèsdénommé«
Manuel d’utilisation »).
LapériodedecetteGarantieestlimitéeà(i)cinq(5)ansàpartirdeladated’achatduProduitouà(ii)30000heures
d’utilisationduProduit(ci-aprèsnome«riode de Garantie »),sousserve,toutefois,quelaPériodede
GarantiedupanneauLCDduProduitestlimieàtrois(3)ansàpartirdeladated’achatduProduit.EIZOetses
DistributeursdéclinenttouteresponsabilitéouobligationconcernantceProduitfaceàl’Acheteurinitialouàtouteautre
personneàl’exceptiondecellesstipuléesdanslaprésenteGarantie.
EIZOetsesDistributeurscesserontdetenirouconserverenstocktoutepiècedeceProduitapsl’expirationde
lariodedesept(7)anssuivantl’artdelaproductiondetellespièces.Pourréparerlemoniteur,EIZOetses
distributeursutiliserontdespiècesderechangeconformesànosnormesdecontrôlequalité.
LaGarantieestvalableuniquementdanslespaysoulesterritoiresoùsetrouventlesDistributeurs.LaGarantienelimite
aucundesdroitsreconnusparlaloiàl’Acheteurinitial.
NonobstanttouteautreclausedecetteGarantie,EIZOetsesDistributeursn’aurontd’obligationdanslecadredecette
Garantiepouraucundescasénumérésci-dessous:
(a) ToutdéfautduProduitrésultantdedommagesoccasionnéslorsdutransport,d’unemodication,d’unealtération,
d’unabus,d’unemauvaiseutilisation,d’unaccident,d’uneinstallationincorrecte,d’undésastre,d’unentretienet/
oud’uneréparationincorrectseffectuésparunepersonneautrequeEIZOousesDistributeurs;
(b) TouteincompatibilitéduProduitrésultantd’améliorationstechniqueset/ouréglementationspossibles;
(c) Toutedétériorationdesperformancesd’affichagecauséeparladétériorationdesélémentsconsommablestels
quelepanneauLCDet/oulerétroéclairage,etc.(parexempledeschangementsdeluminosité,deschangements
del’uniformitédelaluminosité,desmodicationsdecouleur,deschangementsdel’uniformitédescouleurs,des
défectuositésdepixelsycomprisdespixelsbrûlés,etc.);
(d) ToutdéfautduProduitcauséparunappareilexterne;
(e) Toutdéfautd’unProduitsurlequellenumérodesérieoriginalaétéaltéréousupprimé;
(f) ToutdéfautduProduitcauséparunécoulementduliquidecontenudanslespiles;
(g) TouteriorationnormaleduProduit,particulrementcelledesconsommables,desaccessoireset/oudes
piècesreliéesauProduit(piles,touches,élémentspivotants,télécommande,câbles,Manueld’utilisationetc.),et
(h) Touteformation,coloration,et/ou gondolagedelextérieurduProduit,ycompriscellede lasurfacedu
panneauLCD.
Pourbénécierd’unservicedanslecadredecetteGarantie,l’AcheteurinitialdoitrenvoyerleProduitportpayé,dans
sonemballaged’origineoutoutautreemballageappropriéoffrantundegrédeprotectionéquivalent,auDistributeurlocal,
etassumeralaresponsabilitédesdommageset/oupertepossibleslorsdutransport.L’Acheteurinitialdoitprésenterune
preuved’achatduProduitcomprenantsadated’achatpourbénécierdeceservicedanslecadredelaGarantie.
LaPériodedegarantiepourtoutProduitremplacéet/ouréparédanslecadredecetteGarantieexpireraàlandela
Périodedegarantieinitiale.
EIZOOUSESDISTRIBUTEURSNESAURAIENTÊTRETENUSRESPONSABLESDESDOMMAGESOUPERTESDE
DONNÉESOUD’AUTRESINFORMATIONSSTOCKÉESDANSUNMÉDIAQUELCONQUEOUUNEAUTREPARTIE
DUPRODUITRENVOYÉÀEIZOOUAUXDISTRIBUTEURSPOURRÉPARATION.
AUCUNEAUTRE GARANTIE,EXPLICITEOUTACITE, NESTOFFERTEPAREIZOET SES DISTRIBUTEURS
CONCERNANTLEPRODUITETSESQUALITÉS,PERFORMANCES,QUALIMARCHANDEOUADAPTATION
ÀUNUSAGEPARTICULIER.ENAUCUNCAS,EIZOOUSESDISTRIBUTEURSNESERONTRESPONSABLES
DES DOMMAGESFORTUITS,INDIRECTS, SPÉCIAUX,INDUITS, OU DETOUTAUTRE DOMMAGE QUEL
QU’ILSOIT(YCOMPRIS,SANSLIMITATION,LESDOMMAGESSULTANTD’UNEPERTEDEPROFIT,D’UNE
INTERRUPTIOND’ACTIVIS,D’UNEPERTEDEDONESCOMMERCIALES,OUDETOUTAUTREMANQUE
ÀGAGNER)RÉSULTANT DEL’UTILISATION OUDEL’INCAPACITÉDUTILISERLEPRODUITOUAYANT UN
RAPPORTQUELCONQUEAVECLEPRODUIT,QUECESOITSURLABASED’UNCONTRAT,D’UNTORT,D’UNE
NÉGLIGENCE,D’UNERESPONSABILITÉSTRICTEOUAUTRE,MÊMESIEIZOOUSESDISTRIBUTEURSONTÉTÉ
AVERTISDELAPOSSIBILITÉDETELSDOMMAGES.CETTELIMITATIONINCLUTAUSSITOUTERESPONSABILITÉ
QUI POURRAITÊTRESOULEVÉELORSDESRÉCLAMATIONSD’UNTIERSCONTRELACHETEURINITIAL.
LESSENCEDECETTECLAUSEESTDELIMITERLARESPONSABILITÉPOTENTIELLEDEEIZOETDESES
DISTRIBUTEURSRÉSULTANTDECETTEGARANTIELIMITÉEET/OUDESVENTES.
55
Appendix
GARANTÍA LIMITADA
EIZO NANAO CORPORATION (en lo sucesivo EIZO) y sus distribuidoresautorizados(enlo sucesivo los
Distribuidores”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivolaGarantía
”),
garantizanalcompradororiginal(enlosucesivoelComprador original
”)quecompróelproductoespecicadoeneste
documento(enlosucesivoelProducto”)aEIZOoasusDistribuidores,queEIZOysusDistribuidores,asupropio
criterio,repararánosustituiránelProductodeformagratuitasielCompradororiginaldetectadentrodelperiododela
Garantía(indicadoposteriormente)queelProductonofuncionacorrectamenteoquesehaaveriadoduranteeluso
normaldelmismodeacuerdoconlasindicacionesdelmanualdeinstruccionessuministradoconelProducto(enlo
sucesivoel“Manual del usuario”).
ElperíododevalidezdeestaGarantíaestálimitadoa(i)cinco(5)añosapartirdelafechadecompradelProductoo
(ii)a30.000horasdeusodelProducto(enadelantedesignadocomoelPeriodo de Garantía”);conlaexclusión,no
obstante,dequeelperíododegarantíadelpanelLCDdelProductoestálimitadoatres(3)añosapartirdelafecha
decompradelProducto.EIZOysusDistribuidoresnotendránningunaresponsabilidadniobligaciónconrespectoal
ProductoparaconelCompradororiginalnicontercerosquenoseanlasestipuladasenlapresenteGarantía.
EIZOysusDistribuidoresnoestaránobligadosasuministrarcualquierrecambiodelProductounavezpasadossiete
(7)añosdesdequesedejedefabricarelmismo.Paralareparacióndelmonitor,EIZOylosdistribuidoresutilizarán
repuestosquecumplanconnuestrosestándaresdecontroldecalidad.
LaGarantíaesválidasóloenlospaísesyterritoriosdondeestánubicadoslosDistribuidores.LaGarantíanorestringe
ningúnderecholegaldelCompradororiginal.
ApesardelasestipulacionesdeestaGarantía,EIZOysusDistribuidoresnotendránobligacnalgunabajoesta
Garantíaenningunodeloscasosexpuestosacontinuación:
(a) CualquierdefectodelProductocausadopordañoseneltransporte,modicación,alteración,abuso,usoincorrecto,
accidente,instalacnincorrecta,desastre,mantenimientoincorrectoy/oreparaciónindebidarealizadaporun
terceroquenoseaEIZOosusDistribuidores.
(b) CualquierincompatibilidaddelProductodebidaaposiblesinnovacionestécnicasy/oreglamentaciones.
(c) Cualquierdeterioroenelrendimientodelavisualizacióncausadoporfallosenlaspiezasconsumiblescomoel
panelLCDy/ola"Backlight",etc.(p.ej.cambiosdebrillo,cambiosdeuniformidaddelbrillo,cambiosdecolor,
cambiosdeuniformidaddelcolor,defectosdepíxeles,incluyendopíxelesmuertos,etc.).
(d) CualquierdefectodelProductocausadoporunequipoexterno.
(e) CualquierdefectodelProductoenelquehayasidoalteradooborradoelnúmerodeserieoriginal.
(f) CualquierdefectodelProductocasusadoporfugasdelíquidodelaspilas.
(g) CualquierdeterioronormaldelProducto,yenparticulardelaspiezasconsumibles,accesoriosydemás(p.ej.
pilas,botones,piezasgiratorias,mandoadistancia,cables,Manualdelusuario,etc.).
(h) Cualquierdeformación,decoloracióny/oalabeodelexteriordelProductoincluidalasuperciedelpanelLCD.
ParaobtenerservicioenlostérminosdeestaGarana,elProductodeberáserenviadoporelCompradororiginal,
asuDistribuidorlocal,coneltransportepreviamentepagado,enelembalajeoriginaluotroembalajeadecuadoque
ofrezcaelmismogradodeprotección,asumiendoelriesgodedañosy/opérdidadelProductoduranteeltransporte.El
CompradororiginaldeberápresentaruncomprobantedecompradelProductoenelquesereejelafechadecompra
delmismocuandolosoliciteelserviciodeGarantía.
ElPeriododegarantíaparacualquierProductoreemplazadoy/oreparadoenlostérminosdeestaGarantíaexpiraráal
vencerelPeriododegarantíaoriginal.
EIZO OLOS DISTRIBUIDORESAUTORIZADOSDE EIZO NOSE RESPONSABILIZAN DENINGÚN DAÑO O
PÉRDIDAQUEPUEDANSUFRIRLOSDATOSUOTRAINFORMACIÓNALMACENADAENCUALQUIERMEDIOO
CUALQUIERPARTEDECUALQUIERPRODUCTODEVUELTOAEIZOOALOSDISTRIBUIDORESDEEIZOPARA
SUREPARACIÓN.
EIZOYLOSDISTRIBUIDORESAUTORIZADOSDEEIZONOOFRECENNINGUNAOTRAGARANTÍA,IMPLÍCITA
NIEXPLÍCITA, CON RESPECTOAL PRODUCTO YA SU CALIDAD,RENDIMIENTO, COMERCIABILIDADE
IDONEIDADPARACUALQUIERUSOENPARTICULAR.ENNINGÚNCASOSERÁNEIZOOLOSDISTRIBUIDORES
AUTORIZADOSDEEIZORESPONSABLESDENINGÚNDAÑOEMERGENTE,INDIRECTO,ESPECIAL,INHERENTE
OCUALQUIERAQUESEA(INCLUYENDO,SINLIMITACN,DAÑOSPORLUCROCESANTE,INTERRUPCN
DELAACTIVIDAD COMERCIAL, PÉRDIDADEINFORMACIÓNCOMERCIAL OCUALQUIER OTRA PÉRDIDA
PECUNIARIA)QUESEDERIVEDELUSOOIMPOSIBILIDADDEUSODELPRODUCTOOENRELACIÓNCONEL
PRODUCTO,YASEABASADOENCONTRATO,PORAGRAVIO,NEGLIGENCIA,ESTRICTARESPONSABILIDAD
OCUALQUIERAQUESEA,AUNCUANDOSEHAYAADVERTIDOAEIZOOALOSDISTRIBUIDORESDEEIZO
DELAPOSIBILIDADDETALESDAÑOS.ESTAEXCLUSIÓNTAMBIÉNABARCACUALQUIERRESPONSABILIDAD
QUEPUEDADERIVARSE DE RECLAMACIONES HECHASPOR UNTERCEROCONTRAELCOMPRADOR
ORIGINAL.LAESENCIADEESTAESTIPULACIÓNESLIMITARLARESPONSABILIDADPOTENCIALDEEIZOYLOS
DISTRIBUIDORESQUEPUDIERADERIVARSEDEESTAGARANTÍALIMITADAY/OVENTAS.
56
Appendix
GARANZIA LIMITATA
EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoiconEIZO”)ediDistributoriautorizzatidaEIZO(a
cuisifaràriferimentodaquiinpoiconDistributori
”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi
faràriferimentodaquiinpoicon“Garanzia”)all’acquirenteoriginale(acuisifaràriferimentodaquiinpoicon“
Acquirente
originale”)chehaacquistatoilprodottospecificatoinquestodocumento(acuisifaràriferimentodaquiinpoicon
Prodotto”)daEIZOodaisuoiDistributori,cheEIZOeidistributori,alorodiscrezione,riparerannoosostituirannoil
Prodottosenzaaddebitosel’Acquirenteoriginaletrova,entroilperiododellaGaranzia(denitosotto),cheilProdotto
malfunzionaesièdanneggiatonelcorsodelsuonormaleutilizzoosservandoleindicazionidelmanualediistruzioni
allegatoalProdotto(acuisifaràriferimentodaquiinpoicon“Manuale utente”).
LapresenteGaranziaèlimitatoa(i)cinque(5)anniapartiredalladatad'acquistodelProdotto;o,limitato(ii)allo
scaderedi30.000ored'utilizzodelProdotto(acuisifaràriferimentodaquiinpoiconPeriodo di Garanzia
”);tenendo
peròpresentecheilPeriododigaranziadelpannelloLCDdelProdottoèlimitatoatre(3)annidalladatad'acquisto
delProdotto.EIZOeisuoiDistributorinonsiassumonoalcunaresponsabilitàenonhannoalcunobbligoriguardoal
Prodottoversol’AcquirenteoriginaleoterzidiversidaquellirelativiaquestaGaranzia.
EIZOeisuoiDistributoricesserannoditenereodiconservarequalsiasiricambiodelProdottoalloscaderedisette
(7)annidopochelaproduzioneditaliricambièstataterminata.Perlariparazionedelmonitor,EIZOeiDistributori
utilizzerannopartidiricambioconformiainostristandarddicontrollodellaqualità.
LaGaranziaèvalidasoltantoneipaesidovecisonoiDistributoriEIZO.LaGaranzianonlimitaalcundirittolegale
dell’Acquirenteoriginale.
IndipendentementedaqualsiasialtracondizionediquestaGaranzia,EIZOeisuoiDistributorinonavrannoalcunobbligo
derivantedaquestaGaranziainognunodeicasielencatidiseguito:
(a) QualsiasidifettodelProdottocausatodadanniditrasporto,modiche,alterazioni,abusi,usiimpropri,incidenti,
installazioneerrata,calamità,manutenzioneerratae/oriparazioniimproprieeseguitedaterzepartichenonsiano
EIZOoisuoiDistributori.
(b) QualsiasiincompatibilitàdelProdottodovutaapossibiliinnovazionitecnichee/onormative.
(c) Qualsiasideterioramentodelleprestazionidelloschermocausatodaldeterioramentodelleparticonsumabili,come
ilpannelloLCDe/olaretroilluminazione,ecc.(peresempio:icambiamentidiluminosità,cambiamentidiuniformità
dellaluminosità,icambiamentidicolore,icambiamentidiuniformitàdelcolore,idifettideipixel,inclusiipixel
bruciati,ecc.).
(d) QualsiasidifettodelProdottocausatodaapparecchiatureesterne.
(e) QualsiasidifettodelProdottoincuiilnumerodiserieoriginalesiastatoalteratoorimosso.
(f) QualsiasidifettodelProdottocausatodallafuoriuscitadiliquidodallepile.
(g) QualsiasinormaledeterioramentodelProdotto,inparticolarmodonellesuepartidiconsumo,accessori,e/o
attacchi(peresempio:pile,tasti,partirotanti,telecomando,cavi,Manualedell’utente,ecc.).
(h) Qualsiasitipodideformazione,scolorimento,e/odiinvolucroesternodelProdottoinclusalasuperciedelpannello
LCD.
PerricevereassistenzatecnicaconquestaGaranzia,l’AcquirenteoriginaledeveinviareilProdotto,contrasporto
pre-pagato,nellasuaconfezioneoriginaleoaltraconfezioneadeguatachefornisceunlivelloanalogodiprotezione,
assumendosiilrischiodidannie/operditaintransito,alDistributorelocale.LAcquirenteoriginaledevepresentarela
provadiacquistochestabilisceladatadiacquistodelProdottoquandorichiedeserviziosottoGaranzia.
IlPeriododigaranziaperqualsiasiProdottosostituitoe/oriparatosottoquestaGaranziascadeallanedelPeriododi
garanziaoriginale.
EIZOOISUOIDISTRIBUTORINONSONORESPONSABILIPERQUALSIASIDANNOOPERDITADIDATIOALTRE
INFORMAZIONIMEMORIZZATISUQUALSIASISUPPORTOOQUALSIASIPARTEDIQUALSIASIPRODOTTO
INVIATOAEIZOOISUOIDISTRIBUTORIPERRIPARAZIONI.
EIZOEI SUOIDISTRIBUTORINON OFFRONOALCUNAGARANZIAADDIZIONALE,IMPLICITAOESPLICITA,
RIGUARDOIL PRODOTTO E LA SUA QUALITÀ,PRESTAZIONI, VENDIBILITÀOAPPROPRIATEZZA PER
QUALSIASIUSO PARTICOLARE.INNESSUNCASOEIZOOI DISTRIBUTORIEIZOAUTORIZZATI SARANNO
RESPONSABILIPER QUALSIASIDANNOACCIDENTALE, INDIRETTO, SPECIALE, CONSEGUENTEO DI
QUALSIASIALTRANATURA(INCLUSI,SENZALIMITI,DANNIPERPERDITADIPROFITTI,INTERRUZIONEDELLE
ATTIVITÀ, PERDITADI INFORMAZIONIDAFFARI OQUALSIASIALTRAPERDITAPECUNIARIA)DERIVANTI
DALL’USO O DALL’IMPOSSIBILI DI USAREIL PRODOTTOOIN QUALSIASI RELAZIONEALPRODOTTO,
SIASU BASE DI CONTRATTO,TORTO,NEGLIGENZA,STRETTARESPONSABILITÀOALTRIMENTI,ANCHE
SEEIZOOIDISTRIBUTORIEIZOAUTORIZZATISONOSTATIAVVERTITIDELLAPOSSIBILITÀDITALIDANNI.
QUESTAESCLUSIONEINCLUDEANCHEQUALSIASIRESPONSABILITÀCHEPOSSAINSORGEREDARECLAMI
DITERZICONTRO L’ACQUIRENTEORIGINALE. L’ESSENZADI QUESTO PROVVEDIMENTOÈLIMITARELA
RESPONSABILITÀPOTENZIALEDIEIZOEDEIDISTRIBUTORIDERIVANTEDAQUESTAGARANZIALIMITATAE/O
DALLEVENDITE.
57
Appendix
BEGRÄNSAD GARANTI
EIZO NANAO CORPORATION (nedan kallat EIZO) och EIZOs auktoriseradedistributörer (nedankallade
Distriburer) garanterar ienlighetmedvillkoren idennabegränsadegaranti(nedan kallad Garantin”)den
ursprungligeköparen(nedankalladdenUrsprunglige köparen
”)somköptedenidokumentetspeciceradeprodukten
(nedankalladProdukten
”)frånEIZOellerDistributörer,attEIZOellerDistributörerenligtegetgottnnandekostnadsfritt
antingenrepareraellerbytautdendefektaProduktenomdenUrsprungligeköpareninomGarantiperioden(denieras
nedan)upptäckerattProduktenfungerarfelaktigtellerskadasundernormalanvändningavProduktenienlighetmed
beskrivningenibruksanvisningen(nedankallad“Bruksanvisning”).
Giltighetsperiodenfördennagarantiärbegränsadtill(i)fem(5)årfråndatumetförProduktensinköpeller,omdetta
inträffartidigare,begränsattillutlöpandetav(ii)30000timmarsanvändningavProdukten(härikallad“Garantiperioden
”).
GarantiperiodenförProduktensLCD-panelärdockbegränsadtilltre(3)årfråndatumetförProduktensinköp.EIZOoch
DistributörerskainteundernågravillkorhanågotannatansvaränvadsomangesidennagarantigällandeProdukteni
relationtilldenUrsprungligeköparenellertredjepart.
EIZOochDistributörerkommerattupphöramedlagerhållningavProduktensdelareftersju(7)årefterattproduktionen
av dessadelar upphört.tskärmenreparerasanvänderEIZO ochdistributörerreservdelarsom uppfyllerra
kvalitetsstandarder.
GarantinärendastgiltigideländerrdetfinnsDistributörer.GarantinbegränsarintenågraavdenUrsprunglige
köparenslagstadgaderättigheter.
OavsettandravillkoridennagarantiskainteEIZODistributörerundernågravillkorhanågotansvarinågotavdefall
sombeskrivsnedan:
(a) rgonbristfällighethosProduktenkanhärledastillatthauppståttvidfrakt,modifiering,ändring,felaktigt
handhavande,olycka,felaktiginstallation,katastrof,felaktigtunderhålloch/ellerfelaktigreparationutfördavtredje
partannanänEIZOochDistributörer.
(b) AllaformeravinkompatibilitethosProduktenpågrundavmöjligatekniskainnovationeroch/ellerbestämmelser.
(c) Alla försämringar av bildens prestanda beroende på förbrukningsdelar så som LCD-panel och/eller
bakgrundsbelysningetc.(t.ex.ändringariljusstyrka,jämnhetiljusstyrka,färg,färgjämnhet,defektapixlaroch/eller
fastlysandepixlaretc.).
(d) AlladefekterhosProduktensomorsakatsavexternutrustning.
(e) AlladefekterhosProduktenpåvilkendetursprungligaserienumretharändratselleravlägsnats.
(f) Allaproduktfelsomorsakasavvätskasomläckerfrånbatteriet.
(g) AllnormalrsämringavProdukten,specielltrbrukningsartiklar,tillbehöroch/elleryttredelar(t.ex.batterier,
knappar,roterandedelar,fjärrkontroll,kablar,Bruksanvisningenetc.).
(h) Varjedeformation,missfärgningoch/ellerskevhetavProduktensyttreinklusiveytanpåLCD-panelen.
ratterllaserviceunderdennagarantimåstedenUrsprungligeköparen(medhänseendetillriskenförskada
och/ellerförlustundertransport)levereraProduktentillnärmasteDistributörmedförebetaldfrakt,idessursprungliga
rpackningellerannanfullgodrpackningsomgerlikvärdigtskydd.DenUrsprungligeparenmåstekunnavisa
inköpsbevisförProduktensomklargörProduktensinköpsdatumvidbegäranavgarantiservice.
Garantiperiodenförallautbyttaoch/ellerrepareradeprodukterunderdennagarantiskallupphöravidutgångenavden
ursprungligaGarantiperioden.
EIZOELLERDISTRIBUTÖRERÄRINTEANSVARIGAFÖRNÅGONFORMAVSKADAELLERFÖRLUSTAVDATA
ELLERANNANINFORMATIONSOMHARLAGRATSINÅGONFORMAVMEDIAELLERANNANDELAVNÅGON
PRODUKTSOMHARRETURNERATSTILLEIZOELLERDISTRIBUTÖRERFÖRREPARATION.
EIZO OCH DISTRIBUTÖRERNA GARANTERAR INGET, UTTRYCKLIGEN ELLER UNDERFÖRSTÅTT, VAD
BETRÄFFARPRODUKTENOCHDESSKVALITET,PRESTANDA,SÄLJBARHETELLERLÄMPLIGHETFÖRNÅGON
FORMAVSPECIELLANVÄNDNING.UNDERINGAOMSTÄNDIGHETERSKALLEIZOELLERDISTRIBUTÖRERNA
HÅLLASANSVARIGAFÖRNÅGRASOMHELSTUNDERORDNADE,INDIREKTA,SPECIELLA,DÄRAVFÖLJANDE
ELLERÖVRIGASKADOR(INKLUSIVE,UTAN BEGRÄNSNINGTILL,SKADORFÖRFÖRLUSTAV INKOMST,
AVBRUTENAFFÄRSRÖRELSE,RLUSTAVAFFÄRSINFORMATIONELLERANNANSÄRSKILDFÖRLUST)SOM
UPPSTÅTTSOMETTRESULTATAVANNDNINGELLERORMÅGAATTANVÄNDAPRODUKTENELLERI
NÅGONFORMAVANSLUTNINGTILLPRODUKTERNA,VARESIGDETTAGRUNDASPÅKONTRAKT,ÅTALBAR
HANDLING,FÖRSUMLIGHET,ANSVARSSKYLDIGHETELLERANNAT,ÄVENOMEIZOELLERDISTRIBUTÖRERNA
HAR INFORMERATSBETRÄFFANDEMÖJLIGHETATTSÅDANASKADORFÖRELIGGER.DETTAUNDANTAG
OMFATTARÄVENALLFORMAVANSVARSSKYLDIGHETSOMKANUPPSTÅGENOMENTREDJEPARTSANSPRÅK
GENTEMOTDENURSPRUNGLIGEKÖPAREN.GRUNDBESTÅNDSDELENIBESTÄMMELSENÄRATTBEGRÄNSA
DETEVENTUELLAANSVARSTAGANDETFÖREIZOOCHDISTRIBUTÖRERNASOMKANUPPSTÅGENOMDENNA
BEGRÄNSADEGARANTIOCH/ELLERFÖRSÄLJNING.
58
Appendix
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ
ΗEIZONANAOCORPORATION(στοεξής«EIZO»)καιοιδιανομείςπουεξουσιοδοτείηEIZO(στοεξής«Διανομείς»)
παρέχουν εγγύηση,υποκείμενηκαι σύμφωνα μετους όρους της παρούσαςπεριορισμένηςεγγύησης(στο εξής
«Εγγύηση»),στοναρχικόαγοραστή(στοεξής«Αρχικός Αγοραστής
»)οοποίοςαγόρασετοπροϊόνπουκαθορίζεταιστο
παρόνέγγραφο(στοεξής«Προϊόν»)απότηνEIZOήτουςΔιανομείς,ηοποίαεξασφαλίζειότιηEIZOκαιοιΔιανομείς,
σύμφωναμετηδιακριτήευχέρειάτους,είτεθαεπισκευάσουνείτεθααντικαταστήσουντοΠροϊόνχωρίςχρέωσηεάνο
ΑρχικόςΑγοραστήςαντιληφθείεντόςτηςΠεριόδουΕγγύησης(ορίζεταικατωτέρω)ότιτοΠροϊόνδυσλειτουργείήέχει
υποστείβλάβηκατάτηδιάρκειακανονικήςχρήσηςτουΠροϊόντοςσύμφωναμετηνπεριγραφήστοεγχειρίδιοχρήσηςπου
συνοδεύειτοΠροϊόν(στοεξής«Εγχειρίδιο Χρήστη»).
ΗπερίοδοςτηςπαρούσαςΕγγύησηςείναι(i)πέντε(5)έτηαπότηνημερομηνίααγοράςτουΠροϊόντος,ή,στηλήξητων
(ii)30.000ωρώνχρήσηςτουΠροϊόντος(στοεξής«Περίοδος Εγγύησης
»),μετηνπροϋπόθεση,ωστόσο,ότιηΠερίοδος
ΕγγύησηςγιατηνοθόνηLCDτουΠροϊόντοςπεριορίζεταισετρία(3)έτηαπότηνημερομηνίααγοράςτουΠροϊόντος.Η
EIZOκαιοιΔιανομείςδενφέρουνκαμίαευθύνηήυποχρέωσηόσοναφοράτοΠροϊόνσεσχέσημετονΑρχικόΑγοραστή
ήοποιοδήποτετρίτομέρος,ούτεάλληευθύνηδιαφορετικήαπόαυτήνπουπαρέχεταιστηνπαρούσαΕγγύηση.
ΗEIZOκαιοιΔιανομείςθαπαύσουνναδιατηρούνήνααποθηκεύουντυχόνεξαρτήματατουΠροϊόντοςκατόπιντηςλήξης
τωνεπτά(7)ετώνμετάτηδιακοπήτηςπαραγωγήςτέτοιωνεξαρτημάτων.Κατάτηνεπισκευήτηςοθόνης,ηEIZOκαιοι
ΔιανομείςθαχρησιμοποιήσουνανταλλακτικάεπισκευήςπουσυμμορφώνονταιμεταπρότυπάμαςγιατηΔιασφάλιση
Ποιότητας.
ΗΕγγύησηισχύειμόνοσεχώρεςήπεριοχέςόπουβρίσκονταιοιΔιανομείς.ΗΕγγύησηδενπεριορίζειοποιαδήποτε
νόμιμαδικαιώματατουΑρχικούΑγοραστή.
ΛαμβανομένηςυπόψηκάθεδιάταξηςτηςπαρούσαςΕγγύησης,ηEIZOκαιοιΔιανομείςδενθαέχουνκαμίααπολύτως
υποχρέωσησύμφωναμετηνπαρούσαΕγγύησησεοποιαδήποτεαπότιςπεριπτώσειςπουδιατυπώνονταικατωτέρω:
(α) ΤυχόνελάττωματουΠροϊόντοςπουπροκαλείταιαπόζημιάκατάτημεταφορά,τροποποίηση,αλλαγή,κατάχρηση,
λανθασμένηχρήση,ατύχημα,λανθασμένηεγκατάσταση,καταστροφή,εσφαλμένησυντήρησηή/καιλανθασμένη
επισκευήαπότρίτομέροςεκτόςτηςEIZOκαιτωνΔιανομέων,
(β) ΤυχόνασυμβατότητατουΠροϊόντοςλόγωπιθανώντεχνικώνκαινοτομιώνή/καικανονισμών,
(γ) Τυχόνεπιδείνωση της απόδοσηςοθόνης που προκαλείταιαπό τη φθοράαναλώσιμων εξαρτημάτων όπως
τηςοθόνηςLCDή/καιτουφωτόςυποβάθρου,κτλ.(π.χ.αλλαγέςστηφωτεινότητα,αλλαγέςστηνομοιομορφία
φωτεινότητας,αλλαγέςστοχρώμα,αλλαγέςστηνομοιομορφίαχρώματος,ελαττώματασεpixelπεριλαμβανομένων
τωνκαμένωνpixel,κτλ.),
(δ) ΤυχόνελάττωματουΠροϊόντοςπουπροκαλείταιαπόεξωτερικόεξοπλισμό,
(ε) ΤυχόνελάττωματουΠροϊόντοςστοοποίοέχειτροποποιηθείήαφαιρεθείογνήσιοςαριθμόςσειράς,
(στ)ΤυχόνελάττωματουΠροϊόντοςπουπροκαλείταιαπόδιαρροήυγρούαπότηνμπαταρία,
(ζ) Τυχόν φυσιολογική φθορά του προϊόντος, ιδιαίτερα αυτής των αναλώσιµων, των αξεσουάρ ή/και των
προσαρτηµάτων(π.χ.μπαταρίες,κουµπιά,περιστρεφόµεναµέρη,τηλεχειριστήριο,καλώδια,ΕγχειρίδιοΧρήστη,
κτλ.),και
(η) Τυχόν παραμόρφωση, αποχρωματισμό ή/και διαστρέβλωση του εξωτερικού μέρους του προϊόντος,
περιλαμβανομένηςτηςεπιφάνειαςτηςοθόνηςLCD.
ΟΑρχικόςΑγοραστήςγιαναδικαιούταιυπηρεσίεςεπισκευήςσύμφωναμετηνΕγγύηση,θαπρέπειναπαραδώσειτο
Προϊόν,μεπληρωμέναταμεταφορικάέξοδα,στηναρχικήτουσυσκευασίαήσεάλληεπαρκήσυσκευασίαμεισότιμο
βαθμόπροστασίας,αναλαμβάνονταςτονκίνδυνοβλάβηςή/καιαπώλειαςκατάτημεταφορά,στοντοπικόΔιανομέα.Ο
ΑρχικόςΑγοραστήςότανζητάυπηρεσίεςεπισκευήςσύμφωναμετηνΕγγύηση,θαπρέπειναπροσκομίζειτηναπόδειξη
αγοράςτουΠροϊόντοςκαιτηνημερομηνίατηςαγοράς.
ΗΠερίοδος Εγγύησης γιαοποιοδήποτεαντικατεστημένο ή/και επισκευασμένοπροϊόνσύμφωναμετηνπαρούσα
ΕγγύησηλήγειστοτέλοςτηςαρχικήςΠεριόδουΕγγύησης.
ΗEIZOΉΟΙΔΙΑΝΟΜΕΙΣΔΕΝΕΥΘΥΝΟΝΤΑΙΓΙΑΟΠΟΙΑΔΗΠΟΤΕΒΛΑΒΗΉΑΠΩΛΕΙΑΔΕΔΟΜΕΝΩΝΉΑΛΛΩΝ
ΠΛΗΡΟΦΟΡΙΩΝ ΠΟΥΑΠΟΘΗΚΕΥΟΝΤΑΙ ΣΕΟΠΟΙΟΔΗΠΟΤΕ ΜΕΣΟΉ ΟΠΟΙΟΔΗΠΟΤΕΑΛΛΟ ΜΕΡΟΣΣΕ
ΟΠΟΙΟΔΗΠΟΤΕΠΡΟΪΟΝΠΟΥΕΠΙΣΤΡΕΦΕΤΑΙΣΤΗΝEIZOΉΣΕΔΙΑΝΟΜΕΑΓΙΑΕΠΙΣΚΕΥΗ.
ΗEIZOΚΑΙΟΙΔΙΑΝΟΜΕΙΣΔΕΝΠΑΡΕΧΟΥΝΚΑΜΙΑΠΕΡΑΙΤΕΡΩΕΓΓΥΗΣΗ,ΡΗΤΗΉΣΥΝΕΠΑΓΟΜΕΝΗ,ΟΣΟΝ
ΑΦΟΡΑΤΟΠΡΟΪΟΝΚΑΙΤΗΝΠΟΙΟΤΗΤΑ,ΤΗΝΑΠΟΔΟΣΗ,ΤΗΝΕΜΠΟΡΕΥΣΙΜΟΤΗΤΑΉΤΗΝΚΑΤΑΛΛΗΛΟΤΗΤΑ
ΤΟΥ ΓΙΑΟΠΟΙΑΔΗΠΟΤΕ ΣΥΓΚΕΚΡΙΜΕΝΗ ΧΡΗΣΗ. ΣΕ ΚΑΜΙΑ ΠΕΡΙΠΤΩΣΗΗEIZOΉ ΟΙΔΙΑΝΟΜΕΙΣΔΕΝ
ΘΑ ΕΥΘΥΝΟΝΤΑΙ ΓΙΑ ΚΑΜΙΑΑΠΟΛΥΤΩΣΤΥΧΑΙΑ, ΕΜΜΕΣΗ, ΕΙΔΙΚΗ, ΣΥΝΕΠΑΓΟΜΕΝΗ ΉΑΛΛΗ ΒΛΑΒΗ
(ΠΕΡΙΛΑΜΒΑΝΟΜΕΝΩΝ, ΜΕΤΑΞΥΑΛΛΩΝ, ΒΛΑΒΩΝ ΉΑΠΩΛΕΙΑΣΚΕΡΔΩΝ,ΔΙΑΚΟΠΗΣ ΕΠΙΧΕΙΡΗΜΑΤΙΚΩΝ
ΔΡΑΣΤΗΡΙΟΤΗΤΩΝ,ΑΠΩΛΕΙΑΣΕΠΙΧΕΙΡΗΜΑΤΙΚΩΝΠΛΗΡΟΦΟΡΙΩΝΉΤΥΧΟΝΑΛΛΗΣΧΡΗΜΑΤΙΚΗΣΑΠΩΛΕΙΑΣ)
ΠΟΥΠΡΟΚΥΠΤΕΙΑΠΟΤΗΧΡΗΣΗΉΤΗΝΑΝΙΚΑΝΟΤΗΤΑΧΡΗΣΗΣΤΟΥΠΡΟΪΟΝΤΟΣΉΤΥΧΟΝΑΛΛΗΣΣΥΝΔΕΣΗΣ
ΜΕΤΟΠΡΟΪΟΝ,ΕΙΤΕΒΑΣΙΖΕΤΑΙΣΕΣΥΜΒΟΛΑΙΟ,ΒΛΑΒΗ,ΑΜΕΛΕΙΑ,ΑΥΣΤΗΡΗΕΥΘΥΝΗΉΕΙΔΑΛΛΩΣ,ΑΚΟΜΗ
ΚΙΕΑΝΗEIZOΉΟΙΔΙΑΝΟΜΕΙΣΕΝΗΜΕΡΩΘΟΥΝΓΙΑΤΗΝΠΙΘΑΝΟΤΗΤΑΤΕΤΟΙΩΝΖΗΜΙΩΝ.ΗΕΞΑΙΡΕΣΗΑΥΤΗ
ΠΕΡΙΛΑΜΒΑΝΕΙΕΠΙΣΗΣΟΠΟΙΑΔΗΠΟΤΕΕΥΘΥΝΗΕΝΔΕΧΕΤΑΙΝΑΠΡΟΚΥΨΕΙΑΠΟΑΞΙΩΣΕΙΣΤΡΙΤΟΥΜΕΡΟΥΣ
ΚΑΤΑΤΟΥΑΡΧΙΚΟΥΑΓΟΡΑΣΤΗ.ΗΟΥΣΙΑΤΟΥΟΡΟΥΑΥΤΟΥΕΙΝΑΙΝΑΠΕΡΙΟΡΙΣΕΙΤΗΝΠΙΘΑΝΗΕΥΘΥΝΗΤΗΣ
EIZOΚΑΙΤΩΝΔΙΑΝΟΜΕΩΝΠΟΥΠΡΟΚΥΠΤΕΙΑΠΟΤΗΝΠΑΡΟΥΣΑΕΓΓΥΗΣΗΉ/ΚΑΙΤΙΣΠΩΛΗΣΕΙΣ.
59
Appendix
ОГРАНИЧЕННАЯ ГАРАНТИЯ
EIZONANAO CORPORATION (называемая вдальнейшемEIZO)иавторизированныеEIZOдистрибуторы
(называемые вдальнейшем Дистрибуторы) гарантируют, в соответствии сусловиямиипунктами этой
ограниченнойгарантии(называемойвдальнейшемГарантия),первичномупокупателю (называемомув
дальнейшемПервоначальный покупатель
”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный
вэтомдокументеазываемыйвдальнейшемПродукт),чтоEIZOилиДистрибуторынасвоеусмотрение
либобесплатноотремонтируют,либобесплатнозаменятПродукт,еслиПервоначальныйпокупательпризнает
впределахГарантийногосрокапределенногониже),чтоПродуктнеисправенилионповрежденпроцессе
нормальногоиспользованияпродуктавсоответствиисописаниемвинструкциипоэксплуатации,прилагаемойк
Продукту(называемойвдальнейшем“Руководство пользователя”).
Гарантийныйпериодограниченсроком(i)пять(5)летотдатыприобретенияПродукта,илиограниченсроком(ii)
30000часовиспользованияПродукта(называемыйвдальнейшемГарантийный период),приусловии,что
ГарантийныйпериоддляпанелиЖКДограниченсрокомтри(3)годаотдатыприобретенияПродукта.EIZOи
ДистрибуторыненесутникакойответственностиинеберутобязательствотносительноПродуктапоотношениюк
Первоначальномупокупателюилипоотношениюклюбымтретьимсторонам,кромеобязательств,оговоренныхв
этойГарантии.
EIZOиДистрибуторыпрекратятхранениеилискладированиелюбыхдеталейПродуктапоистечениисеми(7)
летпослепрекращенияпроизводстватакихдеталей.ВслучаеремонтамонитораEIZOиДистрибьюторыбудут
использоватьзапчасти,которыесоответствуютнашимстандартамQC(контролькачества).
Гарантия действительна только в странах или регионах, где расположены Дистрибуторы. Гарантия не
ограничиваетникакиезаконныеправаПервоначальногопокупателя.
НесмотрянадругиеусловияэтойГарантииEIZOиДистрибуторыненесутникакихобязательствсогласноэтой
Гарантиивлюбомизперечисленныхнижеслучаев:
(а) Любые дефекты Продукта,вызванные повреждениямиприперевозке,модификацией,изменением,
неправильнымобращением, неправильнымиспользованием,авариями,неправильнойустановкой,
стихийнымибедствиями,неправильнымуходоми/илинеправильнымремонтомтретьейстороной,отличной
отEIZOилиДистрибуторов;
(б) ЛюбыенесовместимостиПродуктаиз-затехническихусовершенствованийи/илиизменениятехнических
норм;
(в) Любыеухудшенияработыдисплея, вызванные изнашиваниемневосстановимых частей, такихкак
панельЖКДи/илиподсветкаит.(например,изменениевяркости,изменениевравномерностияркости,
изменениевцветности,изменениевравномерностицветности,изменениевпикселах,включаявыгоревшие
пикселыит.д.);
(г) ЛюбыедефектыПродукта,вызванныевнешнимоборудованием;
(д) ЛюбыедефектыПродукта,прикоторыхоригинальныйсерийныйномербылизмененилиудален;
(е) ЛюбыедефектыПродукта,вызванныепротеканиембатарейки;
(ж) Любые естественные ухудшения продукта, в частности, вызванные износом расходных частей,
принадлежностей и/илиприспособлений(например, батареек, кнопок, вращающихся частей, пульта
дистанционногоуправления,кабелей,Руководствапользователяит.д.);и
(з) Любыедеформации,изменения цвета и/или коробления внешнейповерхности продукта, включая
поверхностьпанелиЖКД.
ЧтобыполучитьтехническоеобслуживаниеврамкахГарантии,Первоначальныйпокупательдолжендоставить
ПродуктместномуДистрибутору,оплативперевозку,вегооригинальнойупаковкеиливдругойсоответствующей
упаковке,обеспечивающейравноценнуюстепеньзащиты,принимаявовниманиерискповрежденияи/илиутерю
притранспортировке.ПризапросетехническогообслуживанияврамкахГарантииПервоначальныйпокупатель
долженпредоставитьсвидетельствопокупкипродуктаидатыпокупки.
Гарантийныйпериоддлялюбогозамененногои/илиотремонтированногопродуктаврамкахГарантииистекаетв
концезавершениясрокадействияоригинальногоГарантийногопериода.
EIZO ИЛИДИСТРИБУТОРЫНЕНЕСУТОТВЕТСТВЕННОСТИЗАЛЮБЫЕ ПОВРЕЖДЕНИЯ ИЛИУТЕРЮ
ДАННЫХИЛИДРУГОЙИНФОРМАЦИИ,ХРАНЯЩИХСЯНАКАКИХ-ЛИБОНОСИТЕЛЯХИНФОРМАЦИИИЛИНА
ЛЮБЫХДРУГИХЧАСТЯХПРОДУКТА,КОТОРЫЙВОЗВРАЩЕНEIZOИЛИДИСТРИБУТОРАМДЛЯРЕМОНТА.
EIZO И ДИСТРИБУТОРЫ НЕ ДАЮТ НИКАКОЙ ДА ЛЬНЕЙШЕЙ ГАРАНТИИ, ВЫРАЖЕННОЙ ИЛИ
ПОДРАЗУМЕВАЕМОЙ,ОТНОСИТЕЛЬНО ПРОДУКТАИЕГОКАЧЕСТВА, ТЕХНИЧЕСКИХХАРАКТЕРИСТИК,
ТОВАРНОСТИИЛИСООТВЕТСТВИЯДЛЯКАКОГОИБООПРЕДЕЛЕННОГОИСПОЛЬЗОВАНИЯ.НИПРИ
КАКИХУСЛОВИЯХEIZOИЛИДИСТРИБУТОРЫНЕНЕСУТОТВЕТСТВЕННОСТИЗАЛЮБОЙСЛУЧАЙНЫЙ,
КОСВЕННЫЙ,СПЕЦИАЛЬНЫЙ,ПОБОЧНЫЙИЛИИНОЙУЩЕРБ(ВКЛЮЧАЯ,БЕЗОГРАНИЧЕНИЙ,УЩЕРБИЗ-
ЗАНЕПОЛУЧЕННОЙПРИБЫЛИ,ПРЕРЫВАНИЯБИЗНЕСА,ПОТЕРИКОММЕРЧЕСКОЙИНФОРМАЦИИИЛИ
ЛЮБЫЕДРУГИЕФИНАНСОВЫЕПОТЕРИ),ВОЗНИКШИЙИЗ-ЗАИСПОЛЬЗОВАНИЯИЛИНЕВОЗМОЖНОСТИ
ИСПОЛЬЗОВАТЬ ПРОДУКТ ИЛИ В ЛЮБОЙ ДРУГОЙ СВЯЗИ С ПРОДУКТОМ, ЛИБО ОСНОВАННЫЙ НА
КОНТРАКТНЫХОТНОШЕНИЯХ,ГРАЖДАНСКИХ ПРАВОНАРУШЕНИЯХ, НЕБРЕЖНОСТИ,ПРИЧИНЕНИЯ
УЩЕРБА ТРЕТЬЕЙ СТОРОНЕ ИЛИ ЧЕМ-ЛИБО ЕЩЕ, ДАЖЕ ЕСЛИ EIZO ИЛИ ДИСТРИБУТОРЫ БЫЛИ
УВЕДОМЛЕНЫ О ВОЗМОЖНОСТИТАКОГОУЩЕРБА. ЭТО ИСКЛЮЧЕНИЕТАКЖЕ ВКЛЮЧАЕТ ЛЮБЫЕ
ОБЯЗАТЕЛЬСТВА, КОТОРЫЕ МОГУТ ВОЗНИКНУТЬВРЕЗУЛЬТАТЕ ТРЕБОВАНИЙТРЕТЬЕЙ СТОРОНЫ
В ОТНОШЕНИИ ПЕРВОНАЧАЛЬНОГО ПОКУПАТЕЛЯ. СУЩЕСТВОМ ЭТОГО ПОЛОЖЕНИЯ ЯВЛЯЕТСЯ
ОГРАНИЧЕНИЕПОТЕНЦИАЛЬНОЙОТВЕТСТВЕННОСТИEIZOИДИСТРИБУТОРОВ,ВОЗНИКАЮЩЕЙИЗ-ЗА
ЭТОЙОГРАНИЧЕННОЙГАРАНТИИИ/ИЛИПРОДАЖ.
60
Appendix
有限责任保证书
EIZO NANAO 有限公司
以下简称
EIZO
)
EIZO 授权的经销商
以下简称
经销商
)
接受并依照本有限责任保证书
以下简称
保证书
)
之条款
向从 EIZO 和经销商购买本文中所规定产品
以下简称
产品
)
的原买方
以下称
原买方
提供保证
在保证期
规定如下
如果原买方发按本产品所附使用说明书
以下简称
用户手册
)
所述方式正常使
用本产品过程中
本产品出现故障或损坏
EIZO 和经销商根据其独自的判断免费修理或更换该产品
本保证期限定为 (i) 自本产品购买之日起的五 (5) 年期间或限定为到达
ii
使用本产品 3 万小时的期限
以下简称
保证期限
)
但本产品的液晶显示屏
LCD
的保证期限定为自本产品购买之日起的三 (3) 年期间
EIZO 和经销商将不向原买方或任何
第三方承担本保证书所规定之外的与本产品有关任何责任或义务
本产品的任何部件停产 (7) 年后
EIZO 和经销商将不再保留或保管任何这类部件
维修显示器时
EIZO 与经销商将使
用符合我方质量控制标准的替换零件
本保证书仅对于设有经销商的国家或地区有效
本保证书并不限定原买方的任何法律权利
无论本保证书的任何其他条款如何规定
对于任何下列情况之一
EIZO 和经销商将不承担本保证书规定责任
(a) 由于运输损
改装
改动
滥用
误用
意外事
错误安
灾害
维护不善和 / 或由除 EIZO 和经销商以外的
第三方进行不适当的修理造成本产品的任何故障
(b) 由于可能发生的技术变更和 / 或调整造成本产品的任何不兼容性
(c) 由于诸如液晶显示屏
LCD
/ 或背灯等消耗品部件的老化造成的任何显示性能低劣
亮度变化
亮度均一性变化
色彩变化
色彩均一性变化
如烧伤像素等像素缺陷
(d) 因外部设备造成本产品的任何故障
(e) 因本产品的原序号被改变或消除造成本产品的任何故障
(f) 因电池液体泄漏造成本产品的任何故障
(g) 本产品的任何正常老化
尤其是消耗品
附件和 / 或附加装置
如电池
按钮
旋转部件
遥控器
电缆
用户手册等
以及
(h) 本产品表面包括液晶显示屏
LCD
表面的任何变形
变色和 / 翘曲
为了获得本保证书规定的服务
原买方必须使用原包装或其他具有同等保护程度的适当包装将本产品运送到当地的经销商
并且预付运费
承担运输中的损坏 / 或损失的风险
要求提供本保证书规定的服务时
原买方必须提交购买本产品和标
明此购买日期的证明
按本保证书规定进行了更换和 / 或修理的任何产品的保证期限
将在原保证期限结束时终止
在返回给 EIZO 和经销商进行修理后
任何产品的任何媒体或任何部件中储存的数据或其他信息发生任何损坏或损失
EIZO 和经销商将不承担责任
对于本产品及其质量
性能
可销售性以及对于特殊用途的适合性
EIZO 和经销商不提供其他任何明示或暗示的保证
使用本产品或无法使用本产品或因与本产品有任何关系
无论是否根据合同
而造 : 任何附带
间接
特殊
之发生的或其他的损害
包括但不仅限于
利润损失
业务中断
业务信息丢失或其他任何金钱损失
以及侵权行为
过失
严格赔偿责任或其他责任
即使已经 EIZO 和经销商提出了发生这些损害的可能性
对此 EIZO 和经销商概不承担责
本免责条款还包括因第三方向原买方提出索赔而可能发生的任何责任
本条款的本质是限定由于本有限责任保证书 /
销售本产品所发生的 EIZO 和经销商的潜在责任
61
Appendix
China Measures for RoHS Compliance in ChinaRoHS
关于电子信息产品污染控制标识
本标识根据「电信息产品污染控制理办法」,适用于在中人民共和国销售的子信息产品。标识中
数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会
产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。
有毒有害物质或元素的名称及含量
部件名称 有毒有害物质或元素
(Pb)
(Hg)
(Cd)
六价铬
(Cr(VI)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板 ×
机箱
液晶显示器 × ×
其他 ×
:表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。
× :表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。
( 企业可在此处 , 根据实际情況对上表中打“×
的技术原因进行进一步说明 )
4th Edition-May, 2012
03V23307D1
(
U.M-FS2331
)
Copyright © 2010-2012 EIZO NANAO CORPORATION All rights reserved.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eizo Foris FS2331 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eizo Foris FS2331 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Eizo Foris FS2331

Eizo Foris FS2331 Installatiehandleiding - Nederlands - 2 pagina's

Eizo Foris FS2331 Installatiehandleiding - Deutsch - 2 pagina's

Eizo Foris FS2331 Gebruiksaanwijzing - Deutsch - 63 pagina's

Eizo Foris FS2331 Installatiehandleiding - English, Français - 2 pagina's

Eizo Foris FS2331 Gebruiksaanwijzing - Français - 63 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info